Livrot Mic Command - Preview Release
-
forgot to say: sorry for the inconvieniences.
Now I have removed all falcon profiles from the website and uploaded my incomplete profile.
Wingedsky, I hope that you are willing to upload your profiles again with the above fix. With or without soundfiles.
When you should have a version with soundfiles just tell me and I remove your previous uploads again.Thanks for all your support!
-
new version: 1.141109
lots of improvements. new mic modes. toggle option for macros.
Livrot
-
new version: 1.141112
bad error on the new mic modes fixed.
Livrot
-
I’m recording video tutorials for LMC now in English, German, French.
This may take a week and I hope that one can survive the laughter
Livrot
-
There is a new error on the listen once mode. Going to fix it today. Please use ‘listen while pressed’ or for TS ‘listen while not pressed’ instead.
Have a nice flight.
Livrot
-
new version: 1.141113 mic mode ‘listen once’ works again. rearranged settings -> main and settings -> global.
-
A user just pointed out to me that macros are not language independent.
So many thanks for that information.
I will expand the editor language converter to be able to convert macro output just the same as plain text output.
But I have to finish the tutorials first, so this will take two weeks.Remember that you can load VAC and keyspeech profiles in the meantime to get going.
Many thanks again!
-
I am about to upload a new version in the next hour:
new feature: macro keypress conversion from one input language to another - finally wingedsky’s profile can be converted to english (follow the tooltips under editor / language)
Thrustmaster Cougar sometimes was not recognized as a joystick (it exists as mouse and keyboard device in the device list, too) fixed that finally.
Thanks to Silver for pointing me on this issue.while recording the tutorials I have encountered and removed these errors:
LMC settings ‘Low Level’ hotkeys (mic, mic mode, …) showed message ‘bad hotkey device number’ when loading a profile without any hotkey devices in it and were erased afterwards. Fixed.
‘Low Level’ hotkey triggering did not recognize the sequence ‘train’ in ‘trtrain’ or ‘tratrain’ or the likes. Fixed.
‘Low Level’ hotkey recording: holding down any key and a DX button until recording stops did let the first key repeat event through. Fixed.
editor single - audio feedback / response: #10 up to #99 jump didn’t work (double digits). fixed.
editor pop up menu command added: placeholders raw / replaced Ctrl - P
the text numbers of the commandlist’s comment texts was decreased upon reload. fixed.
plaint text output now put on a stack off 100 outputs maximum - before only 1 at a time.
–> response calls to other commands (#a…) now do work right.
–> windows system hotkeys now can trigger the plain text outputLivrot
-
This post is deleted! -
Thanks Livrot
Very busy at that time with RL, I hope to be able to try your work as soon as possible and …fly again!Windblow
-
Thanks to you for your great software, my friend.
-
Thank you for your kind words!
The new Version V1.141127 is available now.
Now I can finish the tutorials without having to hide errors : ) they are all fixed at the moment.
cheers!
Livrotmaybe Wednesday at max Friday tuto’s are done.
-
The tooltip for language change mentions only ‘plain text’ command output conversion. I have to add ‘macro’ commands still. But it works for macros too, now.
-
I have now been starting to record the macro tutorial.
This has uncovered another pile of garbage, ahem.
I have a new version ready and working, including very nice speech recognition ‘on the fly’ temp macro speech commands working in a fascinating and simple way.
I hope to record the macro tutorial for it tomorrow and upload a whooping 30 tutorials (3 languages x 10 tutos) on claus’s day or sunday - depends on the air here (at my home not this nice forum).
T. -
well, the air is ok, but the errors keep jumping up.
fixed so far:
temp macro speech commands working
pause recording working
improved tooltip on the macro event checkboxes
small change on the macro delay sliders down to 1 ( using cursor keys on the slider)coming soon. working hard.
T.
-
Another fix applied:
focus is back on the command list.
If you have one item in focus color in the command list ( last clicked item - left or right click )
you can use the editor hotkeys (copy cut paste del, … ) on the selected items.also coming soon.
T.
-
new version is out: V1.141128
focus for the commandlist, editor right click command hotkeys do work now (set the focus on the commandlist first)
delaytimes now shown in the commandlist
macros unbugged
new option to disable the auto stop delay timer for macro / hotkey recordinguploading 30 videos, preparing the channel (YT) and tagging them all, …
public available maybe tomorrow.cheers
Livrot
-
A Lot of work Livrot.
Thanks for that !Windblow
-
Video Tutorials are ready. Check the playlists for convenience.
French pilots with English knowledge will definitely prefer the English version.
https://www.youtube.com/channel/UCBXCnI15q4Y4Yn1lud5RSiQ/playlists
Thanks for your support.
Livrot
Edit: YouTube is still preparing the FullHD Version, so it might throw errors on these still.
-
Just got a request by PM:
Haven’t had the time to dive into this, but one thing came to mind: it seems I am only able to set 1 Mic hotkey. Is this correct?
If so: how do I deal with the difference between UHF and VHF commands? Those are two seperate hotkeys.
this was my answer - it may help others, too:
I do not really understand your question. You can only talk to the game using LMC.
If you want to trigger you mic hotkey using com switch up and also com switch down,
you need to create a standard hotkey for the mic which is not used by your BMS keystroke file (WIN + Ctrl + G ) - in red
then you simply create two new commands in the command list with either no phrase (a message box would annoy you in this case soon enough )
or better with a long phrase like ‘one two three four five six seven eight nine ten’ and then for the other command something similar stupid
you can be pretty sure that they would not get recognized by accident.now: right click on the first commands hotkey button and set it to low level plus record your com switch press. wait until the recorder stops automatically before releasing the com switch.
same way for the other command of course.using the macro version you can record a macro for the commands: Win + Shift + G
this would then trigger the mic hotkey for both buttons.–---------------------
And I want to add that using a simple key like ‘Shift A’ - remove it from the keystrokes list first! - you can use the free version just the same sending out the big ‘A’.