Mud's Profile
-
Yeah the FSSB R3 Warthog is a force sensor mod from spain http://realsimulator.com/html/fssb_r3_warthog.html
But the three listings of the FSSB R3 Warthog is supposed to be there.
I used to get the Warthog working fine in Win 7. Ever since I installed Win 10 am having this problem with your profile.
-
Are you using the old or new version of the TARGET software? I didn’t like the new one at all so I saved the old one on my Google Drive in case you wanna give that a go.
https://drive.google.com/open?id=0BwfZYeE6BsF1NFEtaW0tcThlODg
-
Am using the latest version, I’ll give the old version a try… you never know.
-
No luck, still not working properly.
Guess am just going to have to bind my Warthog commands within Falcon BMS without the Target software.
Thanks for help anyways Mud
Cheers
-
Just to rule out something: did you actually also go into the 3D world to try?
-
Hi, dear members.
I am a newcomer. I have never posted on a forum ever before and totally unfamiliar with it. I am having the same difficulties like many about integrating WARTHOG to BMS 4.33. Is there a step by step wlkthru about this. I could not find it I tried 3-4 different configs but none worked properly and cos I most probably messed with the way it should have been done… Anyways. I am a big enthusiast about FALCON and please guide my way to be up in the sky soon…
O should I buy a COUGAR instead…?
Please show some light…
Thank you in advance.
-
Hi, dear members.
I am a newcomer. I have never posted on a forum ever before and totally unfamiliar with it. I am having the same difficulties like many about integrating WARTHOG to BMS 4.33. Is there a step by step wlkthru about this. I could not find it I tried 3-4 different configs but none worked properly and cos I most probably messed with the way it should have been done… Anyways. I am a big enthusiast about FALCON and please guide my way to be up in the sky soon…
O should I buy a COUGAR instead…?
Please show some light…
Thank you in advance.
BMS minds the order in which the devices are connected so my guess is that the button numbers aren’t matching… Have a look here, post #11 might help you out…
I’m assuming that you’re running the provided target script & loaded up the key-file in Setup>Controllers… -
Unfortunately I have same problem, although in my “C:\Falcon BMS 4.33 U1\User\Config\DeviceSorting.txt” is correct device sorting. I don’t know how to solve it. I already loaded BMS 4.33 - Mud.key in game option, but there aren’t any mapped buttons on stick and buttons on throttle are on different positions than is mentioned in manual.
Please, anyone could you help me fix this situation? Windows 7 64 bit, last drivers + Target sofware.
“C:\Falcon BMS 4.33 U1\User\Config\DeviceSorting.txt”
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Combined”
{076306A3-0000-0000-0000-504944564944} “Saitek Pro Flight Rudder Pedals”
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”
{B351044F-0000-0000-0000-504944564944} “F16 MFD 1”
{B352044F-0000-0000-0000-504944564944} “F16 MFD 2” -
Did you select Thrustmaster combined as controller in BMS?
Also make sure you test in the 3d world.
-
Yes, I selected it. I can try profile in 3D world, that’s something what I didn’t check because I supposed that if profile isn’t working properly in setup will not work in 3D as well. Is very strange that this profile is working well https://sites.google.com/a/hodderweb.com/warthog/falcon-bms/home but because I have MFDs Cougars and your profile is tested for Falcon BMS 4.33 so, I would like to use it.
-
Okay, I have an issue. I’m flying BMS 4.33 U1
I have been flying Mud’s profile forever. I love it.
I have the Warthog suite and used to, until recently, use logitech g-940 pedals.I have replaced the pedals with the Thrustmaster T-rudder.
I see that the T-rudder is showing up in T.A.R.G.E.T. no problem.
I load my Mud configuration same as always in T.A.R.G.E.T., Then fire up BMS.
I go to settings to set up my flight controls and make sure the right axis is assigned as it should. No T-rudder is found.
If I leave BMS, unload the MUD T.A.R.G.E.T. profile, restart BMS and go to settings, the T-rudder controller is seen big as life but I need the T.A.R.G.E.T. mud profile running to get mud running.
If I load the MUD profile in TARGET and the MUD key file in BMS I naturally can’t used my rudders because under MUD they are not “seen” by BMS. Mud works fine.
