Set up for X52 Pro and Falcon 4 BMS 4.33.1 U5
-
I’ve been out of the loop on Falcon 4, so long in fact that I don’t remember much on how to play but I have a setup now that I can semi-perminately setup my joystick and throttle for a long period of time.
I have downloaded a few profiles, gopher, flounder. I understand flounders takes things to a more basic level and bases it’s setup on. I’m still in that mindset where I like to have keyboard functionality since I don’t know where everything is in the cockpit as it may take me awhile to learn it.
What I have:
BMS keyfile editor where I can import .key.
I also have the pr0 and .key files ( a couple of different sets to play with)
X52 Pro (SST software for the X52Pro software and drivers from Logitech. I think the version is 8.+what I want to figure out is the basic setup in BMS itself. I understand for the X52 Pro controller config, it is advisable to turn clutch off (uncheck) if I don’t use one.
under the advanced section in BMS and for the sake of using Flounder’s profile as an example. Even though his keyfile has practically nothing in it other than a few basic commands, let’s start with this.in Advanced Options, I set the field of view to slider - Saitek X52 Pro Flight Controller (0) and turn Reverse on.
Under Flight control tab, set Rudder Axis to Z Rotation Saitek X52 " " "
Throttle axis to Z Axis - Saitek X52 " " "
Pitch Axis Deadzone Y Axis - Saitek X52 Pro " " " deadzone small
Roll Axis Deadzone - X Asis - Saitek X52 Pro " " " deadzone small.My question about this is: Should this be set this way in BMS no matter which keyfile and PR0 file is used? I think I’m over complicating things and confusing myself on why things aren’t quite to my liking. This also may add to my problem of not setting the controller directx commands correctly (or the proper way) in site the excel spreadsheet.
What I like: I do like the full keyboard commands that’s in BMS - Full. But going straight to Flounders raises the learning curve that I get lost since it’s mostly cockpit button focused. Veteran flyers would likely have no issue. however, I’ve found no Saitek X52 Pro PR0 file that makes full use of the BMS-Full. I tried Gunny but it was made for Allied-Force (I believe) when when I tried using the mini stick on the throttle to control the MFD cursor, it would go continuously. I also used the small button next to it to select items. I have no idea how to do this in Flounders V5 profile.
I’m going to re-watch part II of the youtube video on the Falcon BMS keyfile editor on youtube so I can figure out how to map directX controls to the joystick or at least get a better understanding on how it works.
I’m guessing when mapping the joystick in the excel keyfile editor has to be done manually correct? In other words, commands assigned to the button doesn’t happen automatically?
Thanks. If I have any other questions I’ll post below your comments.
BTW other than Flounder and gophers are there any good Saitek X52 Pro PR0 and keyfile that’s recommended? I don’t mind editing a few things if I have to if the controls are good to start with. I’m not good currently at building from scratch.
I don’t use TrackIR and I don’t have TeamSpeak installed. But TeamSpeak could change if I can get online somewhere with a VFW.
-
in Advanced Options, I set the field of view to slider - Saitek X52 Pro Flight Controller (0) and turn Reverse on.
Under Flight control tab, set Rudder Axis to Z Rotation Saitek X52 " " "
Throttle axis to Z Axis - Saitek X52 " " "
Pitch Axis Deadzone Y Axis - Saitek X52 Pro " " " deadzone small
Roll Axis Deadzone - X Asis - Saitek X52 Pro " " " deadzone small.My question about this is: Should this be set this way in BMS no matter which keyfile and PR0 file is used?
The short answer on this is, “Yes.”
The longer answer, is that FOV in particular you may want to assign a different way if you find something that suits you better. Same with Rudder … if you need the twist rudder on Saitek, that’s fine, but if you have a separate rudder pedal setup, you would assign that instead.
In general, most people will have the following on an axis (as opposed to button based):
- Pitch
- Roll
- Rudder
- Radar Elevation
- Man Range (i.e. zoom for TGP)
- Throttle
Occasionally, in the right setup/circumstances the cursor slew would also be an axis (and, imho, it is preferred that way if you can execute it within your set up).
As far as full keyboard commands, that is an option even with someone else’s profile (mine or whomever else) IF it’s primarily a DX based profile. That is as long as the vast majority of the profile is based on directly assigning button actions to BMS commands … avoiding the use of intermediate keyboard emulation programs (Saitek SST, for example).
The way to do that is fairly simple. Take the DX button profile you like and copy ONLY the DX part of the keyfile to your preferred keyboard layout.
The keyfile is effectively two sections. One section is they keyboard presses the other is DX assignments. The DX assignments are always at the bottom and have a slightly different syntax because of the missing (not needed) keyboard key identification.
For example:
Keyboard command: SimTriggerSecondDetent -1 0 0XFFFFFFFF 0 0 0 1 “STICK: SECOND TRIGGER DETENT” …. where the bold part is what keyboard key we’re talking about. In this case 0XFFFFFFFF means “No Key Assigned”, but it could be whatever you want it to be.
DX Command: SimTriggerSecondDetent 14 -1 -2 0 0x0 -1So, for example, if you wanted Flounder’s DX HOTAS commands with a full keyboard functionality, take the default BMS Full Keyfile and replace everything from here down:
#=================================================================================== ################################################################# ### ### Full real TM HOTAS Couger DX button mapping,
With my DX commands, here:
#=============================DX LINES BEGIN HERE==================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -2 "========= HOTAS UNSHIFTED =========" SimTriggerFirstDetent 0 -1 -2 0 0x0 -1 SimPickle 1 -1 -2 0 0x0 -1 RecenterTrackIR 2 -1 -2 0 0x0 -1 SimMissileStep 3 -1 -2 0 0x0 -1 PrettyScreenShot 4 -1 -2 0 0x0 -1 SimHotasPinkyShift 5 -1 -2 0 0x0 -1 AFBrakesToggle 6 -1 -2 0 0x0 -1 SimToggleMissileCage 7 -1 -2 0 0x0 -1 SimArmMasterArm 8 -1 -2 0 0x0 311 SimSafeMasterArm 9 -1 -2 0 0x0 311 SimExtlMasterNorm 10 -1 -2 0 0x0 115 SimExtlMasterOff 11 -1 -2 0 0x0 115 AFGearUp 12 -1 -2 0 0x0 119 AFGearDown 13 -1 -2 0 0x0 118 SimTriggerSecondDetent 14 -1 -2 0 0x0 -1 SimCursorEnable 15 -1 -2 0 0x0 -1 SimRadarRangeStepDown 16 -1 -2 0 0x0 -1 SimRadarRangeStepUp 17 -1 -2 0 0x0 -1 SimRFNorm 18 -1 -2 0 0x0 310 SimTMSUp 19 -1 -2 0 0x0 -1 SimTMSRight 20 -1 -2 0 0x0 -1 SimTMSDown 21 -1 -2 0 0x0 -1 SimTMSLeft 22 -1 -2 0 0x0 -1 SimTransmitCom1 23 -1 -2 0 0x0 -1 SimCommsSwitchRight 24 -1 -2 0 0x0 -1 SimTransmitCom2 25 -1 -2 0 0x0 -1 SimCommsSwitchLeft 26 -1 -2 0 0x0 -1 SimSelectMRMOverride 27 -1 -2 0 0x0 -1 SimDeselectOverride 28 -1 -2 0 0x0 -1 SimSelectSRMOverride 29 -1 -2 0 0x0 -1 SimDoNothing 30 -1 -2 0 0x0 -1 AWACSDeclare 31 -1 -2 0 0x0 -1 SimDMSUp 0 -1 -3 0 0x0 -1 SimDoNothing 0 -1 -3 1 0x0 -1 SimDMSRight 0 -1 -3 2 0x0 -1 SimDoNothing 0 -1 -3 3 0x0 -1 SimDMSDown 0 -1 -3 4 0x0 -1 SimDoNothing 0 -1 -3 5 0x0 -1 SimDMSLeft 0 -1 -3 6 0x0 -1 SimDoNothing 0 -1 -3 7 0x0 -1 #================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -2 "========= HOTAS SHIFTED =========" SimWheelBrakes 256 -1 -2 0 0x0 -1 SimEmergencyJettison 257 -1 -2 0 0x0 123 ReloadTrackIR 258 -1 -2 0 0x0 -1 SimCATSwitch 259 -1 -2 0 0x0 115 AFResetTrim 260 -1 -2 0 0x0 -1 SimHotasPinkyShift 261 -1 -2 0 0x0 -1 SimCBEOSB_6L 262 -1 -2 0 0x0 126 SimCBEOSB_8L 263 -1 -2 0 0x0 126 SimLaserArmOn 264 -1 -2 0 0x0 310 SimLaserArmOff 265 -1 -2 0 0x0 310 SimAVTRSwitchOn 266 -1 -2 0 0x0 115 SimAVTRSwitchOff 267 -1 -2 0 0x0 115 SimFuelDoorOpen 268 -1 -2 0 0x0 311 SimFuelDoorClose 269 -1 -2 0 0x0 311 SimDoNothing 270 -1 -2 0 0x0 -1 SimRadarCursorZero 271 -1 -2 0 0x0 -1 SimHSDRangeStepDown 272 -1 -2 0 0x0 -1 SimHSDRangeStepUp 273 -1 -2 0 0x0 -1 SimRFQuiet 274 -1 -2 0 0x0 310 SimCMSUp 275 -1 -2 0 0x0 -1 SimCMSRight 276 -1 -2 0 0x0 -1 SimCMSDown 277 -1 -2 0 0x0 -1 SimCMSLeft 278 -1 -2 0 0x0 -1 SimTransmitCom1 279 -1 -2 0 0x0 -1 SimRadarBarScanChange 280 -1 -2 0 0x0 -1 SimTransmitCom2 281 -1 -2 0 0x0 -1 SimRadarAzimuthScanChange 282 -1 -2 0 0x0 -1 SimSelectMRMOverride 283 -1 -2 0 0x0 -1 SimDeselectOverride 284 -1 -2 0 0x0 -1 SimSelectSRMOverride 285 -1 -2 0 0x0 -1 SimDoNothing 286 -1 -2 0 0x0 -1 AWACSVectorToThreat 287 -1 -2 0 0x0 -1 AFElevatorTrimUp 2 -1 -3 0 0x0 -1 SimDoNothing 2 -1 -3 1 0x0 -1 AFAileronTrimRight 2 -1 -3 2 0x0 -1 SimDoNothing 2 -1 -3 3 0x0 -1 AFElevatorTrimDown 2 -1 -3 4 0x0 -1 SimDoNothing 2 -1 -3 5 0x0 -1 AFAileronTrimLeft 2 -1 -3 6 0x0 -1 SimDoNothing 2 -1 -3 7 0x0 -1
All this can be done in Notepad or any plain text editor to any *.key file.
In the above (combined BMS Full Keyboard + Flounder DX) the result would be:
################################################################### ### IF YOU SAVE THE KEYFILE IN THE BMS SETUP UI, YOU WILL LOOSE ### ### ALL COMMENTS AND THE ORDER OF THIS FILE! SO ALWAYS KEEP A ### ### BACKUP OF THIS FILE FOR FUTURE REFERENCE! ### ################################################################### SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "BMS - Full" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "1\. UI & 3RD PARTY SOFTWARE" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 1.01 UI FUNCTIONS ========" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "REM: Hardcoded (not changeable)" SimDoNothing -1 0 0x3B 0 0 1 -0 "UI: IVC Broadcast (Global Comms to 2D & 3D)" SimDoNothing -1 0 0x3C 0 0 1 -0 "UI: IVC Local (Comms only to 2D)" SimDoNothing -1 0 0x1 0 0 0 -0 "UI: Exit Sim - Leave Menu - Abort" SimDoNothing -1 0 0xB7 0 0 0 -0 "UI: Screenshot (See also section 6.06)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 1.02 3RD PARTY SOFTWARE ========" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "REM: This is just for reference. See manual." SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "REM: Assignments can't be changed here." SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "REM: Set keys in 3rd Party Softw. not here!" SimDoNothing -1 0 0x41 0 0 1 -0 "3RD: TrackIR Precision" SimDoNothing -1 0 0x42 0 0 1 -0 "3RD: TrackIR Profile" SimDoNothing -1 0 0x43 0 0 1 -0 "3RD: TrackIR Pause" SimDoNothing -1 0 0x58 0 0 1 -0 "3RD: TrackIR Recenter (See also 6.06)" SimDoNothing -1 0 0x46 0 0 1 -0 "3RD: Teamspeak PTT" SimDoNothing -1 0 0x37 0 0 1 -0 "3RD: Teamspeak Broadcast" SimDoNothing -1 0 0x37 1 0 1 -0 "3RD: Teamspeak Toggle Mike On/Off" SimDoNothing -1 0 0x37 2 0 1 -0 "3RD: Teamspeak Toggle Speaker On/Off" SimDoNothing -1 0 0x43 0 0 1 -0 "3RD: FRAPS Video Capture" SimDoNothing -1 0 0x44 0 0 1 -0 "3RD: FRAPS Screen Capture" SimDoNothing -1 0 0x57 0 0 1 -0 "3RD: FRAPS Benchmarking" SimDoNothing -1 0 0x58 0 0 1 -0 "3RD: FRAPS Overlay" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "2\. LEFT CONSOLE" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.01 TEST PANEL ========" SimOverHeat 312 0 0x3B 1 0 0 1 "TEST: FIRE & OHEAT DETECT Button - Hold" SimOBOGSBit 115 0 0x3C 1 0 0 1 "TEST: OXY QTY Switch - Hold" SimMalIndLights 312 0 0x3D 1 0 0 1 "TEST: MAL & IND LTS Button - Hold" SimMalIndLightsOFF 313 0 0XFFFFFFFF 0 0 0 1 "TEST: MAL & IND LTS Button - Release" SimProbeHeatMoveUp 115 0 0x3E 1 0 0 1 "TEST: PROBE HEAT Switch - Step Up" SimProbeHeatMoveDown 115 0 0x3F 1 0 0 1 "TEST: PROBE HEAT Switch - Step Down" SimProbeHeatOn 115 0 0XFFFFFFFF 0 0 0 1 "TEST: PROBE HEAT Switch - ON" SimProbeHeatOff 115 0 0XFFFFFFFF 0 0 0 1 "TEST: PROBE HEAT Switch - OFF" SimProbeHeatTest 115 0 0XFFFFFFFF 0 0 0 1 "TEST: PROBE HEAT Switch - TEST" SimEpuGenTest 115 0 0x40 1 0 0 1 "TEST: EPU/GEN Switch - Hold" SimFlcsPowerTest 310 0 0x41 1 0 0 1 "TEST: FLCS PWR TEST Switch - Hold" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.03 FLT CONTROL PANEL ========" SimDigitalBUP 311 0 0x3B 6 0 0 1 "FLT: DIGITAL Switch - Toggle" SimDigitalBUPBackup 311 0 0XFFFFFFFF 0 0 0 1 "FLT: DIGITAL Switch - BACKUP" SimDigitalBUPOff 311 0 0XFFFFFFFF 0 0 0 1 "FLT: DIGITAL Switch - OFF" SimAltFlaps 311 0 0x3C 6 0 0 1 "FLT: ALT FLAPS Switch - Toggle" SimAltFlapsExtend 311 0 0XFFFFFFFF 0 0 0 1 "FLT: ALT FLAPS Switch - EXTEND" SimAltFlapsNorm 311 0 0XFFFFFFFF 0 0 0 1 "FLT: ALT FLAPS Switch - NORM" SimManualFlyup 311 0 0x3D 6 0 0 1 "FLT: MANUAL TF FLYUP Switch - Toggle" SimManualFlyupDisable 311 0 0XFFFFFFFF 0 0 0 1 "FLT: MANUAL TF FLYUP Switch - DISABLE" SimManualFlyupEnable 311 0 0XFFFFFFFF 0 0 0 1 "FLT: MANUAL TF FLYUP Switch - ENABLE" SimLEFLockSwitch 311 0 0x3E 6 0 0 1 "FLT: LE FLAPS Switch - Toggle" SimLEFLock 311 0 0XFFFFFFFF 0 0 0 1 "FLT: LE FLAPS Switch - LOCK" SimLEFAuto 311 0 0XFFFFFFFF 0 0 0 1 "FLT: LE FLAPS Switch - AUTO" SimFLCSReset 115 0 0x3F 6 0 0 1 "FLT: FLCS Switch - Hold" SimFLTBIT 319 0 0x40 6 0 0 1 "FLT: BIT Switch - Push" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.04 MANUAL TRIM PANEL ========" SimTrimRollLeft 309 0 0x43 5 0 0 1 "TRIM: ROLL TRIM Wheel - L WING DN" SimTrimRollRight 309 0 0x44 5 0 0 1 "TRIM: ROLL TRIM Wheel - R WING DN" SimTrimAPDisc 310 0 0x58 5 0 0 1 "TRIM: TRIM/AP DISC Switch - Toggle" SimTrimAPDISC 310 0 0XFFFFFFFF 0 0 0 1 "TRIM: TRIM/AP DISC Switch - DISC" SimTrimAPNORM 310 0 0XFFFFFFFF 0 0 0 1 "TRIM: TRIM/AP DISC Switch - NORM" SimTrimYawLeft 116 0 0x43 6 0 0 1 "TRIM: YAW TRIM Knob - L" SimTrimYawRight 116 0 0x44 6 0 0 1 "TRIM: YAW TRIM Knob - R" SimTrimNoseUp 309 0 0x57 5 0 0 1 "TRIM: PITCH TRIM Wheel - NOSE UP" SimTrimNoseDown 309 0 0x57 6 0 0 1 "TRIM: PITCH TRIM Wheel - NOSE DN" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "REM: Trim-Reset (change @ CKPIT)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.05 FUEL PANEL ========" SimToggleMasterFuel 316 0 0x10 3 0 0 1 "FUEL: MASTER Switch - Toggle" SimMasterFuelOn 317 0 0XFFFFFFFF 0 0 0 1 "FUEL: MASTER Switch - ON" SimMasterFuelOff 316 0 0XFFFFFFFF 0 0 0 1 "FUEL: MASTER Switch - OFF" SimIncFuelPump 124 0 0x12 3 0 0 1 "FUEL: ENG FEED Knob - Step Up" SimDecFuelPump 124 0 0x11 3 0 0 1 "FUEL: ENG FEED Knob - Step Down" SimFuelPumpOff 124 0 0XFFFFFFFF 0 0 0 1 "FUEL: ENG FEED Knob - OFF" SimFuelPumpNorm 124 0 0XFFFFFFFF 0 0 0 1 "FUEL: ENG FEED Knob - NORM" SimFuelPumpAft 124 0 0XFFFFFFFF 0 0 0 1 "FUEL: ENG FEED Knob - AFT" SimFuelPumpFwd 124 0 0XFFFFFFFF 0 0 0 1 "FUEL: ENG FEED Knob - FWD" SimFuelDoorToggle 311 0 0x13 1 0 0 1 "FUEL: AIR REFUEL Switch - Toggle" SimFuelDoorOpen 311 0 0XFFFFFFFF 0 0 0 1 "FUEL: AIR REFUEL Switch - OPEN" SimFuelDoorClose 311 0 0XFFFFFFFF 0 0 0 1 "FUEL: AIR REFUEL Switch - CLOSE" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.06 AUX COMM PANEL ========" SimToggleAuxComMaster 125 0 0x3B 3 0 0 1 "AUX: CNI Knob Switch - Toggle" SimAuxComBackup 125 0 0XFFFFFFFF 0 0 0 1 "AUX: CNI Knob Switch - BACKUP" SimAuxComUFC 125 0 0XFFFFFFFF 0 0 0 1 "AUX: CNI Knob Switch - UFC" SimCycleLeftAuxComDigit 312 0 0x3C 3 0 0 1 "AUX: CHANNEL - Cycle Up Left Digit" SimDecLeftAuxComDigit 312 0 0XFFFFFFFF 0 0 0 1 "AUX: CHANNEL - Cycle Down Left Digit" SimCycleCenterAuxComDigit 312 0 0x3D 3 0 0 1 "AUX: CHANNEL - Cycle Up Center Digit" SimDecCenterAuxComDigit 312 0 0XFFFFFFFF 0 0 0 1 "AUX: CHANNEL - Cycle Down Center Dig." SimCycleRightAuxComDigit 312 0 0x3E 3 0 0 1 "AUX: CHANNEL - Cycle Up Right Digit" SimDecRightAuxComDigit 312 0 0XFFFFFFFF 0 0 0 1 "AUX: CHANNEL - Cycle Down Right Digit" SimCycleBandAuxComDigit 312 0 0x3F 3 0 0 1 "AUX: CHANNEL - Toggle Band X/Y" SimXBandAuxComDigit 312 0 0XFFFFFFFF 0 0 0 1 "AUX: CHANNEL - Toggle Band X" SimYBandAuxComDigit 312 0 0XFFFFFFFF 0 0 0 1 "AUX: CHANNEL - Toggle Band Y" SimToggleAuxComAATR 115 0 0x40 3 0 0 1 "AUX: STATION SELECTOR Switch - Toggle" SimTACANTR 115 0 0XFFFFFFFF 0 0 0 1 "AUX: STATION SELECTOR Switch - T/R" SimTACANAATR 115 0 0XFFFFFFFF 0 0 0 1 "AUX: STATION SELECTOR Switch - A/A TR" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.07 EXT LIGHTING PANEL ========" SimExtlAntiColl 115 0 0x16 3 0 0 1 "EXT: ANTI COLLISION Switch - Toggle" SimAntiCollOn 115 0 0XFFFFFFFF 0 0 0 1 "EXT: ANTI COLLISION Switch - ON" SimAntiCollOff 115 0 0XFFFFFFFF 0 0 0 1 "EXT: ANTI COLLISION Switch - OFF" SimExtlSteady 115 0 0x17 3 0 0 1 "EXT: POSITION Switch - Toggle" SimLightsFlash 115 0 0XFFFFFFFF 0 0 0 1 "EXT: POSITION Switch - FLASH" SimLightsSteady 115 0 0XFFFFFFFF 0 0 0 1 "EXT: POSITION Switch - STEADY" SimExtlWing 115 0 0x18 3 0 0 1 "EXT: WING/TAIL Switch - Toggle" SimWingLightBrt 115 0 0XFFFFFFFF 0 0 0 1 "EXT: WING/TAIL Switch - BRT" SimWingLightOff 115 0 0XFFFFFFFF 0 0 0 1 "EXT: WING/TAIL Switch - OFF" SimExtlPower 115 0 0x32 2 0 0 1 "EXT: MASTER Switch - Toggle" SimExtlMasterNorm 115 0 0XFFFFFFFF 0 0 0 1 "EXT: MASTER Switch - NORM" SimExtlMasterOff 115 0 0XFFFFFFFF 0 0 0 1 "EXT: MASTER Switch - OFF" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.08 EPU PANEL ========" SimEpuToggle 316 0 0x12 4 0 0 1 "EPU: EPU Switch - Cycle" SimEpuUp 316 0 0XFFFFFFFF 0 0 0 1 "EPU: EPU Switch - Step Up" SimEpuDown 316 0 0XFFFFFFFF 0 0 0 1 "EPU: EPU Switch - Step Down" SimEpuOn 316 0 0XFFFFFFFF 0 0 0 1 "EPU: EPU Switch - ON" SimEpuAuto 317 0 0XFFFFFFFF 0 0 0 1 "EPU: EPU Switch - NORM" SimEpuOff 316 0 0XFFFFFFFF 0 0 0 1 "EPU: EPU Switch - OFF" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.09 ELEC PANEL ========" SimMainPowerInc 310 0 0x11 5 0 0 1 "ELEC: MAIN PWR Switch - Step Up" SimMainPowerDec 310 0 0x10 5 0 0 1 "ELEC: MAIN PWR Switch - Step Down" SimMainPowerMain 310 0 0XFFFFFFFF 0 0 0 1 "ELEC: MAIN PWR Switch - MAIN" SimMainPowerBatt 310 0 0XFFFFFFFF 0 0 0 1 "ELEC: MAIN PWR Switch - BATT" SimMainPowerOff 310 0 0XFFFFFFFF 0 0 0 1 "ELEC: MAIN PWR Switch - OFF" SimElecReset 314 0 0x1C 2 0 0 1 "ELEC: CAUTION RESET Button - Push" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.10 AVTR PANEL ========" SimAVTRToggle 115 0 0x21 0 0 0 1 "AVTR: AVTR Switch - Toggle ON / OFF" SimAVTRSwitch 115 0 0x21 4 0 0 1 "AVTR: AVTR Switch - Cycle" SimAVTRSwitchUp 115 0 0XFFFFFFFF 0 0 0 1 "AVTR: AVTR Switch - Step Up" SimAVTRSwitchDown 115 0 0XFFFFFFFF 0 0 0 1 "AVTR: AVTR Switch - Step Down" SimAVTRSwitchOn 115 0 0XFFFFFFFF 0 0 0 1 "AVTR: AVTR Switch - ON" SimAVTRSwitchAuto 115 0 0XFFFFFFFF 0 0 0 1 "AVTR: AVTR Switch - AUTO" SimAVTRSwitchOff 115 0 0XFFFFFFFF 0 0 0 1 "AVTR: AVTR Switch - OFF" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.11 ECM PANEL ========" SimEcmPower 310 0 0x11 6 0 0 1 "ECM: OPR Switch - Toggle" SimEcmPowerOn 310 0 0XFFFFFFFF 0 0 0 1 "ECM: OPR Switch - OPR" SimEcmPowerOff 310 0 0XFFFFFFFF 0 0 0 1 "ECM: OPR Switch - OFF" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.12 ENG & JET START PANEL ========" SimJfsStart 319 0 0x24 1 0 0 1 "ENG: JFS Switch - Toggle! START 2 / OFF" SimJfsStart_Off 320 0 0XFFFFFFFF 0 0 0 1 "ENG: JFS Switch - OFF" SimJfsStart_Start2 320 0 0XFFFFFFFF 0 0 0 1 "ENG: JFS Switch - START 2" SimEngCont 316 0 0x15 6 0 0 1 "ENG: ENG CONT Switch - Toggle" SimEngContPri 317 0 0XFFFFFFFF 0 0 0 1 "ENG: ENG CONT Switch - PRI" SimEngContSec 316 0 0XFFFFFFFF 0 0 0 1 "ENG: ENG CONT Switch - SEC" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.13 AUDIO 2 PANEL ========" SimStepIntercomVolumeUp 116 0 0x1B 4 0 0 1 "AUDIO2: INTERCOM Knob - Volume Incr." SimStepIntercomVolumeDown 116 0 0x1A 4 0 0 1 "AUDIO2: INTERCOM Knob - Volume Decr." SimILS 116 0 0x15 5 0 0 1 "AUDIO2: ILS Knob - Toggle" SimILSOn 116 0 0XFFFFFFFF 0 0 0 1 "AUDIO2: ILS Knob - ON" SimILSOff 116 0 0XFFFFFFFF 0 0 0 1 "AUDIO2: ILS Knob - OFF" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.14 AUDIO 1 PANEL ========" SimStepComm1VolumeUp 116 0 0x1B 1 0 0 1 "AUDIO1: COMM 1 Knob - Volume Incr." SimStepComm1VolumeDown 116 0 0x1A 1 0 0 1 "AUDIO1: COMM 1 Knob - Volume Decr." SimComm1PowerOn 116 0 0XFFFFFFFF 0 0 0 1 "AUDIO1: COMM 1 Knob - Power On" SimComm1PowerOff 116 0 0XFFFFFFFF 0 0 0 1 "AUDIO1: COMM 1 Knob - Power Off" SimStepComm2VolumeUp 116 0 0x1B 2 0 0 1 "AUDIO1: COMM 2 Knob - Volume Incr." SimStepComm2VolumeDown 116 0 0x1A 2 0 0 1 "AUDIO1: COMM 2 Knob - Volume Decr." SimComm2PowerOn 116 0 0XFFFFFFFF 0 0 0 1 "AUDIO1: COMM 2 Knob - Power On" SimComm2PowerOff 116 0 0XFFFFFFFF 0 0 0 1 "AUDIO1: COMM 2 Knob - Power Off" SimStepMissileVolumeUp 116 3 0x1B 3 0 0 1 "AUDIO1: MSL Knob - Volume Incr." SimStepMissileVolumeDown 116 4 0x1A 3 0 0 1 "AUDIO1: MSL Knob - Volume Decr." SimAud1Com1 125 5 0x18 5 0 0 1 "AUDIO1: COMM 1 Mode Knob - Toggle" SimAud1Com1Sql 125 10 0XFFFFFFFF 0 0 0 1 "AUDIO1: COMM 1 Mode Knob - SQL" SimAud1Com1Gd 125 11 0XFFFFFFFF 0 0 0 1 "AUDIO1: COMM 1 Mode Knob - GD" SimAud1Com2 125 12 0x19 5 0 0 1 "AUDIO1: COMM 2 Mode Knob - Toggle" SimAud1Com2Sql 125 17 0XFFFFFFFF 0 0 0 1 "AUDIO1: COMM 2 Mode Knob - SQL" SimAud1Com2Gd 125 18 0XFFFFFFFF 0 0 0 1 "AUDIO1: COMM 2 Mode Knob - GD" SimStepThreatVolumeUp 116 21 0x1B 5 0 0 1 "AUDIO1: THREAT Knob - Volume Incr." SimStepThreatVolumeDown 116 22 0x1A 5 0 0 1 "AUDIO1: THREAT Knob - Volume Decr." #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.15 MPO PANEL ========" SimMPOToggle 115 0 0x18 0 0 0 1 "MPO: MANUAL PITCH Switch - Toggle" SimMPO 115 0 0x18 4 0 0 1 "MPO: MANUAL PITCH Switch - Hold" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.16 UHF PANEL ========" SimCycleRadioChannel 125 0 0x1E 3 0 0 1 "UHF: PRESET CHANNEL Knob - Cycle Up" SimDecRadioChannel 125 0 0XFFFFFFFF 0 0 0 1 "UHF: PRESET CHANNEL Knob - Cycle Down" SimBupUhfFreq1Inc 125 0 0x20 3 0 0 1 "UHF: A-3-2-T Rotary X__.___ - Step Up" SimBupUhfFreq1Dec 125 0 0x1F 3 0 0 1 "UHF: A-3-2-T Rotary X__.___ - Step Down" SimBupUhfFreq1_2 125 0 0XFFFFFFFF 0 0 0 1 "UHF: A-3-2-T Rotary 2__.___" SimBupUhfFreq1_3 125 0 0XFFFFFFFF 0 0 0 1 "UHF: A-3-2-T Rotary 3__.___" SimBupUhfFreq2Inc 125 0 0x21 3 0 0 1 "UHF: Manual Frequency _X_.___ - Cycle Up" SimBupUhfFreq2Dec 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency _X_.___ - Cycle Down" SimBupUhfFreq2_0 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency _0_.___" SimBupUhfFreq2_1 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency _1_.___" SimBupUhfFreq2_2 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency _2_.___" SimBupUhfFreq2_3 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency _3_.___" SimBupUhfFreq2_4 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency _4_.___" SimBupUhfFreq2_5 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency _5_.___" SimBupUhfFreq2_6 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency _6_.___" SimBupUhfFreq2_7 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency _7_.___" SimBupUhfFreq2_8 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency _8_.___" SimBupUhfFreq2_9 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency _9_.___" SimBupUhfFreq3Inc 125 0 0x22 3 0 0 1 "UHF: Manual Frequency __X.___ - Cycle Up" SimBupUhfFreq3Dec 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency __X.___ - Cycle Down" SimBupUhfFreq3_0 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency __0.___" SimBupUhfFreq3_1 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency __1.___" SimBupUhfFreq3_2 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency __2.___" SimBupUhfFreq3_3 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency __3.___" SimBupUhfFreq3_4 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency __4.___" SimBupUhfFreq3_5 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency __5.___" SimBupUhfFreq3_6 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency __6.___" SimBupUhfFreq3_7 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency __7.___" SimBupUhfFreq3_8 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency __8.___" SimBupUhfFreq3_9 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency __9.___" SimBupUhfFreq4Inc 125 0 0x23 3 0 0 1 "UHF: Manual Frequency ___.X__ - Cycle Up" SimBupUhfFreq4Dec 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___.X__ - Cycle Down" SimBupUhfFreq4_0 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___.0__" SimBupUhfFreq4_1 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___.1__" SimBupUhfFreq4_2 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___.2__" SimBupUhfFreq4_3 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___.3__" SimBupUhfFreq4_4 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___.4__" SimBupUhfFreq4_5 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___.5__" SimBupUhfFreq4_6 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___.6__" SimBupUhfFreq4_7 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___.7__" SimBupUhfFreq4_8 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___.8__" SimBupUhfFreq4_9 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___.9__" SimBupUhfFreq5Inc 125 0 0x24 3 0 0 1 "UHF: Manual Frequency ___._XX - Cycle Up" SimBupUhfFreq5Dec 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___._XX - Cycle Down" SimBupUhfFreq5_00 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___._00" SimBupUhfFreq5_25 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___._25" SimBupUhfFreq5_50 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___._50" SimBupUhfFreq5_75 125 0 0XFFFFFFFF 0 0 0 1 "UHF: Manual Frequency ___._75" SimBupUhfFuncInc 125 0 0x1F 5 0 0 1 "UHF: FUNCTION Knob - Step Up" SimBupUhfFuncDec 125 0 0x1E 5 0 0 1 "UHF: FUNCTION Knob - Step Down" SimBupUhfOff 125 0 0XFFFFFFFF 0 0 0 1 "UHF: FUNCTION Knob - OFF" SimBupUhfMain 125 0 0XFFFFFFFF 0 0 0 1 "UHF: FUNCTION Knob - MAIN" SimBupUhfBoth 125 0 0XFFFFFFFF 0 0 0 1 "UHF: FUNCTION Knob - BOTH" OTWBalanceIVCvsAIUp 116 0 0x1B 6 0 0 1 "UHF: VOL Knob - AI vs IVC Volume Incr" OTWBalanceIVCvsAIDown 116 0 0x1A 6 0 0 1 "UHF: VOL Knob - AI vs IVC Volume Decr" SimBupUhfModeInc 125 0 0x21 5 0 0 1 "UHF: MODE Knob - Step Up" SimBupUhfModeDec 125 0 0x20 5 0 0 1 "UHF: MODE Knob - Step Down" SimBupUhfManual 125 0 0XFFFFFFFF 0 0 0 1 "UHF: MODE Knob - MNL" SimBupUhfPreset 