Morphine's Profile
-
Greetings. I have only just recently bought a TMW and have installed your Profile. Only wanted to thank you for such a great job. Kind regards. Jay.
-
Morphine is the Man!!
-
No, Morphine is the Superman! Thanks again!
-
This post is deleted! -
I am a complete newbie to running warthog with BMS.
Can anyone please say the install procedure? Neither the first post, or the download page tells you how to install/use these files…
I’m assuming the .key file goes in here: C:\Falcon BMS 4.32\User\Config
and the
.tmc file gets loaded into target… ?What other things do you need to do?
-
.TMC definately is loaded via TARGET. It’s what changes the nature of your joystick(s) output.
The .key file file controls all non-axis assignments, both keyboard and DX. Placing it in the user\config folder means it will display in the load list from within the game. After the .key is in place, load it once in game setup. Axis mapping is defined by the advanced page of the controls setup so you’ll have to configure that yourself once the TARGET controller is active. Function check the axes in the advanced controllers section (the bars will move) and 4 axes (rudder, X, Y, throttle(s)) at the main controllers screen. Be sure to set your AB detent and idle detent by left/right clicking the SET AB button. Button function check can be accomplished by pressing all buttons in turn on the controller(s) and watching the key list and the feedback text below.
-
Hello everyone,
could you help me once more?I used the profile of “morphine” which is very good …(version 2)
But what I do not understand is that the red Chinese hat on
“range knob” and “strores jett” does not work at all …
I wonder why …
I try to change the command lines in the script but I RINTING that “TARGET” does not accept the L_CTL+F3 and L_CTL+F4 in the Chinese hat (WHY ??…) I can not try anything
( I said I’m on a AZERTY keyboard FR = RANGE KNOB UP= L_CTL+F4 --&-- L_CTL+F3=DOWN and STORES JETT= L_CTL+‘j’ …IMPOSSIBLE TO MAPPING IT like that normaly morphine’s profile is dedied.
Of course I use the fichier.key is given with …So I try to map other keys without using the L_CTL and L_SHIFT …
EX: MapKey(&Throttle, CHB, PULSE+‘k’); and using the profile morphine
Chinese = hat works again.
Why do not they accept the CTL or SHIFT at this place. ?I should add that when I start the game without TARGET profiles and with the original BMS keyboard CTL F3 and F4 keys working again normally.
Is there a conflict between the profile built by morphine that it is pressing in qerty?there must be something I missed because it’s already hard enough like that to assimilate the operation of compiling the script.(sorry)
HELP! pls
-
.TMC definately is loaded via TARGET. It’s what changes the nature of your joystick(s) output.
The .key file file controls all non-axis assignments, both keyboard and DX. Placing it in the user\config folder means it will display in the load list from within the game. After the .key is in place, load it once in game setup. Axis mapping is defined by the advanced page of the controls setup so you’ll have to configure that yourself once the TARGET controller is active. Function check the axes in the advanced controllers section (the bars will move) and 4 axes (rudder, X, Y, throttle(s)) at the main controllers screen. Be sure to set your AB detent and idle detent by left/right clicking the SET AB button. Button function check can be accomplished by pressing all buttons in turn on the controller(s) and watching the key list and the feedback text below.
Thank you very much. I have it setup now and it works 100%.
-
Hello Morphine. How do you handle this files and configurations with an added rudder?
I have my joystick as ID 0 and my throttle as ID 1 . Combined it yields ID 0…. everything works great in BMS as per your profiles. However, as soon as I add a Gamepad (i want to test the axis as a rudder), it is in ID 2 … but when I run BMS the buttons are wrong (joystick buttons act as OSB).
thanks for your help.
-
Are you getting the ID from DXDiag or is it the listing order when you open the Joysticks and Controllers in the Control Panel?
It sounds like the GamePad is displacing the Warthog your primary controller. What other devices do you have (MFDs, other rudders, etc.)?
-
hello.
in DXDIAG the gamepad has ID2 (while TM combined has ID 0, with target off it has joystick 0 and throttle 1).In USB devices in control panel, preffered device is chosen TM combined.