What am I doing wrong here?
Is MUD not designed to work with TM pedals for some reason?Is this a controller sorting issue?
My devicesorting.txt:
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Combined”
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”
{B351044F-0000-0000-0000-504944564944} “F16 MFD 1”
{B352044F-0000-0000-0000-504944564944} “F16 MFD 2”
{B679044F-0000-0000-0000-504944564944} “T-Rudder”When engaging the TARGET mud profile it returns this:
*** Allocated ProcInstances found from the previous run: use FreeProcInstance() ***
Mapped plugin module “C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll”
Physical USB HID devices managed by script!
Currently plugged USB HID devices[5]:
1: “Joystick - HOTAS Warthog” - “USB\VID_044F&PID_0402&REV_0100”
2: “Throttle - HOTAS Warthog” - “USB\VID_044F&PID_0404&REV_0100”
3: “F16 MFD 1” - “USB\VID_044F&PID_B351&REV_0100”
4: “F16 MFD 2” - “USB\VID_044F&PID_B352&REV_0100”
5: “T-Rudder” - “USB\VID_044F&PID_B679&REV_0110”
USB HID device “Throttle - HOTAS Warthog”(USB\VID_044F&PID_0404\6&3512E6DA&0&3) selected
USB HID device “Joystick - HOTAS Warthog”(USB\VID_044F&PID_0402\6&3512E6DA&0&4) selected
USB HID device “F16 MFD 1”(USB\VID_044F&PID_B351\6&3512E6DA&0&1) selected
USB HID device “F16 MFD 2”(USB\VID_044F&PID_B352\6&3512E6DA&0&2) selected
USB HID device with hardware id “VID_044F&PID_0400” cannot be found
USB HID device with hardware id “VID_044F&PID_B10A” cannot be found
USB HID device with hardware id “VID_044F&PID_B10B” cannot be found
USB HID device with hardware id “VID_044F&PID_B687” cannot be found
USB HID device “T-Rudder”(USB\VID_044F&PID_B679\5&2AB8F5ED&0&1) selected
Virtual HID devices managed by script!
Connecting virtual joystick…Done
Device name set to Thrustmaster Combined
Connecting virtual keyboard…Done
Connecting virtual mouse (absolute axes)…Donemain returned 0
-
SOLVED!
If anyone has the problem here is what you do.
1.Detach your TM pedals from the system. Physically pull the socket out of the USB.
2. Connect all your OTHER TM devices EXCEPT your pedals.
3. Load TARGET.
4. Load the TARGET Mud profile.
5. DO NOT load BMS yet.
6. Connect your pedals.
7. Load BMS.Your pedals will now magically appear in the axis set up menu.
Your Mud controls will 100% work in the cockpit.
Your pedals will work like a charm.
-
SOLVED!
If anyone has the problem here is what you do.
1.Detach your TM pedals from the system. Physically pull the socket out of the USB.
2. Connect all your OTHER TM devices EXCEPT your pedals.
3. Load TARGET.
4. Load the TARGET Mud profile.
5. DO NOT load BMS yet.
6. Connect your pedals.
7. Load BMS.Your pedals will now magically appear in the axis set up menu.
Your Mud controls will 100% work in the cockpit.
Your pedals will work like a charm.
You can edit the script to exclude the pedals from the script, which you are essentially doing by connecting them after running the script.