125 0 0XFFFFFFFF 0 0 0 1 "UHF: MODE Knob - PRESET" SimBupUhfGuard 125 0 0XFFFFFFFF 0 0 0 1 "UHF: MODE Knob - GRD" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.17 LEFT SIDE WALL ========" SimSlapSwitch 314 0 0x1F 0 0 0 1 "LEFT WALL: SLAP Switch (ECM-PGRM # 5)" AFCanopyToggle 322 0 0x2E 2 0 0 1 "LEFT WALL: CANOPY - Toggle Open/Close" AFCanopyOpen 322 0 0XFFFFFFFF 0 0 0 1 "LEFT WALL: CANOPY - Open" AFCanopyClose 322 0 0XFFFFFFFF 0 0 0 1 "LEFT WALL: CANOPY - Close" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.18 SEAT ========" SimSeatArm 315 0 0x12 1 0 0 1 "SEAT: Safety Lever - Toggle" SimSeatOn 315 0 0XFFFFFFFF 0 0 0 1 "SEAT: Safety Lever - Armed" SimSeatOff 315 0 0XFFFFFFFF 0 0 0 1 "SEAT: Safety Lever - Locked" SimEject 117 0 0x12 2 0 0 1 "SEAT: EJECT Handle - Hold For Eject" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.19 THROTTLE QUADRANT SYSTEM ========" SimTransmitCom1 -1 0 0xC7 0 0 0 1 "TQS: COMMS Switch Up - UHF" SimTransmitCom2 -1 0 0xCF 0 0 0 1 "TQS: COMMS Switch Down - VHF" SimCommsSwitchLeft -1 0 0xD3 0 0 0 1 "TQS: COMMS Switch Left - IFF OUT" SimCommsSwitchRight -1 0 0xD1 0 0 0 1 "TQS: COMMS Switch Right - IFF IN" SimRangeKnobUp -1 0 0x3E 4 0 0 1 "TQS: MAN RANGE Knob - Up" SimRangeKnobDown -1 0 0x3D 4 0 0 1 "TQS: MAN RANGE Knob - Down" SimToggleMissileCage -1 0 0x16 0 0 0 1 "TQS: MAN RANGE Knob - UNCAGE" SimSelectSRMOverride -1 0 0x20 0 0 0 1 "TQS: DOGFIGHT Switch - DF Override" SimSelectMRMOverride -1 0 0x32 0 0 0 1 "TQS: DOGFIGHT Switch - MRM Override" SimDeselectOverride -1 0 0x2E 0 0 0 1 "TQS: DOGFIGHT Switch - MRM/DF Cancel" AFBrakesToggle -1 0 0x30 0 0 0 1 "TQS: SPD BRAKE Switch - Toggle" AFBrakesOut -1 0 0x30 1 0 0 1 "TQS: SPD BRAKE Switch - Open" AFBrakesIn -1 0 0x30 2 0 0 1 "TQS: SPD BRAKE Switch - Close" SimCursorUp -1 0 0xC8 1 0 0 1 "TQS: RDR CURSOR - Up" SimCursorDown -1 0 0xD0 1 0 0 1 "TQS: RDR CURSOR - Down" SimCursorLeft -1 0 0xCB 1 0 0 1 "TQS: RDR CURSOR - Left" SimCursorRight -1 0 0xCD 1 0 0 1 "TQS: RDR CURSOR - Right" SimCursorEnable -1 0 0xD2 0 0 0 1 "TQS: RDR CURSOR - Cursor Enable" SimRadarCursorZero -1 0 0xC9 0 0 0 1 "TQS: RDR CURSOR - Cursor Zero" SimCursorStopMovement -1 0 0x15 1 0 0 1 "TQS: RDR CURSOR - Toggle Stop Movement" SimThrottleIdleDetent 314 0 0x17 4 0 0 1 "TQS: CUTOFF RELEASE - Idle Detent" SimRadarElevationUp -1 0 0x41 2 0 0 1 "TQS: ANT ELEV Knob - Tilt Up" SimRadarElevationCenter -1 0 0x40 2 0 0 1 "TQS: ANT ELEV Knob - Center" SimRadarElevationDown -1 0 0x3F 2 0 0 1 "TQS: ANT ELEV Knob - Tilt Down" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "3\. LEFT AUX CONSOLE" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 3.01 ALT GEAR CONTROL ========" AFAlternateGear 321 0 0x22 4 0 0 1 "ALT GEAR: Extend Gear Handle - Push" AFAlternateGearReset 314 0 0x22 1 0 0 1 "ALT GEAR: Reset Button - Push" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 3.02 TWA PANEL ========" SimRWRSetGroundPriority 318 0 0x53 4 0 0 1 "TWA: LOW Button - Toggle" SimRWRSetSearch 318 0 0x9C 4 0 0 1 "TWA: SEARCH Button - Toggle" SimRwrPower 318 0 0x52 4 0 0 1 "TWA: POWER Button - Toggle" SimRwrPowerOn 318 0 0XFFFFFFFF 0 0 0 1 "TWA: POWER Button - On" SimRwrPowerOff 318 0 0XFFFFFFFF 0 0 0 1 "TWA: POWER Button - Off" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 3.03 HMCS PANEL ========" SimHmsSymWheelUp 116 0 0x1B 0 0 0 1 "HMCS: HMSC Knob - Brightness Incr." SimHmsSymWheelDn 116 0 0x1A 0 0 0 1 "HMCS: HMSC Knob - Brightness Decr." SimHmsOn 116 0 0XFFFFFFFF 0 0 0 1 "HMCS: HMSC Knob - ON" SimHmsOff 116 0 0XFFFFFFFF 0 0 0 1 "HMCS: HMSC Knob - OFF" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 3.04 CMDS PANEL ========" SimEWSRWRPower 115 0 0x1E 6 0 0 1 "CMDS: RWR Switch - Toggle Power" SimEWSRWROn 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: RWR Switch - Power ON" SimEWSRWROff 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: RWR Switch - Power OFF" SimEWSJammerPower 115 0 0x1F 6 0 0 1 "CMDS: JMR Switch - Toggle Power" SimEWSJammerOn 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: JMR Switch - Power ON" SimEWSJammerOff 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: JMR Switch - Power OFF" SimEWSMwsPower 115 0 0x20 6 0 0 1 "CMDS: MWS Switch - Toggle Power" SimEWSMwsOn 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: MWS Switch - Power ON" SimEWSMwsOff 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: MWS Switch - Power OFF" SimEWSO1Power 115 0 0x21 6 0 0 1 "CMDS: O1 Switch - Toggle Power" SimEWSO1On 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: O1 Switch - Power ON" SimEWSO1Off 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: O1 Switch - Power OFF" SimEWSO2Power 115 0 0x22 6 0 0 1 "CMDS: O2 Switch - Toggle Power" SimEWSO2On 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: O2 Switch - Power ON" SimEWSO2Off 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: O2 Switch - Power OFF" SimEWSChaffPower 115 0 0x23 6 0 0 1 "CMDS: CH Switch - Toggle Power" SimEWSChaffOn 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: CH Switch - Power ON" SimEWSChaffOff 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: CH Switch - Power OFF" SimEWSFlarePower 115 0 0x24 6 0 0 1 "CMDS: FL Switch - Toggle Power" SimEWSFlareOn 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: FL Switch - Power ON" SimEWSFlareOff 115 0 0XFFFFFFFF 0 0 0 1 "CMDS: FL Switch - Power OFF" SimEWSDispPower 310 0 0x26 6 0 0 1 "CMDS: DISP Switch - Toggle (MLU EW Panel)" SimEWSDispOn 310 0 0XFFFFFFFF 0 0 0 1 "CMDS: DISP Switch - Power On (MLU EW Panel)" SimEWSDispOff 310 0 0XFFFFFFFF 0 0 0 1 "CMDS: DISP Switch - Power Off (MLU EW Panel)" SimEwsJett 311 0 0x25 6 0 0 1 "CMDS: JETT Switch - Toggle" SimEwsJettOn 311 0 0XFFFFFFFF 0 0 0 1 "CMDS: JETT Switch - ON" SimEwsJettOff 311 0 0XFFFFFFFF 0 0 0 1 "CMDS: JETT Switch - OFF" SimEWSProgInc 125 0 0x2D 2 0 0 1 "CMDS: PRGM Knob - Step Up" SimEWSProgDec 125 0 0x2C 2 0 0 1 "CMDS: PRGM Knob - Step Down" SimEWSProgOne 125 0 0XFFFFFFFF 0 0 0 1 "CMDS: PRGM Knob - 1" SimEWSProgTwo 125 0 0XFFFFFFFF 0 0 0 1 "CMDS: PRGM Knob - 2" SimEWSProgThree 125 0 0XFFFFFFFF 0 0 0 1 "CMDS: PRGM Knob - 3" SimEWSProgFour 125 0 0XFFFFFFFF 0 0 0 1 "CMDS: PRGM Knob - 4" SimEWSPGMInc 125 0 0x2D 4 0 0 1 "CMDS: MODE Knob - Step Up" SimEWSPGMDec 125 0 0x2C 4 0 0 1 "CMDS: MODE Knob - Step Down" SimEWSModeOff 125 0 0XFFFFFFFF 0 0 0 1 "CMDS: MODE Knob - OFF" SimEWSModeStby 125 0 0XFFFFFFFF 0 0 0 1 "CMDS: MODE Knob - STBY" SimEWSModeMan 125 0 0XFFFFFFFF 0 0 0 1 "CMDS: MODE Knob - MAN" SimEWSModeSemi 125 0 0XFFFFFFFF 0 0 0 1 "CMDS: MODE Knob - SEMI" SimEWSModeAuto 125 0 0XFFFFFFFF 0 0 0 1 "CMDS: MODE Knob - AUTO" SimEWSModeByp 125 0 0XFFFFFFFF 0 0 0 1 "CMDS: MODE Knob - BYP" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 3.05 GEAR PANEL ========" SimEmergencyJettison 123 0 0x24 2 0 0 1 "GEAR: EMER STORES JETTISON Button - Hold" SimHookToggle 310 0 0x25 2 0 0 1 "GEAR: HOOK Switch - Toggle" SimHookUp 310 0 0XFFFFFFFF 0 0 0 1 "GEAR: HOOK Switch - UP" SimHookDown 310 0 0XFFFFFFFF 0 0 0 1 "GEAR: HOOK Switch - DN" SimGndJettEnable 311 0 0x24 4 0 0 1 "GEAR: GND JETT Switch - Toggle" SimGndJettOn 311 0 0XFFFFFFFF 0 0 0 1 "GEAR: GND JETT Switch - ENABLE" SimGndJettOff 311 0 0XFFFFFFFF 0 0 0 1 "GEAR: GND JETT Switch - OFF" SimParkingBrakeToggle 319 0 0x19 4 0 0 1 "GEAR: PARKING BREAK Switch - Toggle" SimParkingBrakeOn 319 0 0XFFFFFFFF 0 0 0 1 "GEAR: PARKING BREAK Switch - ON" SimParkingBrakeOff 320 0 0XFFFFFFFF 0 0 0 1 "GEAR: PARKING BREAK Switch - OFF" AFGearToggle 119 0 0x22 0 0 0 1 "GEAR: LG Handle - Toggle" AFGearUp 119 0 0XFFFFFFFF 0 0 0 1 "GEAR: LG Handle - UP" AFGearDown 118 0 0XFFFFFFFF 0 0 0 1 "GEAR: LG Handle - DN" SimCATSwitch 115 0 0x2E 1 0 0 1 "GEAR: STORES CONFIG Switch - Toggle" SimCATI 115 0 0XFFFFFFFF 0 0 0 1 "GEAR: STORES CONFIG Switch - CAT I" SimCATIII 115 0 0XFFFFFFFF 0 0 0 1 "GEAR: STORES CONFIG Switch - CAT III" SimSilenceHorn 314 0 0x22 2 0 0 1 "GEAR: HORN SILENCER Button - Push" SimLandingLightToggle 115 0 0x26 1 0 0 1 "GEAR: LIGHTS Switch - Toggle" SimLandingLightOn 115 0 0XFFFFFFFF 0 0 0 1 "GEAR: LIGHTS Switch - LANDING" SimLandingLightOff 115 0 0XFFFFFFFF 0 0 0 1 "GEAR: LIGHTS Switch - OFF" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "4\. CENTER CONSOLE" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.01 MISC PANEL ========" SimRFSwitch 310 0 0x13 2 0 0 1 "MISC: RF Switch - Cycle" SimRFSwitchUp 310 0 0XFFFFFFFF 0 0 0 1 "MISC: RF Switch - Step Up" SimRFSwitchDown 310 0 0XFFFFFFFF 0 0 0 1 "MISC: RF Switch - Step Down" SimRFNorm 310 0 0XFFFFFFFF 0 0 0 1 "MISC: RF Switch - NORM" SimRFQuiet 310 0 0XFFFFFFFF 0 0 0 1 "MISC: RF Switch - QUIET" SimRFSilent 310 0 0XFFFFFFFF 0 0 0 1 "MISC: RF Switch - SILENT" SimLaserArmToggle 310 0 0x26 2 0 0 1 "MISC: LASER Switch - Toggle" SimLaserArmOn 310 0 0XFFFFFFFF 0 0 0 1 "MISC: LASER Switch - ARM" SimLaserArmOff 310 0 0XFFFFFFFF 0 0 0 1 "MISC: LASER Switch - OFF" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "MISC: ALT REL (Change Pickle @ Stick section)" SimStepMasterArm 311 0 0x32 1 0 0 1 "MISC: MASTER ARM Switch - Cycle" SimMasterArmUp 311 0 0XFFFFFFFF 0 0 0 1 "MISC: MASTER ARM Switch - Step Up" SimMasterArmDown 311 0 0XFFFFFFFF 0 0 0 1 "MISC: MASTER ARM Switch - Step Down" SimArmMasterArm 311 0 0XFFFFFFFF 0 0 0 1 "MISC: MASTER ARM Switch - ON" SimSafeMasterArm 311 0 0XFFFFFFFF 0 0 0 1 "MISC: MASTER ARM Switch - OFF" SimSimMasterArm 311 0 0XFFFFFFFF 0 0 0 1 "MISC: MASTER ARM Switch - SIM" SimToggleTFR 318 0 0x1E 2 0 0 1 "MISC: ADV MODE - Toggle TFR On / Off" SimLeftAPSwitch 115 0 0x1E 1 0 0 1 "MISC: ROLL Switch - Cycle" SimLeftAPInc 115 0 0XFFFFFFFF 0 0 0 1 "MISC: ROLL Switch - Step Up" SimLeftAPDec 115 0 0XFFFFFFFF 0 0 0 1 "MISC: ROLL Switch - Step Down" SimLeftAPUp 115 0 0XFFFFFFFF 0 0 0 1 "MISC: ROLL Switch - HDG SEL" SimLeftAPMid 115 0 0XFFFFFFFF 0 0 0 1 "MISC: ROLL Switch - ATT HOLD" SimLeftAPDown 115 0 0XFFFFFFFF 0 0 0 1 "MISC: ROLL Switch - STRG SEL" SimRightAPSwitch 319 0 0x1E 0 0 0 1 "MISC: PITCH Switch - Cycle (also Combat AP)" SimRightAPInc 319 0 0XFFFFFFFF 0 0 0 1 "MISC: PITCH Switch - Step Up" SimRightAPDec 319 0 0XFFFFFFFF 0 0 0 1 "MISC: PITCH Switch - Step Down" SimRightAPUp 319 0 0XFFFFFFFF 0 0 0 1 "MISC: PITCH Switch - ALT HOLD" SimRightAPMid 320 0 0XFFFFFFFF 0 0 0 1 "MISC: PITCH Switch - A/P OFF" SimRightAPDown 319 0 0XFFFFFFFF 0 0 0 1 "MISC: PITCH Switch - ATT HOLD" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.02 LEFT EYEBROW ========" ExtinguishMasterCaution 127 0 0x1C 0 0 0 1 "EYE: MASTER CAUTION Button - Push" SimICPFAck 122 0 0xE 0 0 0 1 "EYE: F ACK Button - Push" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.03 TWP ========" SimRWRHandoff 318 0 0x49 4 0 0 1 "TWP: HANDOFF - Push" SimRWRLaunch 318 0 0x4C 4 0 0 1 "TWP: MISSILE LAUNCH - Push" SimRWRSetPriority 318 0 0x4D 4 0 0 1 "TWP: PRIORITY MODE - Toggle" SimRWRSetUnknowns 318 0 0x4F 4 0 0 1 "TWP: UNKNOWN - Toggle" SimRWRSysTest 318 0 0x50 4 0 0 1 "TWP: SYS TEST - Push" SimRWRSetTargetSep 318 0 0x51 4 0 0 1 "TWP: TGT SEP - Push" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.04 RWR ========" SimRWRBrightnessUp 116 0 0x4E 4 0 0 1 "RWR: Brightness Knob - Increase" SimRWRBrightnessDown 116 0 0x4A 4 0 0 1 "RWR: Brightness Knob - Decrease" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.05 LEFT MFD ========" SimCBEOSB_1L 126 0 0x2 6 0 0 1 "LMFD: OSB-1 Button - Push" SimCBEOSB_2L 126 0 0x3 6 0 0 1 "LMFD: OSB-2 Button - Push" SimCBEOSB_3L 126 0 0x4 6 0 0 1 "LMFD: OSB-3 Button - Push" SimCBEOSB_4L 126 0 0x5 6 0 0 1 "LMFD: OSB-4 Button - Push" SimCBEOSB_5L 126 0 0x6 6 0 0 1 "LMFD: OSB-5 Button - Push" SimCBEOSB_6L 126 0 0x7 6 0 0 1 "LMFD: OSB-6 Button - Push" SimCBEOSB_7L 126 0 0x8 6 0 0 1 "LMFD: OSB-7 Button - Push" SimCBEOSB_8L 126 0 0x9 6 0 0 1 "LMFD: OSB-8 Button - Push" SimCBEOSB_9L 126 0 0xA 6 0 0 1 "LMFD: OSB-9 Button - Push" SimCBEOSB_10L 126 0 0xB 6 0 0 1 "LMFD: OSB-10 Button - Push" SimCBEOSB_11L 126 0 0x4F 6 0 0 1 "LMFD: OSB-11 Button - Push" SimCBEOSB_12L 126 0 0x50 6 0 0 1 "LMFD: OSB-12 Button - Push" SimCBEOSB_13L 126 0 0x51 6 0 0 1 "LMFD: OSB-13 Button - Push" SimCBEOSB_14L 126 0 0x4B 6 0 0 1 "LMFD: OSB-14 Button - Push" SimCBEOSB_15L 126 0 0x4C 6 0 0 1 "LMFD: OSB-15 Button - Push" SimCBEOSB_16L 126 0 0x4D 6 0 0 1 "LMFD: OSB-16 Button - Push" SimCBEOSB_17L 126 0 0x47 6 0 0 1 "LMFD: OSB-17 Button - Push" SimCBEOSB_18L 126 0 0x48 6 0 0 1 "LMFD: OSB-18 Button - Push" SimCBEOSB_19L 126 0 0x49 6 0 0 1 "LMFD: OSB-19 Button - Push" SimCBEOSB_20L 126 0 0x52 6 0 0 1 "LMFD: OSB-20 Button - Push" SimCBEOSB_BRTUP_L 126 0 0xD 6 0 0 1 "LMFD: BRT Button - Increase Brightness" SimCBEOSB_BRTDOWN_L 126 0 0xC 6 0 0 1 "LMFD: BRT Button - Decrease Brightness" SimRadarGainUp 126 0 0x29 5 0 0 1 "LMFD: GAIN Button - Increase Sensor Gain" SimRadarGainDown 126 0 0x29 6 0 0 1 "LMFD: GAIN Button - Decrease Sensor Gain" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.06 ICP ========" SimICPCom1 122 0 0x3B 0 0 0 1 "ICP: COM1 Button - Push" SimICPCom2 122 0 0x3C 0 0 0 1 "ICP: COM2 Button - Push" SimICPIFF 