I dont have any other devices. Im worried that If I bouy a set of pedals they will displace my HOTAS, thats why im testing this beforehand.
do you have any more ideas I could use?
thank you for answering. -
I am a complete newbie to running warthog with BMS.
Can anyone please say the install procedure? Neither the first post, or the download page tells you how to install/use these files…
I’m assuming the .key file goes in here: C:\Falcon BMS 4.32\User\Config
and the
.tmc file gets loaded into target… ?What other things do you need to do?
1)install target and open FalconBMS-Warthog.tmc with it. press play in the target software to run the joystick.
2)copy the Warthog_DX.key to your FalconBMS folder
3)run falcon 4 bms, load the Warthog_DX key.
4)map the joysticks in the advanced tab inside the controller configuration in BMS. this mapping is described in the JPGEG Pictures that morphine includes.
5) enjoy! -
hello.
in DXDIAG the gamepad has ID2 (while TM combined has ID 0, with target off it has joystick 0 and throttle 1).In USB devices in control panel, preffered device is chosen TM combined.
I dont have any other devices. Im worried that If I bouy a set of pedals they will displace my HOTAS, thats why im testing this beforehand.
do you have any more ideas I could use?
thank you for answering.BMS uses the controller order as displayed in the Game Controllers Control Panel. So if your Gamepad is listed before the TM Combined that’s how they will appear to BMS. My guess is that you owned, and had plugged in, the Gamepad before you bought the Warthog and that it is now always listed as the first device when it is plugged in. I’ve observed this whenever I’ve reinstalled the OS so I’m always careful to plug in the devices in the order I want them to appear.
However, my guess is if you were to now plug in a new set of rudders like the Saitek Combat Pedals, they would appear after the Warthog and not screw up your controller numbering (assuming the gamepad is not plugged in).
I hope that helps.
-
Hi, I am new to this but I’ve been to Morphines version 2 page and can download all but the .tmc and dx.key
they seem to be greyed out.
Am I doing something wrong
thanks,
Ibis -
@Ibis… Look all the way to the far right next to file names and click the “down arrow” icon.
-
Ahh, sorry Morphine I just downloaded the others from the left hand side and didn’t notice the right hand side arrows.
thanks,
Ibis -
1)install target and open FalconBMS-Warthog.tmc with it. press play in the target software to run the joystick.
2)copy the Warthog_DX.key to your FalconBMS folder
3)run falcon 4 bms, load the Warthog_DX key.
4)map the joysticks in the advanced tab inside the controller configuration in BMS. this mapping is described in the JPGEG Pictures that morphine includes.
5) enjoy!For a newbe with this software I have followed instructions 1&2 above ( correctly I hope) but in 3 how and where do I load the Warthog_DX key if
falcon 4bms is running?
thanks in advance.
Ibis. -
Just out of curiosity, does anyone have the authentic key bindings for the A-10C?? Not to be excessively anal, but I prefer to fly with the real stuff. Thanks in advance.
-
I don’t think the A-10 cockpit systems are fully implemented in BMS therefore it’s somewhat not possible to have a fully “realistic” profile. TBH though I haven’t even tried. To have a realistic A-10, I suggest flying DCS.
-
For a newbe with this software I have followed instructions 1&2 above ( correctly I hope) but in 3 how and where do I load the Warthog_DX key if
falcon 4bms is running?
thanks in advance.
Ibis.Hello.
here is more detailed:1)install target and open FalconBMS-Warthog.tmc with it. press play in the target software to run the joystick. your joystick should be named now THRUSTMASTER COMBINED in windows control panel / usb controller device.
2)copy the Warthog_DX.key to your FalconBMS folder (Falcon BMS 4.32\User\Config)
3)run falcon 4 bms, load the Warthog_DX key by going to SETUP, CONTROLLER, then click LOAD button and select the Warhog_DX.key
4) inside falcon 4 bms setup, select the joystick controller as “thrustmaster combined”. then map the joysticks in the advanced tab inside the controller configuration in BMS. this mapping is described in the JPGEG Pictures that morphine includes (View Control, Flight Control, Avionics Control)
5) set Afterburner by clicking the AB button. Leave the Thorttle in the position before activation of afterburner, then click the button. Repeat for Idle deten but with right click of the AB button.
6) enjoy!