Theater developmental notes - The Tile's
-
Thank’s Ghost,
now that sounds interresting.
I think I’ve already found the explaination of how to calculate ground resolution:
http://msdn.microsoft.com/en-us/library/bb259689.aspxLook like I’ve to study it well to be able to create an working excel file.
@Arty
you see there are differently possibilities. (like always.)Cheers,
LS -
He forgot 2 major factors… so those calculations are proximity also.
-
Another thing I’m curious about tiles is how do you guys get G##gle Earth tiles for reference?
To be more exactly:
- which software do you use to get the tiles? (is anybody using “FSEarthTilesV1_0”?)
- and how do you get the right scale? (yeah, I know 1 Tile is 1 km)
- further tips and tricks?
Cheers,
LSMan, you sure are “curious”….LOL!!!
1. We don’t get tile’s,we make them…… I have yet to find a Tile Store for Falcon tile’s,maybe I should check Home Depot??? Psst…hey,you got any Falcon Tile’s?? Sale’s clerk runs away and call’s 911!!!
2. Scale is determined by the Falcon elevation code and yes 1 tile cover’s 1 km, this is the mesh that is used
to build the wire frame that the tile is rendered over…
3. I’ll stick to tile’s here,because that is the topic…but,be aware that the mesh is NOT the map grid!!!'Kay some comment’s, maybe some insight.
SHE duz’nt care what canvas size you use,you can use 32x32 or 4096x4096 or mix and match. As long as they are divisible by 4 SHE will render them to the 1 km mesh.BUT, here is the caveat and remember this.
SHE use’s List’s to decide where and when she render’s these image’s(I’ve explained this B4,but here we go again).
Now this list is built when you first start the game and I believe it is still held in RAM in BMS…maybe even CPU still(Would like to see it Page Filed if at all possible…hint,hint).This become’s a great drain on resource’s (read FPS) when it come’s to making her render one tile 10K’s time’s as compared to rendering 10K’s tile once.So the bigger the bytes you put on the list,so to speak,the more time it take’s for her to Recall and send to DX to send to your GFX to send to your monitor…Get It???About the Image resolution…she don’t care…she just passe’s that on to DX If DX can handle it and your GFX card can handle it and your monitor can handle it…your 'kewl!!!
-
Does SHE wear thongs?
-
@theOden:
Does SHE wear thongs?
Yes, Bonedust does!!!;):D
RAM22
-
He forgot 2 major factors… so those calculations are proximity also.
???
please explain…1. We don’t get tile’s,we make them……
Sure, sure, … that’s why I’ve said “for reference”.;)
2. Scale is determined by the Falcon elevation code …
so how to use which tools to match the Falcon scale?
atm. there are explained 2 differently ways to do it, Arty’s and Ghost’s way.3. ….but,be aware that the mesh is NOT the map grid!!!
Already known here. (sometimes I read your posts. )
'Kay some comment’s, maybe some insight.
SHE use’s List’s to decide where and when she render’s these image’s…
So the bigger the bytes you put on the list,so to speak,the more time it take’s for her to Recall and send to DX to send to your GFX to send to your monitor…Get It???Thank’s for insight, Dave.
Sounds like the more textures (-sets) are used, AND the bigger the theater, … the longer it takes.
About the Image resolution….she don’t care…she just passe’s that on to DX If DX can handle it and your GFX card can handle it and your monitor can handle it…your 'kewl!!!
Got it.
@RAM22:
Yes, Bonedust does!!!;):D
RAM22
Cheers,
LS -
Lens type. Angle of cam and target area, and height.
-
Lens type. Angle of cam and target area, and height.
Uhmm, OK, so you think to get (nearly) correct scaled reproducible results will be impossible?
I think all those texture calculations are proximity to some point, more or less,
but better than to go just “by eye”.
What really counts to me are reproducible results and maybe easier handling of that stuff.Cheers,
LS -
ANYTIME you change ANY data in those two file’s you MUST rebuild your <theater>.thr file against the new data.Get it???
No EGO demer</theater>
We do this with Tacedit? is there a way via Terrain editor?
Edit:Ignore found it in terrain editor
Go to tools first choice… Make THR file… Right?
Re Edit just tried it…
I reverted from water to plain the tileset.
