Weapon Delivery Planner released
-
Issue has been fixed in the new released version: 3.6.1
See here for the complete changelog:
https://www.benchmarksims.org/forum/showthread.php?5293-Weapon-Delivery-PlannerEnjoy,
Falcas
-
@Arty, Thanks for the reports and testing.
Gr Falcas
-
The zip file appears to be damage. I open the zip but it says “unexpected end of the file”.
Is it just me?
Thanks
-
Yes. Download it again.
-
A few things - questions:
Falcas could u please add the link toy your youtube tutorials in the First post?
In the DataCard / Weapons Section / Fields: SNSR & OPS time.
SNSR is for the Weapon Sensor?OPS time is what exactly? <-Edit: scrap that I found it in the Manual.
For the following the same what those fields mean and what data goes there like alt time degrees?
Coordination Card Left page top right section
Fields:
Change
CC <-Edit: Mission Commander
DEP CC <-Edit: Deputy Mission CommanderADMIN section
Fields:
TRANSIT LVL <-Edit: scrap that I found it
MSAA <- Minimum Safe Approach Altitude
FORCE QNH (and what the difference between STD QNH?) <-Edit: scrap that I found itLINK 16 section where does it get data from?
Fields:
NETWORK
CRYPTO
NTR
TIME
FC
MCSPINS section
C/S = Country/Side?
SAFE AREAHAVEQUICK section
Fields:
CP TODRight Page top section
Fields:
TRANSIT ALT <-Edit: scrap that I found it
REC.ALTCODEWORDS section
AMR LOW/MED/HIGH : found:ACCEPTABLE MERGE RATIO
WF ZONE : found: Weapons Freethanx in advance.
-
Hi there, I seem to be having a few problems with the TARGET section of the DTC. Firstly how is the target list populated? If I double left click on the target list (which is blank) it takes me to the following screen. Should I be seeing something here? Also if I click any button on this screen WDP errors? As shown.
I’ve checked c+ and dot net and all is fine. I can provide more detail but wanted to check this wasn’t down to me doing something stupid. I also noted that in the popup screen . When displaying the MAP including symbology VIP etc the map is incorrect area?
-
Here is the error report for above post.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
at WeaponDeliveryPlanner.fclsTargetSelection.DrawRecon()
at WeaponDeliveryPlanner.fclsTargetSelection.chbNr_CheckedChanged(Object sender, EventArgs e)
at System.Windows.Forms.CheckBox.OnCheckedChanged(EventArgs e)
at System.Windows.Forms.CheckBox.set_CheckState(CheckState value)
at System.Windows.Forms.CheckBox.OnClick(EventArgs e)
at System.Windows.Forms.CheckBox.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18444 built by: FX451RTMGDR
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
–--------------------------------------
WeaponDeliveryPlanner
Assembly Version: 3.6.1.0
Win32 Version: 3.6.1.0
CodeBase: file:///C:/WeaponDeliveryPlanner/WeaponDeliveryPlanner.exeMicrosoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 11.0.50938.18408 built by: FX451RTMGREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dllSystem
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dllSystem.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dllSystem.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dllSystem.Drawing
Assembly Version: 4.0.0.0 -
First want to say great program. I have been using it on my win xp desktop with no problems untill i had to reinstall the system. Now when i run wdp I get this any help will be greatly appreciated.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at WeaponDeliveryPlanner.cntDTC.FillMFD_AG()
at WeaponDeliveryPlanner.cntDTC.FillMFD()
at WeaponDeliveryPlanner.cntDTC.Camp_TE()
at WeaponDeliveryPlanner.cntDTC.GetCampFile()
at WeaponDeliveryPlanner.flcsMain.flcsMain_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.239 (RTMGDR.030319-2300)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
–--------------------------------------
WeaponDeliveryPlanner
Assembly Version: 3.6.1.0
Win32 Version: 3.6.1.0
CodeBase: file:///C:/WeaponDeliveryPlanner/WeaponDeliveryPlanner.exeMicrosoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 10.0.30319.1 built by: RTMRel
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dllSystem
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.258 built by: RTMGDR
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dllSystem.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dllSystem.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.235 built by: RTMGDR
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dllSystem.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dllSystem.Runtime.Remoting
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dllSystem.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dllSystem.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dllBMSUtils
Assembly Version: 1.5.0.0
Win32 Version: 1.5.0.0
CodeBase: file:///C:/WeaponDeliveryPlanner/BMSUtils.DLLSystem.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dllSystem.Transactions
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dllSystem.EnterpriseServices
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dllSystem.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dllDatabase
Assembly Version: 1.3.0.0
Win32 Version: 1.3.0.0
CodeBase: file:///C:/WeaponDeliveryPlanner/Database.DLLLzssManaged
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/WeaponDeliveryPlanner/LzssManaged.DLLLzssNative
Assembly Version: 0.0.0.0
Win32 Version:
CodeBase: file:///C:/WeaponDeliveryPlanner/LzssNative.DLL************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.For example:
<configuration></configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box. -
I think it is fixed. WDP appears not to like virgin call sign files. I flew for a moment and within falcon made a few settings for mfd to dtc. Now works fine.
