Saitek X-52 Profile
-
file here Sven: http://temp-share.com/show/3YgF83rJx
tell me how it went
-
file here Sven: http://temp-share.com/show/3YgF83rJx
tell me how it went
Thx for the fil mate. No go. Loaded your SST profile and then the sim (no pinky assigned) no shift function. Then unloaded the profile, loaded the sim assigned the pinky ingame button 38, save apply ok. Exit the sim loaded the SST profile, loaded the sim - no change. I even tried to assign a key “Delete” to se if that would execute a shift function, but it didn`t.
This is a tuff one to nail down. If use the pinky on joystick in IL2 as bomb relese it
s working (pinky is working as a button), which I also se when it
s assigned. Hmm what now Im out of ideas other than make a shift function in the SST profile, but I cant find that choice/option, when right click pinkie switch.Im open for other ideas
Kind regards
Svend -
Re-Install BMS? Maybe a corrupted file of some sort…I don’t know…a tuff one indeed…
Even yesterday I had to do a full re-install because of a new theater and used same profile and worked great.
If it’s not too bother do a reinstall. Ran out of ideas
**EDIT: LAST TRY: download this http://temp-share.com/show/HKdPE81yA and drop it inside C:\Falcon BMS 4.32\User\Config.
Then load this keystoke file and do not bind anything else. Just load it together with the profile I sent before.
If no go…. then reinstall or bang your head on the keyboard :)**
-
Re-Install BMS? Maybe a corrupted file of some sort…I don’t know…a tuff one indeed…
Even yesterday I had to do a full re-install because of a new theater and used same profile and worked great.
If it’s not too bother do a reinstall. Ran out of ideas
Np to do a reinstall at all, easy done May I ask which theater you installed - my self, I have the Balkan and IT installed. Can a new installed theater make problem like that?
-
Re-Install BMS? Maybe a corrupted file of some sort…I don’t know…a tuff one indeed…
Even yesterday I had to do a full re-install because of a new theater and used same profile and worked great.
If it’s not too bother do a reinstall. Ran out of ideas
**EDIT: LAST TRY: download this http://temp-share.com/show/HKdPE81yA and drop it inside C:\Falcon BMS 4.32\User\Config.
Then load this keystoke file and do not bind anything else. Just load it together with the profile I sent before.
If no go…. then reinstall or bang your head on the keyboard :)**
Thx mate fil downloaded. I wil follow instructions, minus the " bang your head on the keyboard "
For now I will jump into the bathtub and se if anything will change
-
Hey!
I’ve got a problem with a profile. When I load it to Profile Editor I don’t see any changes. All fields are empty like without any profile. Anybody know why? And sorry for my english, I know it’s not best
-
“Unhandled exception has occurred” error from .NET Framework dialogue box when I try to load your profile. Any idea what this means?
-
Getting this one now! Thanks!
-
hey, i did follow everything in the “read me, i dare you” file and followed everything like it is explained in there.
now this isn’t working for me and i think its the .pr0 file, because when i load that file in the control center i don’t see anything in it, accept for the mini mouse and scroll wheel.
i use a X52 (no pro) and hope i didn’t download a x52pro file here? or could i have done something wrong here?
i’m using software version 7.0.27.13 from smart technology.any help would be appriciated.
-
This problem is probably buried in the thread somewhere, but I followed the instructions and I can get most of the functions fine, but when I press the pinky button the only thing that happens is my radar goes ext. I can’t get it to do the shift functions.
Btw, what is the first detent on the trigger supposed to do?
-
Is there a version of this that doesn’t butcher the keyboard mapping? And when I press the pinkey button, nothing happens. How can I make my own version?
-
Edit:
forget my question, it was just me……
After comparing the keyfiles (no TrackIR with TrackIR Version) i understood how it works and find out that the function i was searching for was allready there… -
Hi there, I’ve just bought my X52 1 week ago (not pro) and when I select a profile from profiler it causes me BSOD AND BMS crashes.
Help me please I’m very tired of this! -
IIRC there used to be an issue with Button Names longer than 16 characters. It is supposed to have been fixed but I don’t take the chance just in case.
Edit:
_Note: I needed to add a USB 2.0 PCI card to my “Dell Vostro 430 i7” desktop because of strange MFD communication errors and poor joystick response (lost calibration, etc.) but I never had a BSOD due to the Saitek. I’d guess my issues were due to Dell’s chipset/USB 3.0 implementation (other USB devices seem ok).
I was ready to return the X52 Pro as broken but “luckily” found the intermittent faults disappeared once plugged into another PC._
-
IIRC there used to be an issue with Button Names longer than 16 characters. It is supposed to have been fixed but I don’t take the chance just in case.
Edit:
_Note: I needed to add a USB 2.0 PCI card to my “Dell Vostro 430 i7” desktop because of strange MFD communication errors and poor joystick response (lost calibration, etc.) but I never had a BSOD due to the Saitek. I’d guess my issues were due to Dell’s chipset/USB 3.0 implementation (other USB devices seem ok).
I was ready to return the X52 Pro as broken but “luckily” found the intermittent faults disappeared once plugged into another PC._
I ve almost the same kind of problem, but that leads to ctd or bsod! I’ve the leds off, sometimes they bright up and If I’m manouvering while they do so it looses calibration and make the “0 point” the actual point where the cloche was, but it is impossible to trim as it does that quickly and **** up everything another time.
If I don’t use the SST all is going fine, the problem is that the SST is a must to use the radar cursor. (I don’t have command with more than 10 char in string)
-
It’s been a while since I have ran this sim but on your profile how do you designate a target on the MFD? I can move the cursor but cannot designate it.
Thanks! -
It’s been a while since I have ran this sim but on your profile how do you designate a target on the MFD? I can move the cursor but cannot designate it.
Thanks!The
) you would use TMS Up . -
I have the same problem with the pinkie button not shifting the other buttons properly.
Has anyone else solved this problem?
-
Awesome profile, thank you for making it and sharing with us:-)
-
I have a question, does anybody know how to reprogram the shifted mouse button 1 so it pauses TrackIR instead of reloads TrackIR? Thank you very much for you help