The road bridge river path is there…
I saved the bin
I saved the thrI opened the TE I had made the damn GU’s continue to pass over the river…
Should I redo the damn mission as when I saved it it had the old data?
Does the order of the paths affect? I mean I have to have them one after the other if in the middle I have a bridge or something else? or if a road of 5 parts is stored inside as:
1.first part
2.second
3.forth
4.third
5.fifthAnything else?
Edit again done a new mission same behavior.
-
Go to tools first choice… Make THR file… Right?
I’ve not been there yet, but to my understanding the answer is .
Cheers,
LS -
Found this: https://www.benchmarksims.org/forum/showthread.php?11845-What-do-we-know-about-campaigns-part-2/page2
Seems it’s unresolved and I struggle for nothing all those days…
-
Arty, just a stupid idea from an terrain noob like me.
What if you simply use a plain tile with a road-river-bridge path and a defined water area for the river?
If it works you can paint water/sea texture on it.Cheers,
LS -
Arty, are you sure your theater where you’re working has not L0 ruined?
just for curiosity
cheers
dema
-
Nice thread Demer !
-
@Lazy Done it no-go… they pass above the river like it’s not there.
I checked the links from Terain editor and I didn’t had bidirectional links. I created them saved tested no errors. Gone to Falcon created new mission… dong they travel above the river…As I see it is like they follow only links on my new tiles and pass from the center of the tiles. For the previous created ones they seem to follow the paths…
Arty, are you sure your theater where you’re working has not L0 ruined?
just for curiosity
cheers
dema
I believe it’s ok as I was told…
How can I test-check this?EDIT: LOL a mistake misspell on the picture… Read dashed line was meant to be Red dashed line.
-
AFIK when a campaign doesn’t work it means L0 is ruined, and this happens when you convert wrong a theater from the past conversions.
but some devs can explain better my opinion…
cheers
dema
p.s. try your esperiments in kto theater
-
GU’s only move through the middle of the tile. They enter in the middle at the N/S/E/W, move to the center of the tile and exit out at the N/S/E/W in the middle of the tile.
It doesn’t matter if you draw a road path that is not in the middle of the tile, they will not follow it. There is no reason to make multiple road paths on one tile that tries to follow some awkward path that follows the artwork. The GU’s will not follow it.
As you can see in your pic, the GU’s are following the middle of the terrain tile like they’re supposed to. Your path is drawn at the upper third of the tile. They don’t care about that path as that not how the code moves them. They only know there is a road path on that tile and they will use the middle of the tile to move.
Your bridge object should be centered on that terrain tile not up at one third of the tile.
GET IT NOW??
RAM22
-
Yea I got it thanx… figured it but wanted confirmation and make it a big deal so others don’t waste the same amount of time as me, (E$&#$#&C#$#&%CV%N *$) and for Dev’s if they have something on the works for it…
@Dema I work on Aegean and for Aegean there is no Campaign and couldn’t be one as the links are fubared…
Is there going to be any fix on it?
-
…
@Dema I work on Aegean and for Aegean there is no Campaign and couldn’t be one as the links are fubared…Is there going to be any fix on it?
the part with links being fubar shouldn’t be true, not at all. while the campaigns were inop, the links, the tiles and associated objcetives were all meticulously checked and done in the OF version by Phoenix himself…. if these are really fubar now, then it must be something in between got these whacked. i suggest you compare yours vs the v4x release for OF4.3 for the links etc!
-
the part with links being fubar shouldn’t be true, not at all. while the campaigns were inop, the links, the tiles and associated objcetives were all meticulously checked and done in the OF version by Phoenix himself…. if these are really fubar now, then it must be something in between got these whacked. i suggest you compare yours vs the v4x release for OF4.3 for the links etc!
Yes, Sorry u are right… I rephrase that, The Roads network has major problems.
Well the Aegean I have is based on the one converted and listed in this forum in the theaters Area. I don’t know if it is the one based on OF.
If u open it with Terrain Editor go to the objectives window and ask to test the links u will get some error, in Ankara IIRC.
Now if u open it with Tacedit is easier to look at the links… TE is a pain to unzoom and see the whole map with links, but u can easily see that the roads path network will not work cause the paths are not connected from one tile to the other…
Those sleepless nights headbanging to figure out Falcon ghosts and skeletons drive u crazy… u forget what u knew and u end up totally messed up…