Solved IVC CLIENT unusuall Issues after 1 months of many check
-
Hello everyone,
Well, I’ve been dragging this problem for more than a month, which has been seen and reviewed with other experienced players.
when i join some players in TE online, capaign too. i can hear everybody and everybody can hear me in 2D MAP (IVC CLIENT VOL UHF ON 6.0, SAME FOR VHF)
IN 3D MAP, i’m the only want who no one can hear me. but i can hear everyother. then my IVC CLIENT VOL UHS IS ON 1.0, SAME FOR VHF
In dogfight team mode that’s work ! (uhf14 - vhf15)
two days ago, in mid-flight, the volume of BMS (I mean the volume of any BMS) decreased. By playing with the commswitchUHF/ commswitchVHF, the volume is back.
Three days ago, Nobody can hear me, then appears, after 20 minutes of flight, it works. after a few seconds, it went down and then nothing according to the other players.
It’s driving me crazy, I’ve done, redone, re re done rerere checked ALL my sound settings, installed/uninstalled BMS. change microphone, and then I’m ready to go spend what I have left to buy a sound card to see if it could solve the problem (I have no problem with my sound card on my motherboard).
Here are some answers to basic questions you might ask me.
-are the volumes open in bms?
YES, the radio is on BOTH, full intercom.-Did I save the DTC and program it correctly?
YES and we went through this with several people to make sure I was doing it right.-Are we on the right frequency?
YES-did I check the IVC SERVER window?
YES and we are on the right frequencies, the ports are correct, the channels are correct, there is a message that is displayed when I use UHF/VHF comms.-Did I check my windows sound settings?
YES it seems correct to me and has been checked by two people who have solved other ivc problems.-Are the frequencies correct on the client IVC?
Yes, and again this has been verified.-Did I update my drivers?
Yes, my Realtek driver is up to date.I’m looking for issues, it goes beyond my skills and it’s other people
If anyone can take the trouble to go through this with me, I would be very grateful.
Thank you.
-
@Vespa I have no idea what the problem will be, but other than what was mentioned in your thread. Have you checked whether your headset microphone works normally in other games? do they hear you in other games? Is the headphone jack input connected correctly, or USB input? Have you tried another USB port if that is the case? your colleagues have accidentally muted you?
I say obvious suggestions but sometimes the goblins play tricks… it’s only to rule out options
-
@Apolo27 yes my headset is correctly connected and the other player don’t mute me
It’s pink jack, Green jack and USB for accessorie lights on the headsetI haven’t touched the BMS INI file either.
-
If you have already reinstalled BMS, I don’t think the problem is with BMS…it sounds more like a problem with your microphone…because if you hear your friends but they don’t hear you, you have other headphones to do sound tests and verify It’s a software problem and not a hardware one.
-
@Apolo27 that’s done there’s a couple of month when i try first time
-
@Apolo27 my headset is totally new from 3 weeks
I reinstalled windows 3 times, and i don’t count for BMS JUST to find an issues -
if you have tried all my suggestions + your suggestions…I don’t know what else it could be…I hope someone with more experience than me can help you…my technical level is not very high
Edit: do they listen to you on discord?
-
@Apolo27 I know it’s really frustrating. the worst is that it worked in Event, then pouff! we had found a solution in my microphone settings (deactivate the noise canceling, amplify the microphone) and from day to the next day it didn’t work anymore or once in a while. I can do a test with another microphone, it will only be the third. + a sound card if it doesn’t work. it’s a bit expensive to worry about technique hahaha without knowing exactly where it comes from.
the ports of my internet box are also programmed as requested in the doc
I turn around.
thank you for trying to help me. I’m really close to asking a dev for help.
-
@Apolo27 yes they listen me on discord , in BMS comms, in bms in 2D not in 3D
-
so we rule out a hardware problem, and if it works with other games, discord etc… it’s an ivc problem… but there my knowledge is zero
-
@Vespa it’s a mystery indeed. Only small thing I can think to add… there are (or were) known bugs with radio volume when switching from internal to external views, and back
So, maybe try a flight and avoid going to any external view?
(Maybe someone else here can confirm, if this is still a bug or not in MP, and what the in-flight workaround is.)
-
@airtex2019
I talked about it on several discord forums including Falcon Lounge and UOAF but without success -
@Vespa Oh goodie I want to be the one to solve your problems. First Check that your windows Sound devices are disabled and that only your headset are enabled. e.g.
Then start up your IVC client and make sure your head set mic and phones are set properly in the IVC client panel. You’re welcome!
-
@Kavelenko WE check this paramétrer too…
-
USB mic is from the webcam and it’s desactivate. i use it for track IR with Opentrack
![0_1693039886512_9703e06a-b808-40e8-8bbd-9a28bfwebcam7522-image.png](Envoi en cours 100%)
-
@Vespa You said you bought a new headset, I dont see that in your screen shots. If you have trouble hearing others because its changing the volume try deselecting enhancements while you are trouble shooting.
You’ve got at least three output devices listed are those. Why are you using a microphone at the rear of your computer? Are you able to just plug in your new headset and test those on their own?
-