122 0 0x3D 0 0 0 1 "ICP: IFF Button - Push" SimICPLIST 122 0 0x3E 0 0 0 1 "ICP: LIST Button - Push" SimICPAA 122 0 0x3F 0 0 0 1 "ICP: A-A Button - Push" SimICPAG 122 0 0x40 0 0 0 1 "ICP: A-G Button - Push" SimICPNav 122 0 0xE 1 0 0 1 "ICP: NAV Mode (no such button In Pit)" SimICPTILS 122 0 0x4F 0 0 0 1 "ICP: 1-ILS Button - Push" SimICPALOW 122 0 0x50 0 0 0 1 "ICP: 2-ALOW Button - Push" SimICPTHREE 122 0 0x51 0 0 0 1 "ICP: 3 Button - Push" SimICPStpt 122 0 0x4B 0 0 0 1 "ICP: 4-STPT Button - Push" SimICPCrus 122 0 0x4C 0 0 0 1 "ICP: 5-CRUS Button - Push" SimICPSIX 122 0 0x4D 0 0 0 1 "ICP: 6-TIME Button - Push" SimICPMark 122 0 0x47 0 0 0 1 "ICP: 7-MARK Button - Push" SimICPEIGHT 122 0 0x48 0 0 0 1 "ICP: 8-FIX Button - Push" SimICPNINE 122 0 0x49 0 0 0 1 "ICP: 9-A-CAL Button - Push" SimICPZERO 122 0 0x52 0 0 0 1 "ICP: 0-M-SEL Button - Push" SimICPCLEAR 122 0 0x53 0 0 0 1 "ICP: RCL Button - Push" SimICPEnter 122 0 0x9C 0 0 0 1 "ICP: ENTER Button - Push" SimICPNext 126 0 0x4E 0 0 0 1 "ICP: NEXT Button - Push" SimICPPrevious 126 0 0x4A 0 0 0 1 "ICP: PREVIOUS Button - Push" SimICPDEDUP 120 0 0xC8 0 0 0 1 "ICP: DCS UP - Push" SimICPDEDDOWN 120 0 0xD0 0 0 0 1 "ICP: DCS DOWN - Push" SimICPDEDSEQ 120 0 0xCD 0 0 0 1 "ICP: DCS SEQ (Right) - Push" SimICPResetDED 120 0 0xCB 0 0 0 1 "ICP: DCS RTN (Left) - Push" SimDriftCO 121 0 0xB5 0 0 0 1 "ICP: DRIFT C/O Switch - Tog. ON/NORM!" SimDriftCOOn 121 0 0XFFFFFFFF 0 0 0 1 "ICP: DRIFT C/O Switch - ON" SimDriftCOOff 121 0 0XFFFFFFFF 0 0 0 1 "ICP: DRIFT C/O Switch - NORM" SimWarnReset 115 0 0x1C 1 0 0 1 "ICP: DRIFT C/O Switch - WARN RESET" SimSetWX 122 0 0xB5 1 0 0 1 "ICP: FLIR - WX Mode" SimFlirLevelUp 122 0 0xC9 1 0 0 1 "ICP: FLIR Rocker - Level Up" SimFlirLevelDown 122 0 0xD2 1 0 0 1 "ICP: FLIR Rocker - Level Down" SimSymWheelUp 116 0 0x4E 3 0 0 1 "ICP: SYM Wheel - Increase HUD Brightness" SimSymWheelDn 116 0 0x4A 3 0 0 1 "ICP: SYM Wheel - Decrease HUD Brightness" SimHUDPower 116 0 0x9C 3 0 0 1 "ICP: SYM Wheel - HUD Power - Toggle" SimHUDOn 116 0 0XFFFFFFFF 0 0 0 1 "ICP: SYM Wheel - HUD Power - On" SimHUDOff 116 0 0XFFFFFFFF 0 0 0 1 "ICP: SYM Wheel - HUD Power - OFF" SimBrtWheelUp 116 0 0x4E 5 0 0 1 "ICP: BRT Wheel - Increase FLIR Intensity" SimBrtWheelDn 116 0 0x4A 5 0 0 1 "ICP: BRT Wheel - Decrease FLIR Intensity" SimRetUp 116 0 0x4E 6 0 0 1 "ICP: DEPR RET Wheel - Step Up" SimRetDn 116 0 0x4A 6 0 0 1 "ICP: DEPR RET Wheel - Step Down" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.07 MAIN INSTRUMENT ========" SimHsiHeadingInc 116 0 0x28 0 0 0 1 "MAIN: HSI HDG Knob - Increase (5°)" SimHsiHeadingDec 116 0 0x27 0 0 0 1 "MAIN: HSI HDG Knob - Decrease (5°)" SimHsiHdgIncBy1 116 0 0x28 1 0 0 1 "MAIN: HSI HDG Knob - Increase (1°)" SimHsiHdgDecBy1 116 0 0x27 1 0 0 1 "MAIN: HSI HDG Knob - Decrease (1°)" SimHsiCourseInc 116 0 0x28 2 0 0 1 "MAIN: HSI CRS Knob - Increase (5°)" SimHsiCourseDec 116 0 0x27 2 0 0 1 "MAIN: HSI CRS Knob - Decrease (5°)" SimHsiCrsIncBy1 116 0 0x28 4 0 0 1 "MAIN: HSI CRS Knob - Increase (1°)" SimHsiCrsDecBy1 116 0 0x27 4 0 0 1 "MAIN: HSI CRS Knob - Decrease (1°)" SimAltPressInc 116 0 0x28 3 0 0 1 "MAIN: Altimeter Pressure Knob - Incr. (5°)" SimAltPressDec 116 0 0x27 3 0 0 1 "MAIN: Altimeter Pressure Knob - Decr. (5°)" SimAltPressIncBy1 116 0 0x28 5 0 0 1 "MAIN: Altimeter Pressure Knob - Incr. (1°)" SimAltPressDecBy1 116 0 0x27 5 0 0 1 "MAIN: Altimeter Pressure Knob - Decr. (1°)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.08 INSTR MODE PANEL ========" SimStepHSIMode 125 0 0x17 0 0 0 1 "INSTR: MODE Knob - Cycle" SimHSIModeInc 125 0 0XFFFFFFFF 0 0 0 1 "INSTR: MODE Knob - Step Up" SimHSIModeDec 125 0 0XFFFFFFFF 0 0 0 1 "INSTR: MODE Knob - Step Down" SimHSIIlsTcn 125 0 0XFFFFFFFF 0 0 0 1 "INSTR: MODE Knob - ILS/TCN" SimHSITcn 125 0 0XFFFFFFFF 0 0 0 1 "INSTR: MODE Knob - TCN" SimHSINav 125 0 0XFFFFFFFF 0 0 0 1 "INSTR: MODE Knob - NAV" SimHSIIlsNav 125 0 0XFFFFFFFF 0 0 0 1 "INSTR: MODE Knob - ILS/NAV" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.09 FUEL QTY PANEL ========" SimIncFuelSwitch 125 0 0x10 1 0 0 1 "QTY: FUEL QTY SEL Knob - Step Up" SimDecFuelSwitch 125 0 0x10 2 0 0 1 "QTY: FUEL QTY SEL Knob - Step Down" SimFuelSwitchTest 125 0 0XFFFFFFFF 0 0 0 1 "QTY: FUEL QTY SEL Knob - TEST" SimFuelSwitchNorm 125 0 0XFFFFFFFF 0 0 0 1 "QTY: FUEL QTY SEL Knob - NORM" SimFuelSwitchResv 125 0 0XFFFFFFFF 0 0 0 1 "QTY: FUEL QTY SEL Knob - RSVR" SimFuelSwitchWingInt 125 0 0XFFFFFFFF 0 0 0 1 "QTY: FUEL QTY SEL Knob - INT WING" SimFuelSwitchWingExt 125 0 0XFFFFFFFF 0 0 0 1 "QTY: FUEL QTY SEL Knob - EXT WING" SimFuelSwitchCenterExt 125 0 0XFFFFFFFF 0 0 0 1 "QTY: FUEL QTY SEL Knob - EXT CTR" SimExtFuelTrans 311 0 0x21 1 0 0 1 "QTY: EXT FUEL TRANS Switch - Toggle" SimFuelTransNorm 311 0 0XFFFFFFFF 0 0 0 1 "QTY: EXT FUEL TRANS Switch - NORM" SimFuelTransWing 311 0 0XFFFFFFFF 0 0 0 1 "QTY: EXT FUEL TRANS Switch - WING FIRST" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.10 RIGHT MFD ========" SimCBEOSB_1R 126 0 0x2 5 0 0 1 "RMFD: OSB-1 Button - Push" SimCBEOSB_2R 126 0 0x3 5 0 0 1 "RMFD: OSB-2 Button - Push" SimCBEOSB_3R 126 0 0x4 5 0 0 1 "RMFD: OSB-3 Button - Push" SimCBEOSB_4R 126 0 0x5 5 0 0 1 "RMFD: OSB-4 Button - Push" SimCBEOSB_5R 126 0 0x6 5 0 0 1 "RMFD: OSB-5 Button - Push" SimCBEOSB_6R 126 0 0x7 5 0 0 1 "RMFD: OSB-6 Button - Push" SimCBEOSB_7R 126 0 0x8 5 0 0 1 "RMFD: OSB-7 Button - Push" SimCBEOSB_8R 126 0 0x9 5 0 0 1 "RMFD: OSB-8 Button - Push" SimCBEOSB_9R 126 0 0xA 5 0 0 1 "RMFD: OSB-9 Button - Push" SimCBEOSB_10R 126 0 0xB 5 0 0 1 "RMFD: OSB-10 Button - Push" SimCBEOSB_11R 126 0 0x4F 5 0 0 1 "RMFD: OSB-11 Button - Push" SimCBEOSB_12R 126 0 0x50 5 0 0 1 "RMFD: OSB-12 Button - Push" SimCBEOSB_13R 126 0 0x51 5 0 0 1 "RMFD: OSB-13 Button - Push" SimCBEOSB_14R 126 0 0x4B 5 0 0 1 "RMFD: OSB-14 Button - Push" SimCBEOSB_15R 126 0 0x4C 5 0 0 1 "RMFD: OSB-15 Button - Push" SimCBEOSB_16R 126 0 0x4D 5 0 0 1 "RMFD: OSB-16 Button - Push" SimCBEOSB_17R 126 0 0x47 5 0 0 1 "RMFD: OSB-17 Button - Push" SimCBEOSB_18R 126 0 0x48 5 0 0 1 "RMFD: OSB-18 Button - Push" SimCBEOSB_19R 126 0 0x49 5 0 0 1 "RMFD: OSB-19 Button - Push" SimCBEOSB_20R 126 0 0x52 5 0 0 1 "RMFD: OSB-20 Button - Push" SimCBEOSB_BRTUP_R 126 0 0xD 5 0 0 1 "RMFD: BRT Button - Increase Brightness" SimCBEOSB_BRTDOWN_R 126 0 0xC 5 0 0 1 "RMFD: BRT Button - Decrease Brightness" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "RMFD: GAIN Button - Increase (change @ LMFD)" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "RMFD: GAIN Button - Decrease (change @ LMFD)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "5\. RIGHT CONSOLE" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 5.01 SNSR PWR PANEL ========" SimLeftHptPower 311 0 0x2D 3 0 0 1 "SNSR: LEFT HDPT Switch - Toggle" SimLeftHptOn 311 0 0XFFFFFFFF 0 0 0 1 "SNSR: LEFT HDPT Switch - ON" SimLeftHptOff 311 0 0XFFFFFFFF 0 0 0 1 "SNSR: LEFT HDPT Switch - OFF" SimRightHptPower 311 0 0x2C 3 0 0 1 "SNSR: RIGHT HDPT Switch - Toggle" SimRightHptOn 311 0 0XFFFFFFFF 0 0 0 1 "SNSR: RIGHT HDPT Switch - ON" SimRightHptOff 311 0 0XFFFFFFFF 0 0 0 1 "SNSR: RIGHT HDPT Switch - OFF" SimFCRPower 311 0 0x2E 3 0 0 1 "SNSR: FCR Switch - Toggle" SimFCROn 311 0 0XFFFFFFFF 0 0 0 1 "SNSR: FCR Switch - ON" SimFCROff 311 0 0XFFFFFFFF 0 0 0 1 "SNSR: FCR Switch - OFF" SimRALTUp 311 0 0x30 3 0 0 1 "SNSR: RDR ALT Switch - Step Up" SimRALTDown 311 0 0x2F 3 0 0 1 "SNSR: RDR ALT Switch - Step Down" SimRALTON 311 0 0XFFFFFFFF 0 0 0 1 "SNSR: RDR ALT Switch - ON" SimRALTSTDBY 311 0 0XFFFFFFFF 0 0 0 1 "SNSR: RDR ALT Switch - STDBY" SimRALTOFF 311 0 0XFFFFFFFF 0 0 0 1 "SNSR: RDR ALT Switch - OFF" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 5.02 HUD PANEL ========" SimHUDScales 115 0 0x23 0 0 0 1 "HUD: Scales Switch - Cycle" SimHUDScalesUp 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Scales Switch - Step Up" SimHUDScalesDown 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Scales Switch - Step Down" SimScalesVVVAH 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Scales Switch - VV/VAH" SimScalesVAH 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Scales Switch - VAH" SimScalesOff 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Scales Switch - OFF" SimHUDFPM 115 0 0x32 3 0 0 1 "HUD: FPM Switch - Cycle" SimPitchLadderUp 115 0 0XFFFFFFFF 0 0 0 1 "HUD: FPM Switch - Step Up" SimPitchLadderDown 115 0 0XFFFFFFFF 0 0 0 1 "HUD: FPM Switch - Step Down" SimPitchLadderATTFPM 115 0 0XFFFFFFFF 0 0 0 1 "HUD: FPM Switch - ATT/FPM" SimPitchLadderFPM 115 0 0XFFFFFFFF 0 0 0 1 "HUD: FPM Switch - FPM" SimPitchLadderOff 115 0 0XFFFFFFFF 0 0 0 1 "HUD: FPM Switch - OFF" SimHUDDED 115 0 0x23 1 0 0 1 "HUD: DED Data Switch - Cycle" SimHUDDEDUp 115 0 0XFFFFFFFF 0 0 0 1 "HUD: DED Data Switch - Step Up" SimHUDDEDDown 115 0 0XFFFFFFFF 0 0 0 1 "HUD: DED Data Switch - Step Dn" SimHUDDEDDED 115 0 0XFFFFFFFF 0 0 0 1 "HUD: DED Data Switch - DED" SimHUDDEDPFL 115 0 0XFFFFFFFF 0 0 0 1 "HUD: DED Data Switch - PFL" SimHUDDEDOff 115 0 0XFFFFFFFF 0 0 0 1 "HUD: DED Data Switch - OFF" SimReticleSwitch 310 0 0x33 3 0 0 1 "HUD: DEPR RET Switch - Cycle" SimReticleSwitchUp 310 0 0XFFFFFFFF 0 0 0 1 "HUD: DEPR RET Switch - Step Up" SimReticleSwitchDown 310 0 0XFFFFFFFF 0 0 0 1 "HUD: DEPR RET Switch - Step Down" SimReticleStby 310 0 0XFFFFFFFF 0 0 0 1 "HUD: DEPR RET Switch - STBY" SimReticlePri 310 0 0XFFFFFFFF 0 0 0 1 "HUD: DEPR RET Switch - PRI" SimReticleOff 310 0 0XFFFFFFFF 0 0 0 1 "HUD: DEPR RET Switch - OFF" SimHUDVelocity 115 0 0x23 2 0 0 1 "HUD: Velocity Switch - Cycle" SimHUDVelocityUp 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Velocity Switch - Step Up" SimHUDVelocityDown 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Velocity Switch - Step Dn" SimHUDVelocityCAS 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Velocity Switch - CAS" SimHUDVelocityTAS 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Velocity Switch - TAS" SimHUDVelocityGND 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Velocity Switch - GND SPD" SimHUDRadar 115 0 0x34 3 0 0 1 "HUD: Altitude Switch - Cycle" SimHUDAltUp 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Altitude Switch - Step Up" SimHUDAltDown 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Altitude Switch - Step Dn" SimHUDAltRadar 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Altitude Switch - RADAR" SimHUDAltBaro 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Altitude Switch - BARO" SimHUDAltAuto 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Altitude Switch - AUTO" SimHUDBrightness 115 0 0x35 3 0 0 1 "HUD: Brightness Switch - Cycle" SimHUDBrightnessUp 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Brightness Switch - Step Up" SimHUDBrightnessDown 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Brightness Switch - Step Dn" SimHUDBrtDay 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Brightness Switch - DAY" SimHUDBrtAuto 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Brightness Switch - AUTO BRT" SimHUDBrtNight 115 0 0XFFFFFFFF 0 0 0 1 "HUD: Brightness Switch - NIG" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 5.04 LIGHTING PANEL ========" SimInstrumentLight 116 0 0x2D 5 0 0 1 "LIGHT: INST PNL Knob (Primary) - Cycle" SimInstrumentLightCW 116 0 0XFFFFFFFF 0 0 0 1 "LIGHT: INST PNL Knob (Primary) - Step Up" SimInstrumentLightCCW 116 0 0XFFFFFFFF 0 0 0 1 "LIGHT: INST PNL Knob (Primary) - Step Down" SimDedBrightness 116 0 0x2C 5 0 0 1 "LIGHT: DED Knob (Primary) - Cycle" SimDedBrightnessCW 116 0 0XFFFFFFFF 0 0 0 1 "LIGHT: DED Knob (Primary) - Step Up" SimDedBrightnessCCW 116 0 0XFFFFFFFF 0 0 0 1 "LIGHT: DED Knob (Primary) - Step Down" SimInteriorLight 116 0 0x2E 5 0 0 1 "LIGHT: CONSOLES Knob (Flood) - Cycle" SimInteriorLightCW 116 0 0XFFFFFFFF 0 0 0 1 "LIGHT: CONSOLES Knob (Flood) - Step Up" SimInteriorLightCCW 116 0 0XFFFFFFFF 0 0 0 1 "LIGHT: CONSOLES Knob (Flood) - Step Down" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 5.05 AIR COND PANEL ========" SimIncAirSource 124 0 0x34 5 0 0 1 "AIR: AIR SOURCE Knob - Step Up" SimDecAirSource 124 0 0x33 5 0 0 1 "AIR: AIR SOURCE Knob - Step Down" SimAirSourceOff 124 0 0XFFFFFFFF 0 0 0 1 "AIR: AIR SOURCE Knob - OFF" SimAirSourceNorm 124 0 0XFFFFFFFF 0 0 0 1 "AIR: AIR SOURCE Knob - NORM" SimAirSourceDump 124 0 0XFFFFFFFF 0 0 0 1 "AIR: AIR SOURCE Knob - DUMP" SimAirSourceRam 124 0 0XFFFFFFFF 0 0 0 1 "AIR: AIR SOURCE Knob - RAM" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 5.06 ZEROIZE PANEL ========" SimInhibitVMS 115 0 0x2F 2 0 0 1 "ZERO: VMS Switch - Toggle" SimVMSOn 115 0 0XFFFFFFFF 0 0 0 1 "ZERO: VMS Switch - ON" SimVMSOff 115 0 0XFFFFFFFF 0 0 0 1 "ZERO: VMS Switch - INHIBIT" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 5.09 AVIONIC POWER PANEL ========" SimINSInc 125 0 0x2D 6 0 0 1 "AVIONICS: INS Knob - Step Up" SimINSDec 125 0 0x2C 6 0 0 1 "AVIONICS: INS Knob - Step Down" SimINSOff 125 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: INS Knob - OFF" SimINSNorm 125 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: INS Knob - NORM" SimINSNav 125 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: INS Knob - NAV" SimINSInFlt 125 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: INS Knob - IN FLT ALIGN" SimFCCPower 310 0 0x2E 6 0 0 1 "AVIONICS: FCC Switch - Toggle" SimFCCOn 310 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: FCC Switch - ON" SimFCCOff 310 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: FCC Switch - OFF" SimSMSPower 310 0 0x2F 6 0 0 1 "AVIONICS: SMS Switch - Toggle" SimSMSOn 310 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: SMS Switch - ON" SimSMSOff 310 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: SMS Switch - OFF" SimMFDPower 311 0 0x30 6 0 0 1 "AVIONICS: MFD Switch - Toggle" SimMFDOn 311 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: MFD Switch - ON" SimMFDOff 311 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: MFD Switch - OFF" SimUFCPower 310 0 0x31 6 0 0 1 "AVIONICS: UFC Switch - Toggle" SimUFCOn 310 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: UFC Switch - ON" SimUFCOff 310 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: UFC Switch - OFF" SimGPSPower 310 0 0x32 6 0 0 1 "AVIONICS: GPS Switch - Toggle" SimGPSOn 310 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: GPS Switch - ON" SimGPSOff 310 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: GPS Switch - OFF" SimDLPower 310 0 0x33 6 0 0 1 "AVIONICS: DL Switch - Toggle" SimDLOn 310 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: DL Switch - ON" SimDLOff 310 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: DL Switch - OFF" SimMAPPower 310 0 0x34 6 0 0 1 "AVIONICS: MAP Switch - Toggle" SimMAPOn 310 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: MAP Switch - ON" SimMAPOff 310 0 0XFFFFFFFF 0 0 0 1 "AVIONICS: MAP Switch - OFF" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 5.10 OXYGEN PANEL ========" SimOxySupplyToggle 129 0 0x18 1 0 0 1 "OXY: Setting 2 - Toggle (Pilot breathing)" SimOxySupplyOn 129 0 0XFFFFFFFF 0 0 0 1 "OXY: Setting 2 - ON (Pilot breathing)" SimOxySupplyOff 129 0 0XFFFFFFFF 0 0 0 1 "OXY: Setting 2 - OFF (Pilot breathing)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 5.11 FLIGHT STICK ========" SimTMSUp -1 0 0xC7 1 0 0 1 "STICK: TMS Up" SimTMSDown -1 0 0xCF 1 0 0 1 "STICK: TMS Down" SimTMSLeft -1 0 0xD3 1 0 0 1 "STICK: TMS Left" SimTMSRight -1 0 0xD1 1 0 0 1 "STICK: TMS Right" SimDMSUp -1 0 0xC7 2 0 0 1 "STICK: DMS Up" SimDMSDown -1 0 0xCF 2 0 0 1 "STICK: DMS Down" SimDMSLeft -1 0 0xD3 2 0 0 1 "STICK: DMS Left" SimDMSRight -1 0 0xD1 2 0 0 1 "STICK: DMS Right" SimCMSUp -1 0 0xC7 4 0 0 1 "STICK: CMS Up" SimCMSDown -1 0 0xCF 4 0 0 1 "STICK: CMS Down" SimCMSLeft -1 0 0xD3 4 0 0 1 "STICK: CMS Left" SimCMSRight -1 0 0xD1 4 0 0 1 "STICK: CMS Right" AFElevatorTrimUp -1 0 0xC8 2 0 0 1 "STICK: TRIM Up - Nose Down" AFElevatorTrimDown -1 0 0xD0 2 0 0 1 "STICK: TRIM Down - Nose Up" AFAileronTrimLeft -1 0 0xCB 2 0 0 1 "STICK: TRIM Left - Roll Left" AFAileronTrimRight -1 0 0xCD 2 0 0 1 "STICK: TRIM Right - Roll Right" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "REM: Trim-Reset (change @ CKPIT)" SimTriggerFirstDetent -1 0 0x35 2 0 0 1 "STICK: FIRST TRIGGER DETENT" SimTriggerSecondDetent -1 0 0x35 4 0 0 1 "STICK: SECOND TRIGGER DETENT" SimPickle -1 0 0x39 0 0 0 1 "STICK: WEAPON RELEASE (Pickle)" SimMissileStep -1 0 0x35 1 0 0 1 "STICK: NWS A/R DISC MSL STEP SWITCH" SimPinkySwitch -1 0 0x2F 0 0 0 1 "STICK: PINKY SWITCH" SimHotasPinkyShift -1 0 0XFFFFFFFF 0 0 0 1 "STICK: PINKY SWITCH (DX SHIFT)" SimAPOverride -1 0 0x1E 4 0 0 1 "STICK: PADDLE SWITCH" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "6\. MISCELLANEOUS" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 6.01 OTHER COCKPIT CALLBACKS ========" ToggleNVGMode -1 0 0x31 0 0 0 1 "CKPIT: Nightvision - Toggle" ToggleSmoke -1 0 0x1F 2 0 0 1 "CKPIT: Smoke - Toggle" OTWStepHudColor -1 0 0x23 4 0 0 1 "CKPIT: HUD Color - Cycle" SimWheelBrakes -1 0 0x25 0 0 0 1 "CKPIT: Wheel Brakes - Hold" SimSpotLight -1 0 0x1F 1 0 0 1 "CKPIT: Spotlight - Toggle" ToggleClickablePitMode -1 0 0x3 4 0 0 1 "CKPIT: Mouselook / Clickable Pit - Toggle " OTWMouseButtonsIn3dToggle -1 0 0x4 4 0 0 1 "CKPIT: Toggle Mouse Btns in 3D" OTWMouseButtonsIn3dEnable -1 0 0XFFFFFFFF 0 0 0 1 "CKPIT: Enable Mouse Btns in 3D" OTWMouseButtonsIn3dDisable -1 0 0XFFFFFFFF 0 0 0 1 "CKPIT: Disable Mouse Btns in 3D" AFDragChute -1 0 0x20 1 0 0 1 "CKPIT: Drag Chute Deploy" AFResetTrim -1 0 0x1C 4 0 0 1 "CKPIT: Trim-Reset (Change here)" SimFuelDump -1 0 0x20 4 0 0 1 "CKPIT: Dump Fuel" SimDropChaff -1 0 0x33 2 0 0 1 "CKPIT: Drop Chaff (non EWS AC)" SimDropFlare -1 0 0x34 2 0 0 1 "CKPIT: Drop Flare (non EWS AC)" AFTriggerCatapult -1 0 0x25 1 0 0 1 "CKPIT: NAVOPS - Release Catapult Trigger" AFFullFlap -1 0 0x44 2 0 0 1 "CKPIT: FLAPS - Set To Full" AFNoFlap -1 0 0x43 2 0 0 1 "CKPIT: FLAPS - Set To Null" AFIncFlap -1 0 0x58 2 0 0 1 "CKPIT: FLAPS - Increase" AFDecFlap -1 0 0x57 2 0 0 1 "CKPIT: FLAPS - Decrease" AFFullLEF -1 0 0x44 4 0 0 1 "CKPIT: LEFS - Set To Full" AFNoLEF -1 0 0x43 4 0 0 1 "CKPIT: LEFS - Set To Null" AFIncLEF -1 0 0x58 4 0 0 1 "CKPIT: LEFS - Increase" AFDecLEF -1 0 0x57 4 0 0 1 "CKPIT: LEFS - Decrease" SimTEFCMDInc 129 0 0x58 1 0 0 1 "CKPIT: F-18 FLAP Switch - Step Up" SimTEFCMDDec 129 0 0x57 1 0 0 1 "CKPIT: F-18 FLAP Switch - Step Down" SimTEFCMDAuto 129 0 0XFFFFFFFF 0 0 0 1 "CKPIT: F-18 FLAP Switch - AUTO" SimTEFCMDHalf 129 0 0XFFFFFFFF 0 0 0 1 "CKPIT: F-18 FLAP Switch - HALF" SimTEFCMDFull 129 0 0XFFFFFFFF 0 0 0 1 "CKPIT: F-18 FLAP Switch - FULL" AFWingFoldToggle 129 0 0x11 1 0 0 1 "CKPIT: Wing Fold - Toggle" AFWingFoldUp 129 0 0XFFFFFFFF 0 0 0 1 "CKPIT: Wing Fold - Up" AFWingFoldDown 129 0 0XFFFFFFFF 0 0 0 1 "CKPIT: Wing Fold - Down" SimStepFormationLightsUp -1 0 0x2D 1 0 0 1 "CKPIT: Formation Lights - Step Up" SimStepFormationLightsDown -1 0 0x2C 1 0 0 1 "CKPIT: Formation Lights - Step Down" LoadCockpitDefaults -1 0 0x26 0 0x2E 4 1 "CKPIT: Cockpit Defaults - Load" SaveCockpitDefaults -1 0 0x1F 0 0x2E 4 1 "CKPIT: Cockpit Defaults - Save" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 6.02 SHORTCUTS ========" IncreaseAlow -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Increase ALOW" DecreaseAlow -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Decrease ALOW" SimNextWaypoint -1 0 0x2D 0 0 0 1 "SHORT: Next Waypoint" SimPrevWaypoint -1 0 0x2C 0 0 0 1 "SHORT: Previous Waypoint" SimNextAGWeapon -1 0 0xE 4 0 0 1 "SHORT: Next AG Weapon" SimECMOn -1 0 0x24 0 0 0 1 "SHORT: Toggle Jammer" OTWStepMFD3 -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Step 3rd MFD (like DMS l/r)" OTWStepMFD4 -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Step 4th MFD (like DMS l/r)" SimRadarRangeStepUp -1 0 0x3C 2 0 0 1 "SHORT: Radar Range Up" SimRadarRangeStepDown -1 0 0x3B 2 0 0 1 "SHORT: Radar Range Down" BombRippleIncrement -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Bomb Ripple Increment" BombRippleDecrement -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Bomb Ripple Dencrement" BombIntervalIncrement -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Bomb Interval Increment" BombIntervalDecrement -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Bomb Interval Decrement" BombPairRelease -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Bomb Pair Release" BombSGLRelease -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Bomb Single Release" BombBurstIncrement -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Bomb Burst Altitude Increase" BombBurstDecrement -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Bomb Burst Altitude Decrease" SimHSDRangeStepUp -1 0 0x3E 2 0 0 1 "SHORT: HSD Range Increase" SimHSDRangeStepDown -1 0 0x3D 2 0 0 1 "SHORT: HSD Range Decrease" OTWSwapMFDS -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Swap MFDs" SimRadarBarScanChange -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Radar Bar Scan Change" SimRadarAzimuthScanChange -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Radar Azimuth Scan Change" SimRadarFreeze -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Radar Freeze" SimRadarSnowplow -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Radar Snowplow" SimRadarAAModeStep -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Radar AA Mode Step" SimRadarAGModeStep -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Radar AG Mode Step" SimToggleMissileSpotScan -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Toggle Missile Spot/Scan" SimToggleMissileBoreSlave -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Toggle Missile Bore/Slave" SimToggleMissileTDBPUncage -1 0 0XFFFFFFFF 0 0 0 1 "SHORT: Toggle Missile TD/BP" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 6.03 KEYBOARD FLIGHT CONTROLS ========" AFElevatorUp -1 0 0xC8 3 0 0 1 "FCTRL: Nose Up" AFElevatorDown -1 0 0xD0 3 0 0 1 "FCTRL: Nose Down" AFAileronLeft -1 0 0xCB 3 0 0 1 "FCTRL: Roll Left" AFAileronRight -1 0 0xCD 3 0 0 1 "FCTRL: Roll Right" AFRudderLeft -1 0 0x33 0 0 0 1 "FCTRL: Rudder Left" AFRudderRight -1 0 0x34 0 0 0 1 "FCTRL: Rudder Right" AFCoarseThrottleUp -1 0 0xC8 5 0 0 1 "FCTRL: Throttle Step Up" AFCoarseThrottleDown -1 0 0xD0 5 0 0 1 "FCTRL: Throttle Step Down" AFThrottleUp -1 0 0xC8 6 0 0 1 "FCTRL: Throttle Forward" AFThrottleDown -1 0 0xD0 6 0 0 1 "FCTRL: Throttle Back" AFABOn -1 0 0XFFFFFFFF 0 0 0 1 "FCTRL: Throttle Min. Afterburner" AFABFull -1 0 0XFFFFFFFF 0 0 0 1 "FCTRL: Throttle Full Afterburner" AFIdle -1 0 0XFFFFFFFF 0 0 0 1 "FCTRL: Throttle Idle" AFIncExhaust -1 0 0x34 1 0 0 1 "FCTRL: VTOL-EXHAUST - Increase Angle" AFDecExhaust -1 0 0x33 1 0 0 1 "FCTRL: VTOL-EXHAUST - Decrease Angle" CycleEngine -1 0 0xE 2 0 0 1 "FCTRL: ENGINE - Cycle Engines" selectLeftEngine -1 0 0XFFFFFFFF 0 0 0 1 "FCTRL: ENGINE - Select Left Engine" selectRightEngine -1 0 0XFFFFFFFF 0 0 0 1 "FCTRL: ENGINE - Select Right Engine" selectBothEngines -1 0 0XFFFFFFFF 0 0 0 1 "FCTRL: ENGINE - Select Both Engines" AFTriggerReverseThrust -1 0 0x14 4 0 0 1 "FCTRL: ENGINE - Togg. Thrust Reverser" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 6.04 EXTRA MFD (THIRD) ========" SimCBEOSB_1T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-1 Button - Push" SimCBEOSB_2T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-2 Button - Push" SimCBEOSB_3T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-3 Button - Push" SimCBEOSB_4T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-4 Button - Push" SimCBEOSB_5T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-5 Button - Push" SimCBEOSB_6T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-6 Button - Push" SimCBEOSB_7T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-7 Button - Push" SimCBEOSB_8T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-8 Button - Push" SimCBEOSB_9T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-9 Button - Push" SimCBEOSB_10T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-10 Button - Push" SimCBEOSB_11T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-11 Button - Push" SimCBEOSB_12T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-12 Button - Push" SimCBEOSB_13T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-13 Button - Push" SimCBEOSB_14T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-14 Button - Push" SimCBEOSB_15T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-15 Button - Push" SimCBEOSB_16T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-16 Button - Push" SimCBEOSB_17T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-17 Button - Push" SimCBEOSB_18T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-18 Button - Push" SimCBEOSB_19T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-19 Button - Push" SimCBEOSB_20T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: OSB-20 Button - Push" SimCBEOSB_BRTUP_T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: BRT Button - Increase Brightness" SimCBEOSB_BRTDOWN_T 126 0 0XFFFFFFFF 0 0 0 1 "TMFD: BRT Button - Decrease Brightness" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "TMFD: GAIN Button - Increase (change @ LMFD)" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "TMFD: GAIN Button - Decrease (change @ LMFD)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 6.05 EXTRA MFD (FOURTH) ========" SimCBEOSB_1F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-1 Button - Push" SimCBEOSB_2F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-2 Button - Push" SimCBEOSB_3F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-3 Button - Push" SimCBEOSB_4F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-4 Button - Push" SimCBEOSB_5F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-5 Button - Push" SimCBEOSB_6F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-6 Button - Push" SimCBEOSB_7F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-7 Button - Push" SimCBEOSB_8F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-8 Button - Push" SimCBEOSB_9F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-9 