Saitek X-52 Profile
-
After spending a few hours with Inquisitor dealing with a similar issue, it turned out that his drivers and software were out dated. However, installing new software and drivers did not work. He had to un-install both and delete everthing related to Saitek from the registry. Once that was done and he reinstalled his drivers and software everything worked perfectly.
-
@Hard~Deck:
After spending a few hours with Inquisitor dealing with a similar issue, it turned out that his drivers and software were out dated. However, installing new software and drivers did not work. He had to un-install both and delete everthing related to Saitek from the registry. Once that was done and he reinstalled his drivers and software everything worked perfectly.
So you think Inquisitor’s issue is similiar to mine too? Is he running Windows 7 64-bit like I am?
-
Hey Sherlock, what a bear it was troubleshooting this bugger. In BMS if I clicked on a button it should tell me what is assigned to that button and it wasnt for a ton of them. In the profiler if I hit a button the profiler would light up but I got random response from the config tester in the SST software. This was happening with any of the profiles I tried using, sooooo I uninstalled the SST software and saitek drivers cleaned the registry of everything saitek, downloaded fresh drivers and softwareand Viola! everything came up. And yes I am running Win7 64
-
So you think Inquisitor’s issue is similiar to mine too? Is he running Windows 7 64-bit like I am?
Could be…
I would go over post’s 19-20 first, just to be sure.
-
@Hard~Deck:
Could be…
I would go over post’s 19-20 first, just to be sure.OK, it’s stump the dummy time. :O)
I see in your first picture (in post 19) that you have circled the “Fire” button in red and show it as “Unprogrammed” in the “Click to add shift command” selection to the right (in the profile editor). But I can’t figure out how to set the shift selection for EACH button Differently. My profile doesn’t have the “Unprogrammed” selection checked but when I select it and go on to the next button (e.g., “Fire C”) then the “Unprogrammed” selection is there for that button.
-
Are you calling me a DUMMY?
I’m not sure exactly what you mean…:-(
Are you saying it won’t let you place a check mark next to “Fall Back”?
I am going to jump on the 69th TS for a bit…I have to leave soon, but if you can jump on before then,
maybe I can help you out real quick.Otherwise, I can meet you around 9pm Pacific.
PM Sent.
-
Hey hard, real quick question for you. On your profile you have the Cat-1/cat-3 set to mode 2 and three. How would i go about changing that so that when im in mode 2 it will cycle my next steer point and when im in mode 3 it cycles backwards through the steer points.
Because i dont use the cat1/3 thing at all, i just click that in the cockpit itself.
-
Mode 2 is empty…
The commands for steerpoint increse/decrease are Page Up/Page Down respectively.
No need for an advanced command, just go into the SST and assign them where you want.
-
Hey Hard~Deck,
I think I found what was causing the problem. See this thread: https://www.benchmarksims.org/forum/showthread.php?8742-Thrustmaster-MFDs-may-cause-conflict-with-X52 -
Hard~Deck I downloaded your profile and installed it, went through all your pics of settings, loaded the keyfile but a lot of the keys are still unassigned. Do you have to go through and assign all the buttons in the setup menus in BMS? I already did the CMS, DMS, and TMS hats but there are a lot still not working. I don’t have track ir or cougar mfd’s. Also having some trouble locating some of the keys in the setup menu. Thanks for the profile it looks really good!
Edit: I also assigned the three rocker switches at the base of the throtle. Still have several on the stick and throttle to assign.
-
PM me and let me know when ou’re available to jump on Teamspeak.
I’ll do the best I can to help.
-
I’m having a bit of a problem here. there is no way i can Lock on \ off a target…
-
Make sure you have “BMS HD Final.pr0” loaded in your Saitek Profiler…also make sure you load the “BMS HD Final.key” loaded in the Setup/Controllers UI in Falcon.
One by one, go through and test TMS up, down, left, and right buttons to verify the assignments match the button mapping image that came with the download.
-
hi harddeck,your profile seemed to me more realistic among other guys x-52 profiles…
i’ve just got new X-52, but i dont have TrackIR. So i have to use one of the HAT Switch on the stick to look around… Do you have any proper profile for that ? Thanks in advance… -
Love your profile HardDeck - just wanted to chime in and say thanks!
One thing I keep doing - I fly all the way to my SEAD target, take out any radars with my AGM-88’s, then retrim the aircraft in mode 3.
forget to go back to mode one, ccrp , release cue , hold pickle and eject ! :headb: -
I am having serious issues because of another controller’s ID. A couple things work, but how do I remap the primary buttons if the button itself does not work? The scroll wheel on the throttle is not recognized in game, though the middle click is, the speed brake slider no longer is mapped and so on. Is there an easy way to just add the button numbers to the keymap? I am confused with the profiler vs in game settings. Can a brother be helped? Thanks!
-
Randomly it will work properly, usually after I pull both controllers and plug them back in. The X-52 is mapped correctly, and the MFD on the throttle shows what is going on. Then just as randomly nearly everything quits working and buttons aren’t recognized etc. Everything is still fine in the profiler. I am confused.
Here is what my MFD gets stuck on. The pinky usually does the deed.
-
Try to decrease the length of the name of the button you set in the software, if its longer than the display can display this thing can happen. I had it too and by decreasing the length I got it sorted.
Cheers
-
Is anyone else having problems with the length of the names? Thanks for the info Fenrir. I am confused how the profiler does not work correctly with another controller plugged in. Newbie alert here. I have used controllers for a long time, but almost never used a profiler, especially when we are talking about shift functions and many axis.
-
I’ve re-abbreviated all the names and mapped things correctly in game and I am good to go. Thanks so much for the settings and the cheat sheets. Invaluable and well laid out. Now just need to get my freetrack 3-point clip built and I’ll be in bu