See post #417 and edit the script to exclude the pedals, it’s the Configure(&TFRPRudder, MODE_EXCLUDED); line that needs added for the pedals.The devicesorting should have Thrustmaster Combined as the top line
If you have the MFD’s, the next line is F16 MFD 1 and the third F16 MFD 2
Then the rudders, everything else can be below those lines{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Combined”
{B351044F-0000-0000-0000-504944564944} “F16 MFD 1”
{B352044F-0000-0000-0000-504944564944} “F16 MFD 2”
{B679044F-0000-0000-0000-504944564944} “T-Rudder”
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog” -
I just upgraded to the Warthog HOTAS from the T1600 HOTAS. After running this profile in the Target script editor and loading the key file, everything works as expected for the Warthog throttle, but the flight stick didn’t have any input working which didn’t seem like a big deal at first as I could manually add it. But when going to Stick controller keys (section 5.11), only three are available, the same ones that only Zenith could see:
No Key Assigned - REM: Trim-Reset (change @ CKPIT)
No Key Assigned - STICK: PINKY/SWITCH (DX SHIFT)
Alt a - STICK: PADDLE SWITCHAnd here is the updated rearranged DeviceSorting.txt file, still not having any luck
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Virtual Game Controller (root)”
{C0F2068E-0000-0000-0000-504944564944} “CH Pro Pedals USB”
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”
{B10A044F-0000-0000-0000-504944564944} “T.16000M”
{B687044F-0000-0000-0000-504944564944} “TWCS Throttle” -
I just upgraded to the Warthog HOTAS from the T1600 HOTAS. After running this profile in the Target script editor and loading the key file, everything works as expected for the Warthog throttle, but the flight stick didn’t have any input working which didn’t seem like a big deal at first as I could manually add it. But when going to Stick controller keys (section 5.11), only three are available, the same ones that only Zenith could see:
No Key Assigned - REM: Trim-Reset (change @ CKPIT)
No Key Assigned - STICK: PINKY/SWITCH (DX SHIFT)
Alt a - STICK: PADDLE SWITCHAnd here is the updated rearranged DeviceSorting.txt file, still not having any luck
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Virtual Game Controller (root)”
{C0F2068E-0000-0000-0000-504944564944} “CH Pro Pedals USB”
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”
{B10A044F-0000-0000-0000-504944564944} “T.16000M”
{B687044F-0000-0000-0000-504944564944} “TWCS Throttle”Please make sure you test in the 3D world with my key file, and not just in the setup of BMS.
-
Haveing trouble downloading profile, it just says that the file is unrecognized?? any ideas? Thanks
-
Haveing trouble downloading profile, it just says that the file is unrecognized?? any ideas? Thanks
The script doesn’t run on Target GUI, it needs to be started from the script editor. Are you using the correct program?
Verstuurd vanaf mijn F5121 met Tapatalk
-
Haveing trouble downloading profile, it just says that the file is unrecognized?? any ideas? Thanks
The files are packed in a Rar archive. You’ll need a program like WinRAR or 7zip to extract them.
-
Hi Mud,
First of all thank you for your profile! i have been using it for the past 4 (Falcon BMS 4.33) months and it’s been working great! I would like to do some modification to it and i need your help:
- I would like to switch the pinky button and the master mode back to their original settings
- I would also like to insert the IDM A-A transmit on the MIC switch up (should be SimCommsSwitchLeft) and IDM A-G FCR transmit on the MIC switch down (should be SimCommsSwitchRight)
Any ideas on how to do that? Will i have to modify the .tmc file and the .key file to get it to work?
Thanks in advance for your help!
-
Hi Mud,
First of all thank you for your profile! i have been using it for the past 4 (Falcon BMS 4.33) months and it’s been working great! I would like to do some modification to it and i need your help:
- I would like to switch the pinky button and the master mode back to their original settings
- I would also like to insert the IDM A-A transmit on the MIC switch up (should be SimCommsSwitchLeft) and IDM A-G FCR transmit on the MIC switch down (should be SimCommsSwitchRight)
Any ideas on how to do that? Will i have to modify the .tmc file and the .key file to get it to work?
Thanks in advance for your help!
Hey,
For you first question you can just change this code:
//************************** //*** TM Warthog Stick *** //************************** //Master mode Button: Cycle FOV MapKey(&Joystick, S1, PULSE+DX3); //Pickle Button MapKey(&Joystick, S2, DX2); //Pinky Button: Missile Step / NWS / AA Disconnect MapKey(&Joystick, S3, DX5);
To:
//************************** //*** TM Warthog Stick *** //************************** //Master mode Button: Cycle FOV MapKey(&Joystick, S3, DX5); //Pickle Button MapKey(&Joystick, S2, DX2); //Pinky Button: Missile Step / NWS / AA Disconnect MapKey(&Joystick, S1, PULSE+DX3);
As for your second question:
Unfortunately I don’t have the time to do that for you now, but you could just change the code for those buttons to give the keyboard command for the SimCommsSwitchLeft and SimCommsSwitchRight.Best regards,
Mud