Button - Push" SimCBEOSB_10F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-10 Button - Push" SimCBEOSB_11F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-11 Button - Push" SimCBEOSB_12F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-12 Button - Push" SimCBEOSB_13F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-13 Button - Push" SimCBEOSB_14F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-14 Button - Push" SimCBEOSB_15F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-15 Button - Push" SimCBEOSB_16F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-16 Button - Push" SimCBEOSB_17F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-17 Button - Push" SimCBEOSB_18F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-18 Button - Push" SimCBEOSB_19F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-19 Button - Push" SimCBEOSB_20F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: OSB-20 Button - Push" SimCBEOSB_BRTUP_F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: BRT Button - Increase Brightness" SimCBEOSB_BRTDOWN_F 126 0 0XFFFFFFFF 0 0 0 1 "FMFD: BRT Button - Decrease Brightness" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "FMFD: GAIN Button - Increase (change @ LMFD)" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "FMFD: GAIN Button - Decrease (change @ LMFD)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 6.06 SIMULATION & HARDWARE ========" TimeAccelerate -1 0 0xF 0 0 0 1 "SIM: Time Acceleration - Toggle 2x" TimeAccelerateMaxToggle -1 0 0x3A 0 0 0 1 "SIM: Time Acceleration - Toggle 4x" TimeAccelerateInc -1 0 0xF 1 0 0 1 "SIM: Time Acceleration - Step Up" TimeAccelerateDec -1 0 0x3A 1 0 0 1 "SIM: Time Acceleration - Step Down" SimOpenChatBox -1 0 0x14 1 0 0 1 "SIM: Chat" SimMotionFreeze -1 0 0x19 1 0 0 1 "SIM: Sim-Freeze - Toggle" SimTogglePaused -1 0 0x19 0 0 0 1 "SIM: Sim-Pause - Toggle" SimPause -1 0 0XFFFFFFFF 0 0 0 1 "SIM: Sim - Pause" SimResume -1 0 0XFFFFFFFF 0 0 0 1 "SIM: Sim - Resume" SimDoNothing -1 0 0xB7 0 0 0 -0 "REM: Screenshot (hardcoded, see manual)" ScreenShot -1 0 0XFFFFFFFF 0 0 0 1 "SIM: Screenshot (additional)" PrettyScreenShot -1 0 0xB7 1 0 0 1 "SIM: Pretty Screenshot (additional)" SimEndFlight -1 0 0x1 0 0 0 -0 "SIM: Toggle Exit Sim Menu" OTWToggleNames -1 0 0x29 4 0 0 1 "SIM: Labels Near - Toggle" OTWToggleCampNames -1 0 0x2 4 0 0 1 "SIM: Labels Far - Toggle" OTWToggleFlapDisplay -1 0 0x4 2 0 0 1 "SIM: Flap Display Toggle" OTWToggleEngineDisplay -1 0 0x5 2 0 0 1 "SIM: Engine Display Toggle" ToggleInfoBar -1 0 0x2 2 0 0 1 "SIM: Toggle Infobar" ToggleSubTitles -1 0 0x3 2 0 0 1 "SIM: Toggle Radio Subtitles" PrettyFilm -1 0 0x29 2 0 0 1 "SIM: Pretty Filming (Hide Overlays)" OTWToggleFrameRate -1 0 0x21 0 0x2E 4 1 "SIM: Display Frame Rate - Toggle" OTWToggleScoreDisplay -1 0 0x20 0 0x2E 4 1 "SIM: Show Score Display - Toggle" OTWToggleOnlinePlayersDisplay -1 0 0x18 0 0x2E 4 1 "SIM: Show Online Status - Toggle" OTWToggleHUDRendering -1 0 0x23 0 0x2E 4 1 "SIM: Toggle HUD Rendering" CampaignQuickSave -1 0 0x10 0 0x2E 4 1 "SIM: Campaign-QuickSave (Host only)" SimRandomError -1 0 0x13 0 0x2E 4 1 "SIM: Random Error" CommandsSetKeyCombo -1 0 0x2E 4 0 0 1 "SIM: Key Combination Keys (KeyCombo)" RecenterJoystick -1 0 0x24 0 0x2E 4 1 "SIM: Joystick Recenter" ReloadTrackIR -1 0 0x14 0 0x2E 4 1 "SIM: TrackIR Reload" RecenterTrackIR -1 0 0XFFFFFFFF 0 0 0 1 "SIM: TrackIR Recenter (additional)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 6.07 WINAMP ========" WinAmpNextTrack -1 0 0XFFFFFFFF 0 0 0 1 "WINAMP: Next Track" WinAmpPreviousTrack -1 0 0XFFFFFFFF 0 0 0 1 "WINAMP: Previous Track" WinAmpStartPlayback -1 0 0XFFFFFFFF 0 0 0 1 "WINAMP: Start Playback" WinAmpStopPlayback -1 0 0XFFFFFFFF 0 0 0 1 "WINAMP: Stop Playback" WinAmpTogglePlayback -1 0 0XFFFFFFFF 0 0 0 1 "WINAMP: Toggle Playback" WinAmpTogglePause -1 0 0XFFFFFFFF 0 0 0 1 "WINAMP: Toggle Pause" WinAmpVolumeDown -1 0 0XFFFFFFFF 0 0 0 1 "WINAMP: Volume Down" WinAmpVolumeUp -1 0 0XFFFFFFFF 0 0 0 1 "WINAMP: Volume Up" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "7\. VIEWS" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 7.01 VIEW GENERAL CONTROL ========" OTWViewUp -1 0 0x48 1 0 0 1 "VIEWGEN: Rotate View Up" OTWViewDown -1 0 0x50 1 0 0 1 "VIEWGEN: Rotate View Down" OTWViewLeft -1 0 0x4B 1 0 0 1 "VIEWGEN: Rotate View Left" OTWViewRight -1 0 0x4D 1 0 0 1 "VIEWGEN: Rotate View Right" OTWViewUpRight -1 0 0XFFFFFFFF 0 0 0 1 "VIEWGEN: Rotate View Up-Right" OTWViewUpLeft -1 0 0XFFFFFFFF 0 0 0 1 "VIEWGEN: Rotate View Up-Left" OTWViewDownRight -1 0 0XFFFFFFFF 0 0 0 1 "VIEWGEN: Rotate View Down-Right" OTWViewDownLeft -1 0 0XFFFFFFFF 0 0 0 1 "VIEWGEN: Rotate View Down-Left" FOVToggle -1 0 0x26 0 0 0 1 "VIEWGEN: Look Closer - Toggle" FOVDecrease -1 0 0x4A 1 0 0 1 "VIEWGEN: Decrease FOV – Or Mousewheel" FOVDefault -1 0 0x9C 1 0 0 1 "VIEWGEN: Default FOV" FOVIncrease -1 0 0x4E 1 0 0 1 "VIEWGEN: Increase FOV – Or Mousewheel" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 7.02 VIEW INTERNAL ========" OTWToggleSidebar -1 0 0x4 1 0 0 1 "VIEWINT: Toggle SA bar" OTWStepNextPadlock -1 0 0xD 0 0 0 1 "VIEWINT: Padlock next" OTWStepPrevPadlock -1 0 0xC 0 0 0 1 "VIEWINT: Padlock previous" OTWStepNextPadlockAA -1 0 0xD 1 0 0 1 "VIEWINT: Padlock next AA" OTWStepPrevPadlockAA -1 0 0xC 1 0 0 1 "VIEWINT: Padlock prev AA" OTWStepNextPadlockAG -1 0 0xD 2 0 0 1 "VIEWINT: Padlock next AG" OTWStepPrevPadlockAG -1 0 0xC 2 0 0 1 "VIEWINT: Padlock prev AG" OTWSelectF3PadlockMode -1 0 0x5 0 0 0 1 "VIEWINT: Padlock" OTWSelectF3PadlockModeAA -1 0 0x5 1 0 0 1 "VIEWINT: Padlock Mode=AA" OTWSelectF3PadlockModeAG -1 0 0x5 4 0 0 1 "VIEWINT: Padlock Mode=AG" OTWSelectEFOVPadlockMode -1 0 0x6 0 0 0 1 "VIEWINT: Extended FOV" OTWSelectEFOVPadlockModeAA -1 0 0x6 1 0 0 1 "VIEWINT: Padlock EFOV Mode=AA" OTWSelectEFOVPadlockModeAG -1 0 0x6 4 0 0 1 "VIEWINT: Padlock EFOV Mode=AG" OTWSelectHUDMode -1 0 0x2 0 0 0 1 "VIEWINT: HUD Only" OTWSelect2DCockpitMode -1 0 0x3 0 0 0 1 "VIEWINT: Snap (3D) Cockpit" OTWSelect3DCockpitMode -1 0 0x4 0 0 0 1 "VIEWINT: Pan (3D) Cockpit" OTWToggle3DEmptyShell -1 0 0x3 1 0 0 1 "VIEWINT: Toggle Empty Cockpit Shell" OTWToggleCustom3dPitView -1 0 0x7 2 0 0 1 "VIEWINT: Toggle Custom 3dPit View" OTWNextCustom3dPitView -1 0 0x8 4 0 0 1 "VIEWINT: Next Custom 3dPit View" OTWPrevCustom3dPitView -1 0 0x7 4 0 0 1 "VIEWINT: Previous Custom 3dPit View" OTWGlanceForward -1 0 0x49 1 0 0 1 "VIEWINT: Glance Forward" OTWCheckSix -1 0 0x51 1 0 0 1 "VIEWINT: Glance Backward" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 7.03 VIEW EXTERNAL ========" OTWViewZoomIn -1 0 0x4F 1 0 0 1 "VIEWEXT: Zoom In" OTWViewZoomOut -1 0 0x47 1 0 0 1 "VIEWEXT: Zoom Out" OTWViewReset -1 0 0x4C 1 0 0 1 "VIEWEXT: Reset View" OTWTrackExternal -1 0 0x7 0 0 0 1 "VIEWEXT: Target-To-Self Camera" OTWTrackTargetToWeapon -1 0 0x8 2 0 0 1 "VIEWEXT: Target-to-Weapon Camera" OTWStepNextAC -1 0 0xD 4 0 0 1 "VIEWEXT: Next Aircraft" OTWStepPrevAC -1 0 0xC 4 0 0 1 "VIEWEXT: Previous Aircraft" OTWSelectOrbitMode -1 0 0xB 0 0 0 1 "VIEWEXT: Orbit Camera" OTWSelectAirFriendlyMode -1 0 0x9 0 0 0 1 "VIEWEXT: Friendly Aircraft Camera" OTWSelectGroundFriendlyMode -1 0 0x9 1 0 0 1 "VIEWEXT: Friendly Ground Unit Camera" OTWSelectAirEnemyMode -1 0 0x9 2 0 0 1 "VIEWEXT: Enemy Aircraft Camera" OTWSelectGroundEnemyMode -1 0 0x9 4 0 0 1 "VIEWEXT: Enemy Ground Unit Camera" OTWSelectTargetMode -1 0 0x7 1 0 0 1 "VIEWEXT: Target Camera" OTWSelectWeaponMode -1 0 0x8 1 0 0 1 "VIEWEXT: Weapon Camera" OTWSelectSatelliteMode -1 0 0x29 0 0 0 1 "VIEWEXT: Satellite Camera" OTWSelectFlybyMode -1 0 0xA 1 0 0 1 "VIEWEXT: Flyby Camera" OTWSelectIncomingMode -1 0 0x8 0 0 0 1 "VIEWEXT: Incoming Camera" OTWSelectChaseMode -1 0 0xA 0 0 0 1 "VIEWEXT: Chase Camera" ToggleDisplacementCam -1 0 0xB 1 0 0 1 "VIEWEXT: Toggle Displacement Camera" OTWSelectTopGunView -1 0 0xA 2 0 0 1 "VIEWEXT: TopGun Camera" OTWSelectNextTopGunView -1 0 0xB 4 0 0 1 "VIEWEXT: Next TopGun View" OTWSelectPrevTopGunView -1 0 0xA 4 0 0 1 "VIEWEXT: Prev TopGun View" OTWToggleActionCamera -1 0 0x29 1 0 0 1 "VIEWEXT: Action Camera" OTWToggleEyeFly -1 0 0xB 2 0 0 1 "VIEWEXT: Toggle EyeFly (Free Cam)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "8\. RADIO COMMS" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 8.01 GENERAL RADIO OPTIONS ========" RadioAWACSCommand -1 0 0x10 0 0 0 -0 "RADIO: AWACS Menu" RadioWingCommand -1 0 0x11 0 0 0 -0 "RADIO: Wingman Menu" RadioElementCommand -1 0 0x12 0 0 0 -0 "RADIO: Element Menu" RadioFlightCommand -1 0 0x13 0 0 0 -0 "RADIO: Flight Menu" RadioTowerCommand -1 0 0x14 0 0 0 -0 "RADIO: ATC Menu" RadioTankerCommand -1 0 0x15 0 0 0 -0 "RADIO: Tanker Menu" RadioMessageSend -1 0 0x10 0 0XFFFFFFFF 0 -2 "Radio-send message AWACS" OTWRadioMenuStep -1 0 0x10 0 0x10 1 -2 "Radio-next menu AWACS" OTWRadioMenuStep -1 0 0x10 0 0x10 0 -2 "Radio-next menu AWACS" OTWRadioMenuStepBack -1 0 0x10 1 0x10 1 -2 "Radio-previous menu AWACS" OTWRadioMenuStepBack -1 0 0x10 1 0x10 0 -2 "Radio-previous menu AWACS" RadioMessageSend -1 0 0x11 0 0XFFFFFFFF 0 -2 "Radio-send message Wingman" OTWRadioMenuStep -1 0 0x11 0 0x11 1 -2 "Radio-next menu Wingman" OTWRadioMenuStep -1 0 0x11 0 0x11 0 -2 "Radio-next menu Wingman" OTWRadioMenuStepBack -1 0 0x11 1 0x11 1 -2 "Radio-previous menu Wingman" OTWRadioMenuStepBack -1 0 0x11 1 0x11 0 -2 "Radio-previous menu Wingman" RadioMessageSend -1 0 0x12 0 0XFFFFFFFF 0 -2 "Radio-send message Element" OTWRadioMenuStep -1 0 0x12 0 0x12 1 -2 "Radio-next menu Element" OTWRadioMenuStep -1 0 0x12 0 0x12 0 -2 "Radio-next menu Element" OTWRadioMenuStepBack -1 0 0x12 1 0x12 1 -2 "Radio-previous menu Element" OTWRadioMenuStepBack -1 0 0x12 1 0x12 0 -2 "Radio-previous menu Element" RadioMessageSend -1 0 0x13 0 0XFFFFFFFF 0 -2 "Radio-send message Flight" OTWRadioMenuStep -1 0 0x13 0 0x13 1 -2 "Radio-next menu Flight" OTWRadioMenuStep -1 0 0x13 0 0x13 0 -2 "Radio-next menu Flight" OTWRadioMenuStepBack -1 0 0x13 1 0x13 1 -2 "Radio-previous menu Flight" OTWRadioMenuStepBack -1 0 0x13 1 0x13 0 -2 "Radio-previous menu Flight" RadioMessageSend -1 0 0x14 0 0XFFFFFFFF 0 -2 "Radio-send message ATC" OTWRadioMenuStep -1 0 0x14 0 0x14 1 -2 "Radio-Next Menu ATC" OTWRadioMenuStep -1 0 0x14 0 0x14 0 -2 "Radio-Next Menu ATC" OTWRadioMenuStepBack -1 0 0x14 1 0x14 1 -2 "Radio-Previous Menu ATC" OTWRadioMenuStepBack -1 0 0x14 1 0x14 0 -2 "Radio-Previous Menu ATC" RadioMessageSend -1 0 0x15 0 0XFFFFFFFF 0 -2 "Radio-Send Message Tanker" OTWRadioMenuStep -1 0 0x15 0 0x15 1 -2 "Radio-Next Menu Tanker" OTWRadioMenuStep -1 0 0x15 0 0x15 0 -2 "Radio-Next Menu Tanker" OTWRadioMenuStepBack -1 0 0x15 1 0x15 1 -2 "Radio-Previous Menu Tanker" OTWRadioMenuStepBack -1 0 0x15 1 0x15 0 -2 "Radio-Previous Menu Tanker" RadioMenuOne -1 0 0XFFFFFFFF 0 0 0 1 "RADIO: Menu One" RadioMenuTwo -1 0 0XFFFFFFFF 0 0 0 1 "RADIO: Menu Two" RadioMenuThree -1 0 0XFFFFFFFF 0 0 0 1 "RADIO: Menu Three" RadioMenuFour -1 0 0XFFFFFFFF 0 0 0 1 "RADIO: Menu Four" RadioMenuFive -1 0 0XFFFFFFFF 0 0 0 1 "RADIO: Menu Five" RadioMenuSix -1 0 0XFFFFFFFF 0 0 0 1 "RADIO: Menu Six" RadioMenuSeven -1 0 0XFFFFFFFF 0 0 0 1 "RADIO: Menu Seven" RadioMenuEight -1 0 0XFFFFFFFF 0 0 0 1 "RADIO: Menu Eight" RadioMenuNine -1 0 0XFFFFFFFF 0 0 0 1 "RADIO: Menu Nine" OTWRadioMenuClear -1 0 0XFFFFFFFF 0 0 0 1 "RADIO: Menu Clear" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 8.02 AWACS COMMS ========" AWACSRequestPicture -1 0 0XFFFFFFFF 0 0 0 1 "AWACS: Request Picture" AWACSDeclare -1 0 0XFFFFFFFF 0 0 0 1 "AWACS: Declare" AWACSRequestHelp -1 0 0XFFFFFFFF 0 0 0 1 "AWACS: Request Help" AWACSWilco -1 0 0XFFFFFFFF 0 0 0 1 "AWACS: Wilco" AWACSUnable -1 0 0XFFFFFFFF 0 0 0 1 "AWACS: Unable" AWACSRequestRelief -1 0 0XFFFFFFFF 0 0 0 1 "AWACS: Request Relief" AWACSVectorToThreat -1 0 0XFFFFFFFF 0 0 0 1 "AWACS: Vector To Nearest Threat" AWACSRequestTanker -1 0 0XFFFFFFFF 0 0 0 1 "AWACS: Vector To Tanker" AWACSRequestCarrier -1 0 0XFFFFFFFF 0 0 0 1 "AWACS: Vector To Carrier Group" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 8.03 ATC COMMS ========" ATCRequestClearance -1 0 0XFFFFFFFF 0 0 0 1 "ATC: Inbound For Landing" ATCRequestEmergencyClearance -1 0 0XFFFFFFFF 0 0 0 1 "ATC: Declaring An Emergency" ATCAbortApproach -1 0 0XFFFFFFFF 0 0 0 1 "ATC: Abort Approach" ATCRequestTaxi -1 0 0XFFFFFFFF 0 0 0 1 "ATC: Request Taxi" ATCRequestTakeoff -1 0 0XFFFFFFFF 0 0 0 1 "ATC: Request Takeoff" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 8.04 TANKER COMMS ========" TankerRequestFuel -1 0 0XFFFFFFFF 0 0 0 1 "TANKER: Request Fuel" TankerReadyForGas -1 0 0XFFFFFFFF 0 0 0 1 "TANKER: Ready For Gas" TankerDoneRefueling -1 0 0XFFFFFFFF 0 0 0 1 "TANKER: Done Refueling" TankerBreakaway -1 0 0XFFFFFFFF 0 0 0 1 "TANKER: Breakaway" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 8.05 WINGMAN COMMANDS ========" WingmanDesignateTarget -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Attack My Target" WingmanWeaponsFree -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Weapons