Livrot Mic Command - Preview Release
-
Well, maybe the freeware version output must be changed, i thought it would work using sendkeys but it looks like it must be send input as for the makros.
Right click on the ‘stop’ hotkey button and check the ‘temporary eating’ checkbox, as i replied before to you. Please read my answers
Thanks.
I’m sorry but in fact I use you all as beta testers, it seems
But the coin has two sides as always, you all have great influence on the program. Just tell me what you would like. -
Gents, please excuse. I made a big mistake.
The html connection strings were still pointing to the test website.
A new corrected version is out now. Please download it directly from livrot.com using your log in credentials.
DO NOT use your versions ‘check for updates’ / ‘go to livrot.com’ buttons.
I will disable the test site now to avoid further confusion.
Please excuse these shortcommings of mine and I hope the confusion was limited to just some of you.
-
- Site updating till forum time 17.00 -
-
Done.
-
Okay, just downloaded the newer version. When I ran it, it said I needed to input my credentials, so I put in the same details I used on the site. It came back with an error: not enough hardware information to register. contact livrot.com.
Have I missed something obvious again?
-
I just checked here and the latest version works for me.
It uses the same routines as before. Are you runnnin windows on linux now?? That will not be accepted by LMC.
If hardware info is not enough to create a license key request you get that message.
Did you uninstall completely before? -
I didnt uninstall, at that. Im running windows in what I assume is the normal manner, by installing it from a disc…
Ill try deleting the old folder completely and starting again.
EDIT: I uninstalled the program using the control panel, then installed again. I still get the same error. How can I see what hardware info I have??
-
Registry Keys, Driver Info, …
These informations are not saved on the website. The website uses these info to create a valid key for your machine.
If you have made a backup of your first key, it should work until you change three hardware components.
(GFX card and bios update is okay.) Then you need to use up another license key (you have three per update).I will look into this tomorrow. If it worked before and now no more … I did not change any of these routines. Maybe a ghost.
-
Well it did not ask me for a license key before!
Now that it is asking for a license key, it says that there is not enough hardware info. Ill try running it as an admin and see if that fixes it…
Running as an admin, it still tells me that there is not enough hardware info. can I look at my registry to see what information it would be looking for?
-
No. The copy protection mechanics won’t be diclosed.
The freeware version needs no copy protection and does all you need for BMS.
For me and others the full version works well.
If you have some special tools running in the background that obscure your registry or whatever might exist out there, I can not help you.What is the Version number of your download ? (file and if different log info at the beginning)
-
Hi Livrot,
Just caught up with this thread and your software and it seems very nice! Thanks alot for sharing it with us, man!
Could use a little help thought.
I’ve installed it and loaded my shoot profile. The recognition works flawlessly and, testing it on a notepad file, it types in all the commands.
But when I jump in the pit, the first command I give forces the sim to jump back to desktop (without CTD) and does not apply the commands in the sim.
I’m using the “listen once” and the “always listen” mic commands together.
Could you point me in the right direction?
EDIT: just found out that even in the UI, if I give a voice command, it also goes back to desktop.
Thx again for a wonderful piece of software, mate
Cheers,
Nuno
-
Hi Nuno, thanks for your kind words.
Blu3wolf reported same thing. I will change the plain text output to the same as makro output. It will solve the problem I bet.
Might take a week though cause I’m very busy, atm. You may try the full version if you want.Please excuse the inconveniences.
btw:
The ‘always listen’ checkbox overrides the ‘listen once’ checkbox. In the future the two radio buttons disappear when checking always listen.Livrot
-
Thanks alot for the fast reply, mate! Great job you’re doing here!
Best regards
-
No. The copy protection mechanics won’t be diclosed.
The freeware version needs no copy protection and does all you need for BMS.
For me and others the full version works well.
If you have some special tools running in the background that obscure your registry or whatever might exist out there, I can not help you.What is the Version number of your download ? (file and if different log info at the beginning)
1.0.140905 beta. No tools to obscure the background, and an almost fresh copy of windows. was formatted only two months ago.
Im glad the freeware version does all I need for BMS, but at present at least it doesnt do any of it…
I guess Ill give you my machines hardware info and you can tell me if its an OS incompatibility or whatever.
Im running Windows 7 Home Premium, 64 bit. Windows is activated. Core i7 960 @ 3.20 GHz. 12.0 GB of RAM installed. 6 various HDDs installed, using AHCI. GTX 580 SOC Gigabyte graphics card. Two samsung monitors connected. Varying joysticks and panels depending on what I am running at the time, through a 7 port USB adaptor.
Im not going to include a copy of my registry here, however.
I also note that trying to use the username and password ‘asdf’ gives me exactly the same error about not having enough hardware information.
-
Ok, Blu3wolf. I will investigate this and maybe lower the minimum requirements.
It is all selfmade and first time … program, website, copyprotection, all …
Future applications will definitely start out on a more solid base. Sorry for your bad experience with this so far. -
Good news:
Changelog:
Blu3wolf, thanks I discovered that only a few missing infos could trigger what you have experienced. It should work now for you.
The plain text commands have been turned into ‘send input’ calls. They should work now in BMS (not only in notepad).Also the input language will now be saved with the profile and can be seen under editor/language.
freeware and full Version updated are ready for download.
Also the website had connection recognition problems. Fixed that, too.
Thanks for being so patient, guys.
-
Generated a license key for me…!! A good start. Will test it out now and see if it works with BMS!
EDIT: well it crashed trying to open the editor. It says it saved a log, but Im not sure where too?
which directory should I look in?
EDIT: Okay, found it the easy way. Task manager says where everything is running from…
********** 7/09/2014 9:58:57 AM ********** Exception Type: System.NullReferenceException Exception: Object reference not set to an instance of an object. Source: unclear - unhandled exception Stack Trace: at __T9_Speech.recognizer.listen_cancel() at Livrot_MicCommand.MainWindow.Initialize_EditorSR() at Livrot_MicCommand.MainWindow.editor(String t) at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised) at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args) at System.Windows.Controls.Button.OnClick() at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e) at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target) at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised) at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent) at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target) at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised) at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args) at System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args) at System.Windows.Input.InputManager.ProcessStagingArea() at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport) at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel) at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, WindowMessage msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler) at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam) at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg) at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame) at System.Windows.Application.RunInternal(Window window) at System.Windows.Application.Run() at Livrot_MicCommand.App.Main()
-
Ok, thanks.
It just happened once here on my internet machine - maybe the empty commandlist is not configured as it should after registration, etc.
Please just try again. Or click settings first.Gonna check this.
To get to the apps folder easily just click editor/‘is soundfile’, click on the adressbar folder icon and copy the adress bar path into windows explorer. how easy
I will make a button on settings/log to jump to that folder.
-
It successfully ran after that. Happened just the once, as you say. Ive just gone through and trained my speech again, as I was getting low confidence - The system was recognising Chainsaw over Fence In!
Going to test it again now.
-
Hope you can make something out of it now, after all that mess.