-
Can anyone help.clarify if the.TARGET section of dtc is working as per my post above?.
-
Hi,
Sorry for the late reply. A lot of work lately and in that case I am away from home.
-
Hi there, I seem to be having a few problems with the TARGET section of the DTC. Firstly how is the target list populated? If I double left click on the target list (which is blank) it takes me to the following screen. Should I be seeing something here? Also if I click any button on this screen WDP errors? As shown.
I’ve checked c+ and dot net and all is fine. I can provide more detail but wanted to check this wasn’t down to me doing something stupid. I also noted that in the popup screen . When displaying the MAP including symbology VIP etc the map is incorrect area?
Hi Funkster,
Your C++ and dot Net installations are fine, else WDP wouldn’t run
The target list is working, its just the question why it doesn’t work for you.Will be back to you soon.
gr Falcas
-
I think it is fixed. WDP appears not to like virgin call sign files. I flew for a moment and within falcon made a few settings for mfd to dtc. Now works fine.
Good to hear that you got it Bubba.
I’ll have a look at the virgin callsigns.Gr Falcas
-
Hi Falcas,
I like to save my datacard info to my Google Drive account to make it easy to open them on my Android tablet. I’ve gone into the WDP Options and changed the Datacard save directory to Google Drive. However, when I save the datacard, it saves the .bdc file, the comm and datacard jpegs, and the target list jpeg to my Google Drive directory but saves the *Map.jpg and the airport diagram gifs to the original default (local) directory. Also, if I hit the “Cards Directory” button in WDP it opens the original default (local) directory and not the Google Drive directory.
Not a big deal as the primary thing I’m after (the datacards) are saved properly but I wanted to point it out.
- Morphine
-
Hi Falcas,
First of all, great software thanks for the efforts!
I am having the exact same problem with Funkster, my TARGET is not populated, when I try to click show names, I get a .Net error that Funkster mentions.
Will be glad if you can give a hand.
Cheers,
Ikarus
-
This has been fixed in the next update.
Gr Falcas
-
I’ve got a strange error when installing. It says “please verify that file exists”, whereas the file did exists at the location the error mention.
Please help. -
-
Hi there, I seem to be having a few problems with the TARGET section of the DTC. Firstly how is the target list populated? If I double left click on the target list (which is blank) it takes me to the following screen. Should I be seeing something here? Also if I click any button on this screen WDP errors? As shown.
I’ve checked c+ and dot net and all is fine. I can provide more detail but wanted to check this wasn’t down to me doing something stupid. I also noted that in the popup screen . When displaying the MAP including symbology VIP etc the map is incorrect area?
when I press “go on” key,it is nothing.all empty.can not run anything.only press cancel.
-
I’ve got a strange error when installing. It says “please verify that file exists”, whereas the file did exists at the location the error mention.
Please help.I know that i’m not Falcas but try to run it as Administrator. If you have Vista/7/8 windows version…. sometimes even when you are an admin some programs don’t run as the would…