Free" WingmanWeaponsHold -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Weapons Hold" WingmanCheckSix -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Check Your Six" WingmanClearSix -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Clear My Six" WingmanDesignateGroup -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Attack Targets" WingmanGoShooterMode -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Shooter" WingmanGoCoverMode -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Cover" WingmanRejoin -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Rejoin" WingmanPince -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Pince" WingmanPosthole -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Posthole" WingmanChainsaw -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Chainsaw" WingmanDropStores -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Drop Stores" WingmanSendGrdDL -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Datalink Ground Target" WingmanResumeNormal -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Resume Mission" WingmanRTB -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Return to Base" WingmanGiveBra -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Say Position" WingmanGiveDamageReport -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Say Damage" WingmanGiveStatus -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Say Status" WingmanGiveFuelState -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Say Fuel" WingmanGiveWeaponsCheck -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Say Weapons" WingmanCloseup -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Close Up" WingmanToggleSide -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Switch Side" WingmanBreakRight -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Break Right" WingmanBreakLeft -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Break Left" WingmanIncreaseRelAlt -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Higher" WingmanDecreaseRelAlt -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Lower" WingmanFlex -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Flex" WingmanKickout -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Kickout" WingmanWedge -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Wedge" WingmanTrail -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Trail" WingmanLadder -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Ladder" WingmanStack -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Stack" WingmanFluid -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Fluid" WingmanSpread -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Spread" WingmanArrow -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Arrowhead" WingmanEchelonRight -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Echelon Right" WingmanEchelonLeft -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Echelon Left" WingmanLine -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Line" WingmanDiamond -1 0 0XFFFFFFFF 0 0 0 1 "WINGMAN: Go Diamond" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 8.06 ELEMENT COMMANDS ========" ElementDesignateTarget -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Attack My Target" ElementWeaponsFree -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Weapons Free" ElementWeaponsHold -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Weapons Hold" ElementCheckSix -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Check Your Six" ElementClearSix -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Clear My Six" ElementDesignateGroup -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Attack Targets" ElementRejoin -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Rejoin" ElementPince -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Pince" ElementPosthole -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Posthole" ElementChainsaw -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Chainsaw" ElementDropStores -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Drop Stores" ElementSendGrnDL -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Datalink Ground Target" ElementResumeNormal -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Resume Mission" ElementRTB -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Return to Base" ElementGiveBra -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Say Position" ElementGiveDamageReport -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Say Damage" ElementGiveStatus -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Say Status" ElementGiveFuelState -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Say Fuel" ElementGiveWeaponsCheck -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Say Weapons" ElementCloseup -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Close Up" ElementToggleSide -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Switch Side" ElementBreakRight -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Break Right" ElementBreakLeft -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Break Left" ElementIncreaseRelAlt -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Go Higher" ElementDecreaseRelAlt -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Go Lower" ElementFlex -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Flex" ElementKickout -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Kickout" ElementWedge -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Go Wedge" ElementTrail -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Go Trail" ElementLadder -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Go Ladder" ElementStack -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Go Stack" ElementFluid -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Go Fluid" ElementSpread -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Go Spread" ElementArrow -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Go Arrowhead" ElementEchelonRight -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Go Echelon Right" ElementEchelonLeft -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Go Echelon Left" ElementLine -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Go Line" ElementDiamond -1 0 0XFFFFFFFF 0 0 0 1 "ELEMENT: Go Diamond" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 8.07 FLIGHT COMMANDS ========" FlightDesignateTarget -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Attack My Target" FlightWeaponsFree -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Weapons Free" FlightWeaponsHold -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Weapons Hold" FlightCheckSix -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Check Your Six" FlightClearSix -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Clear My Six" FlightDesignateGroup -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Attack Target" FlightRejoin -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Rejoin" FlightPince -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Pince" FlightPosthole -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Posthole" FlightChainsaw -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Chainsaw" FlightDropStores -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Drop Store" FlightSendGrnDL -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Datalink Ground Target" FlightResumeNormal -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Resume Mission" FlightRTB -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Return to Base" FlightGiveBra -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Say Position" FlightGiveDamageReport -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Say Damage" FlightGiveStatus -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Say Status" FlightGiveFuelState -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Say Fuel" FlightGiveWeaponsCheck -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Say Weapon" FlightCloseup -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Close Up" FlightToggleSide -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Switch Side" FlightBreakRight -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Break Right" FlightBreakLeft -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Break Left" FlightIncreaseRelAlt -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Higher" FlightDecreaseRelAlt -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Lower" FlightFlex -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Flex" FlightKickout -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Kickout" FlightWedge -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Wedge" FlightTrail -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Trail" FlightLadder -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Ladder" FlightStack -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Stack" FlightFluid -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Fluid" FlightSpread -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Spread" FlightArrow -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Arrowhead" FlightBox -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Box" FlightResCell -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Res Cell" FlightVic -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go VIC" FlightLine -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Line" FlightFinger4 -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Finger Four" FlightEchelonRight -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Echolon Left" FlightEchelonLeft -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Echolon Right" FlightDiamond -1 0 0XFFFFFFFF 0 0 0 1 "FLIGHT: Go Diamond" #=================================================================================== #=============================DX LINES BEGIN HERE==================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -2 "========= HOTAS UNSHIFTED =========" SimTriggerFirstDetent 0 -1 -2 0 0x0 -1 SimPickle 1 -1 -2 0 0x0 -1 RecenterTrackIR 2 -1 -2 0 0x0 -1 SimMissileStep 3 -1 -2 0 0x0 -1 PrettyScreenShot 4 -1 -2 0 0x0 -1 SimHotasPinkyShift 5 -1 -2 0 0x0 -1 AFBrakesToggle 6 -1 -2 0 0x0 -1 SimToggleMissileCage 7 -1 -2 0 0x0 -1 SimArmMasterArm 8 -1 -2 0 0x0 311 SimSafeMasterArm 9 -1 -2 0 0x0 311 SimExtlMasterNorm 10 -1 -2 0 0x0 115 SimExtlMasterOff 11 -1 -2 0 0x0 115 AFGearUp 12 -1 -2 0 0x0 119 AFGearDown 13 -1 -2 0 0x0 118 SimTriggerSecondDetent 14 -1 -2 0 0x0 -1 SimCursorEnable 15 -1 -2 0 0x0 -1 SimRadarRangeStepDown 16 -1 -2 0 0x0 -1 SimRadarRangeStepUp 17 -1 -2 0 0x0 -1 SimRFNorm 18 -1 -2 0 0x0 310 SimTMSUp 19 -1 -2 0 0x0 -1 SimTMSRight 20 -1 -2 0 0x0 -1 SimTMSDown 21 -1 -2 0 0x0 -1 SimTMSLeft 22 -1 -2 0 0x0 -1 SimTransmitCom1 23 -1 -2 0 0x0 -1 SimCommsSwitchRight 24 -1 -2 0 0x0 -1 SimTransmitCom2 25 -1 -2 0 0x0 -1 SimCommsSwitchLeft 26 -1 -2 0 0x0 -1 SimSelectMRMOverride 27 -1 -2 0 0x0 -1 SimDeselectOverride 28 -1 -2 0 0x0 -1 SimSelectSRMOverride 29 -1 -2 0 0x0 -1 SimDoNothing 30 -1 -2 0 0x0 -1 AWACSDeclare 31 -1 -2 0 0x0 -1 SimDMSUp 0 -1 -3 0 0x0 -1 SimDoNothing 0 -1 -3 1 0x0 -1 SimDMSRight 0 -1 -3 2 0x0 -1 SimDoNothing 0 -1 -3 3 0x0 -1 SimDMSDown 0 -1 -3 4 0x0 -1 SimDoNothing 0 -1 -3 5 0x0 -1 SimDMSLeft 0 -1 -3 6 0x0 -1 SimDoNothing 0 -1 -3 7 0x0 -1 #================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -2 "========= HOTAS SHIFTED =========" SimWheelBrakes 256 -1 -2 0 0x0 -1 SimEmergencyJettison 257 -1 -2 0 0x0 123 ReloadTrackIR 258 -1 -2 0 0x0 -1 SimCATSwitch 259 -1 -2 0 0x0 115 AFResetTrim 260 -1 -2 0 0x0 -1 SimHotasPinkyShift 261 -1 -2 0 0x0 -1 SimCBEOSB_6L 262 -1 -2 0 0x0 126 SimCBEOSB_8L 263 -1 -2 0 0x0 126 SimLaserArmOn 264 -1 -2 0 0x0 310 SimLaserArmOff 265 -1 -2 0 0x0 310 SimAVTRSwitchOn 266 -1 -2 0 0x0 115 SimAVTRSwitchOff 267 -1 -2 0 0x0 115 SimFuelDoorOpen 268 -1 -2 0 0x0 311 SimFuelDoorClose 269 -1 -2 0 0x0 311 SimDoNothing 270 -1 -2 0 0x0 -1 SimRadarCursorZero 271 -1 -2 0 0x0 -1 SimHSDRangeStepDown 272 -1 -2 0 0x0 -1 SimHSDRangeStepUp 273 -1 -2 0 0x0 -1 SimRFQuiet 274 -1 -2 0 0x0 310 SimCMSUp 275 -1 -2 0 0x0 -1 SimCMSRight 276 -1 -2 0 0x0 -1 SimCMSDown 277 -1 -2 0 0x0 -1 SimCMSLeft 278 -1 -2 0 0x0 -1 SimTransmitCom1 279 -1 -2 0 0x0 -1 SimRadarBarScanChange 280 -1 -2 0 0x0 -1 SimTransmitCom2 281 -1 -2 0 0x0 -1 SimRadarAzimuthScanChange 282 -1 -2 0 0x0 -1 SimSelectMRMOverride 283 -1 -2 0 0x0 -1 SimDeselectOverride 284 -1 -2 0 0x0 -1 SimSelectSRMOverride 285 -1 -2 0 0x0 -1 SimDoNothing 286 -1 -2 0 0x0 -1 AWACSVectorToThreat 287 -1 -2 0 0x0 -1 AFElevatorTrimUp 2 -1 -3 0 0x0 -1 SimDoNothing 2 -1 -3 1 0x0 -1 AFAileronTrimRight 2 -1 -3 2 0x0 -1 SimDoNothing 2 -1 -3 3 0x0 -1 AFElevatorTrimDown 2 -1 -3 4 0x0 -1 SimDoNothing 2 -1 -3 5 0x0 -1 AFAileronTrimLeft 2 -1 -3 6 0x0 -1 SimDoNothing 2 -1 -3 7 0x0 -1
What you will have to reconcile is this:
In the example above, what is not accounted for are the few keyboard emulation press that are on the HOTAS. Most notably the cursor slew commands. You will have to go back into the keyboard section of the keyfile and make sure those keyboard presses and what is in the Saitek SST .pr0 file are the same. They will not be (probably) by just copying and pasting your two favorite sections together.
Hope that helps. Ask more questions if you need clarification. Also check Kolbe’s excellent guides on key files in your docs folders …. x:\Falcon BMS 4.33 U1\Docs\Key Files & Input . Especially useful might be: BMS Key File Manual.pdf
-
Actually the twist rudder annoys me lol. So I can actually get used to not having it. It makes me look drunk when trying to land. haha.
I saw a post from you from 2015 posting Scuby and Hard~Lock profiles. Are those considered outdated since SST is not recommended (From what I’ve been reading)?
https://www.benchmarksims.org/forum/showthread.php?22255-X52-pro-setup-query
-
Yes, both Hard~Deck and Scuby had profiles that were well received by the community. I think both were mainly Saitek SST based (key press emulation). There are ‘fors’ and ‘againsts’ with regard to DX vs keypress emulation, and I’m strongly in the FOR DX camp.
As far as functionality, there have been some changes in commands and/or key presses from BMS 4.32 to 4.33. A profile made for 4.32 may expose some of those differences. I don’t recall for sure, but I’m fairly sure that there is information in the docs I linked earlier on some of those differences.
Edit:
Also, just for clarity, the last bunch of key file code I posted above should be a working keyfile that is the BMS Full keyboard + the Flounder HOTAS DX commands. Except for the reconciliation of the slew commands with SST, it should work. You should be able to copy/paste into Notepad (or similar) and save it/name it as .key file.
-
Since we are assuming we are using The SST for cursor slew commands, I can use Flounder’s SST PR0 profile for this purpose or would that not work?
-
Since we are assuming we are using The SST for cursor slew commands, I can use Flounder’s SST PR0 profile for this purpose or would that not work?
You could, but you still would have to take the keyboard part of the .key file and assign the slew commands.
For example, if the slew in the SST .pr0 file is F8, F9, F10 and F11, you need to assign these commands in BMS to F8, F9, F10 and F11:
SimCursorUp -1 0 0xC8 1 0 0 1 “TQS: RDR CURSOR - Up”
SimCursorDown -1 0 0xD0 1 0 0 1 “TQS: RDR CURSOR - Down”
SimCursorLeft -1 0 0xCB 1 0 0 1 “TQS: RDR CURSOR - Left”
SimCursorRight -1 0 0xCD 1 0 0 1 “TQS: RDR CURSOR - Right”OR ….
You would have to change the assignment in SST to whatever keys 0xC8, 0xD0, 0xCB and 0xCD are (they are the -> keys … Up, Down, Left and Right).
The main point: The key press in SST has to be the same key in the .key file.
-
I can start to see why SST software is pretty much obsolete since the DX commands can be programmed directly into the .key file. I may need to read up more on how to use the BMS keyfile Excel spreadsheet as well. Can’t hurt but may make things easier to assign. Does anyone use Mode 2 or Mode 3. I assume this would definitely change the dx value, or in other words, the button # that responds in this mode.
-
I can start to see why SST software is pretty much obsolete since the DX commands can be programmed directly into the .key file. I may need to read up more on how to use the BMS keyfile Excel spreadsheet as well. Can’t hurt but may make things easier to assign. Does anyone use Mode 2 or Mode 3. I assume this would definitely change the dx value, or in other words, the button # that responds in this mode.
You cannot use the mode switch to ‘create’ additional layers in DX. They work that way in SST, but will not in DX. In DX the Mode switch is just 3 buttons (Up, Down and Middle; buttons #27, #28 and #29 to BMS).
The best way to use them in DX (in my humble but biased opinion) is to set the middle position as the DF Override position (i.e., AA, AG or NAV, whichever is currently selected Master Mode) with the Up and Down positions as DogFight and MRM mastermodes. It’s are very effective configuration.
Basically AA and MRM act the same.
So you set up in the middle position as NAV or AG depending on what you’re doing at the time. If you need to switch (or fly) in a general AA mode, move to the MRM position. If you need to Dogfight (WVR), the first move of the switch (say from down to middle) cancels MRM. The next move (from middle to Up) engages Dogfight. And the same thing going in the direction Dogfight to Cancel to MRM.
-
This may be a really dumb question but I’ll ask it anyway. When moving the radar cursor and selecting an object, which command allows you to select that. I want to be sure I can use the little button next to the mini stick to select that object. I’m not sure how it’s currently done in the DX command list.
-
You cannot use the mode switch to ‘create’ additional layers in DX. They work that way in SST, but will not in DX. In DX the Mode switch is just 3 buttons (Up, Down and Middle; buttons #27, #28 and #29 to BMS).
The best way to use them in DX (in my humble but biased opinion) is to set the middle position as the DF Override position (i.e., AA, AG or NAV, whichever is currently selected Master Mode) with the Up and Down positions as DogFight and MRM mastermodes. It’s are very effective configuration.
Basically AA and MRM act the same.
So you set up in the middle position as NAV or AG depending on what you’re doing at the time. If you need to switch (or fly) in a general AA mode, move to the MRM position. If you need to Dogfight (WVR), the first move of the switch (say from down to middle) cancels MRM. The next move (from middle to Up) engages Dogfight. And the same thing going in the direction Dogfight to Cancel to MRM.
I think this was my next question in regards to how to switch between NAV, A-A and A-G if I didn’t use SST.
-
I saw in a post named “Okay, I’m confused” regarding applying the registry fix for Axis manipulation and activating the MiniStick for the X-52 Pro. Do you suggest applying this? https://www.benchmarksims.org/forum/showthread.php?33116-Okay-I-m-confused&highlight=mini+stick+registry
Turns off Big Rotary NOT Twist Rudder. Use Reg information posted below by Agave_Blue to remove Twist Rudder and keep Big Rotary.
Windows Registry Editor Version 5.00 [-HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes] [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes] [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\0] @="X" "Attributes"=hex:01,81,00,00,01,00,30,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\1] @="Y" "Attributes"=hex:01,81,00,00,01,00,31,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\2] @="Throttle" "Attributes"=hex:01,81,00,00,01,00,32,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\3] @="Ministick X" "Attributes"=hex:01,81,00,00,05,00,24,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\4] @="Ministick Y" "Attributes"=hex:01,81,00,00,05,00,26,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\7] @="Slider" "Attributes"=hex:01,81,00,00,01,00,36,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\6] @="Rudder" "Attributes"=hex:01,81,00,00,01,00,35,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\5] @="Rotary small" "Attributes"=hex:01,81,00,00,01,00,33,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\8] @="Rotary big" "Attributes"=hex:01,81,00,00,01,00,34,00
-
Yes, 100%.
It turns off your twist rudder as an axis and turns on your mini-stick/cursor in it’s place.
If you do this, you don’t need ANY BMS function mapped in SST.
Check that your reigistry has the same PID …. VID_06A3&PID_0762
The reg edit file I used for mine is below … just for comparison if nothing else:
Windows Registry Editor Version 5.00 [-HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes] [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes] [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\0] @="X" "Attributes"=hex:01,81,00,00,01,00,30,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\1] @="Y" "Attributes"=hex:01,81,00,00,01,00,31,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\2] @="Throttle 1" "Attributes"=hex:01,81,00,00,01,00,32,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\3] @="Ministick X" "Attributes"=hex:01,81,00,00,05,00,24,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\4] @="Ministick Y" "Attributes"=hex:01,81,00,00,05,00,26,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\7] @="Slider" "Attributes"=hex:01,81,00,00,01,00,36,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\6] @="Rotary 2" "Attributes"=hex:01,81,00,00,01,00,34,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\5] @="Rotary 1" "Attributes"=hex:01,81,00,00,01,00,33,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0762\Axes\8] @="Rudder" "Attributes"=hex:01,81,00,00,01,00,35,00
Copy and paste to Notepad (or similar) and save as [Filename.reg]. When you click/double-click it will run and edit your registry.
-
This may be a really dumb question but I’ll ask it anyway. When moving the radar cursor and selecting an object, which command allows you to select that. I want to be sure I can use the little button next to the mini stick to select that object. I’m not sure how it’s currently done in the DX command list.
No. You use TMS UP to designate a contact. TMS DOWN to un-designate (basically).
Suggest you refer to the HOTAS diagram in the BMS dash 1 file …. around pages 28 and 56. That tells you what each HOTAS function does (some are multi-function and/or master mode dependent) and what the corresponding BMS command is.
This document: x:\Falcon BMS 4.33 U1\Docs\Falcon BMS Manuals\TO-BMS1F-16CM-1.pdf
-
This post is deleted! -
It should be noted: The first REG file he posted from my other post turns off the BIG ROTARY not the Twist Rudder. To turn off the Rudder use the one Agave posted.
Also, if anyone reading this in the future is Copy/Pasting the First one, there are spaces in the lines between V ID which have to be removed before it will work.
I’ll made a quick edit reflecting this.
-
I took out the Logitech SST software and made sure not to select clutch in the controller properties in Windows. My issue now is that when I try to move the cursor, it won’t move. There is an icon in the MFD on the left side that moves up and down if I move the stick (I think left and right) but the cursor stays in the center. The directX mini stick is applied in Windows. I also have the mini stick chosen in BMS under avionics control for radar range and etc. (it’s the 1st and 3rd option) and when I move the ministick, the bars go up and down. It is something preventing the cursor moving in flight?
Also can’t move the external view even though it’s chosen in the settings to do so.
-
…. The directX mini stick is applied in Windows. I also have the mini stick chosen in BMS under avionics control for radar range and etc. (it’s the 1st and 3rd option) and when I move the ministick, the bars go up and down. It is something preventing the cursor moving in flight? ……
That is the critical bit. If that works in the UI, it should work in game.
OK, dumb question (sorry) …. when you try moving the cursor in-game, are you in the air? Radar won’t slew on the ground.
Edit,
BTW, I believe the ‘y’ cursor needs to be marked reversed in the UI. Not relevant to the problem above, but once you get it working, it’ll matter.
-
I just running the practice landings and testing the radar cursor there. I’ll check the y cursor and see if it helps.
-
I just running the practice landings and testing the radar cursor there. I’ll check the y cursor and see if it helps.
Ok, as long as you have weight off wheels.
I don’t recall for sure, but I think the FCR has to be Sensor of Interest (SOI) to slew (pretty sure). You can tell which sensor is sensor of interest because the MFD will be outlined. Change SOI with DMS Down.
You also said, “There is an icon in the MFD on the left side that moves up and down if I move the stick (I think left and right) but the cursor stays in the center.” What is it? Can you take a picture pointing it out or post a vid?
-
I’m starting to wonder if I should go back and apply the latest drivers for the stick. Logitech’s where something like 8.x.x.x where Saitek Win 10 defaults is at 6.2.2.0 dated 2/15/2008. I did remove the drivers just in case but maybe they are needed?
The reverse option for Y didn’t do anything so I’ll explain in more detail. When I perform the quick landing mission, I’m in the air. So here I test my MDF cursor. On the bottom is a T Symbol moving left and right. On the left side is the same T just turned in a different way. When the mini stick is moved left to right, it goes up and down. The two sets of numbers next to the cursor also changes values, but the cursor does not move. This is why I was wondering if my drivers should be updated or if there is a preferred drivers version I need to update to.