KEYSPEECH PROFILES- FOR ALL CALLSIGNS!!!!
-
Thanks for your help !
It works very fine now !! My accuracy slider is set on 70. I have 79 % of success, and I hope it will improve with time.
I will buy it without hesitation. It’s an amazing tool and profiles are great !
Very good ! [emoji1][emoji106]
Average accuracy value can help you to adjust accuracy slider value. To see the average : go to Windows taskbar and move the cursor over KeySpeech’s icon and you will see this value in the balloon tip.
-
Yep I read it with your method.
When I would have enough experience with Keyspeech, I will adjust the accuracy slider with the average accuracy value like you said.
Thank you very much for your advice !
-
Thanks for your help !
It works very fine now !! My accuracy slider is set on 70. I have 79 % of success, and I hope it will improve with time.
I will buy it without hesitation. It’s an amazing tool and profiles are great !
I am an above average non native speaker and the highest number that works for me is 92%.
And I only set it so high because it is important to use the highest possible when using keyspeech during online flying to avoid false positives. -
Important note, you must speak as naturally as possible when you train your voice recognition profile. The goal is not to try to pronounce the words with a different accent, but yours. This is true for every software using Windows Recognition Engine.
-
Yes I did trainings with my accent
Keyspeech works very well ! I will do some trainings again to improve recognition.
I have to learn a maximum of phrases, but they are quite intuitive and it’s easy to find the phrase which correspond to the command we want to execute.
Keyspeech is a very good tool and profiles are… wow ! AMAZING job !
-
Can someone help me troubleshoot this? I setup my VA profile, setup keyspeech all profiles load as shown in the tutorials, all settings per tutorial and then when inside Falcon BMS with a flight I do commands and it doesn’t respond at all. Where am I missing a step?! Thank you!
-
Love this Program and thanks for the profile.
cheers
Sting
-
@TeC:
Can someone help me troubleshoot this? I setup my VA profile, setup keyspeech all profiles load as shown in the tutorials, all settings per tutorial and then when inside Falcon BMS with a flight I do commands and it doesn’t respond at all. Where am I missing a step?! Thank you!
Sorry I missed this post.
Hope it’s not too late.
First question,
Does keyspeech work out of bms?
I suggest that:
1-you activate the synthesized voice to check if commands are recognized
2-you use a program like notepad to check that key strokes ate sent by KS.That’s the first step of your troubleshooting.
First we need to assess whether or not KS works in your computer at all.
once we know for sure that speech recognition works, then we can look into bms with detail.
-
Sorry I missed this post.
Hope it’s not too late.
First question,
Does keyspeech work out of bms?
I suggest that:
1-you activate the synthesized voice to check if commands are recognized
2-you use a program like notepad to check that key strokes ate sent by KS.That’s the first step of your troubleshooting.
First we need to assess whether or not KS works in your computer at all.
once we know for sure that speech recognition works, then we can look into bms with detail.
Same kind of problem here. I’ ve been used VAC without probs, but can’t get Keyspeech work. Accuracy is changing while I speak, but no reaction in Notepad or BMS. Your profile is great work with more real commands so I really wanted to get this work. Maybe I have missed some simple step.
Thanks
Samuel
-
May you create another KeySpeech shortcut, and right click on this shortcut, then click on Properties menu item.
Then add -d (space + minus + d) at the end of the path into Target box as show in the image below :
Double click on this shortcut to start KeySpeech, then execute a couple voice command.
Open KeySpeech.log, do you see : Push to talk enabled and Push to talk disabled ?
Thank.
-
Yes, there is “push to talk enabled” and “push to talk disabled” when I talk first time, but when I try second time, there is only “push to talk enabled” and after that no changes in logfile.
There is also long delay in hotkey press as I try it in BMS or in Foxy key test. It keeps key pressed 3-4 seconds after button release. This happens only when Keyspeech is enabled. -
@Metso77 Do you have the same behavior if you run KeySpeech only and using keyboard keys ? What is your OS ? I don’t know if somebody has Foxy here …
Now may you check without command line (-d, default shortcut) and KeySpeech only with Notepad or with Voice Command Tester On.
-
@Metso77 Do you have the same behavior if you run KeySpeech only and using keyboard keys ? What is your OS ? I don’t know if somebody has Foxy here …
Now may you check without command line (-d, default shortcut) and KeySpeech only with Notepad or with Voice Command Tester On.
Yes, same behaviour with keyboard. Hotkey works normally until I’ve talked first time, after that delay occurs. When I exit Keyspeech, behaviour returns normal again.
I’ve programmed Hotas Cougar buttons with Foxy. My OS is WIN7 Home Premium 64bit. -
Yes, same behaviour with keyboard. Hotkey works normally until I’ve talked first time, after that delay occurs. When I exit Keyspeech, behaviour returns normal again.
I’ve programmed Hotas Cougar buttons with Foxy. My OS is WIN7 Home Premium 64bit.May you give me your profile and it occur only with a particular command ? I’ll check. Thank.
-
May you give me your profile and it occur only with a particular command ? I’ll check. Thank.
I’m using jcenzano’s profile from the first post of this thread and haven’t made any changes for it. I’ve used several different commands for testing and result is same.
I don’t think that problem is in profile but between my system and Keyspeech. -
Keyspeech works great……but…
during speaking in Falcon BMS it happens a lot that there is a switchback to desktop because windows speech recognition is acting on commands that steer windows menu’s.
How can i prevent this ???
Thanks allready
-
Keyspeech works great……but…
during speaking in Falcon BMS it happens a lot that there is a switchback to desktop because windows speech recognition is acting on commands that steer windows menu’s.
How can i prevent this ???
Thanks allready
Sorry, but I don’t quite understand what your problem is.
Never happened to me…
Once in a blue moon falcon gets the ESC instead of the SHIFT+ESC and then I get the “resume mission or exit” BMS menu. But I was never sent back to desktop.
Are u using the default key file for BMS?
-
Probably way too late to help P2CFE but he probably still had Windows VR window running while he tried to use Keespeech, and this was running windows UI commands unintentionally.
Another tip for noobs like me (I just now got this running after a bit of frustration) is that I think you need to delete the “_BMS_432_chipi_V2.3.5 STD keyboard-KEYSPEECH-COMMS only.xml” file from your Keespeech ‘Profiles’ folder after you have extracted your .rar folder. I was getting ‘cannot load profile’ messages for a while before trying this.
And lastly a note on the OP: if it is possible to edit this with all the info that has come out through the different versions (eg. profiles DON’T go in the Keespeech install folder anymore, they have their own folder now!) that would be handy for people like me who are a bit slow and lazy but still want to play this amazing sim with all the bells and whistles
Cheers guys!
-
Probably way too late to help P2CFE but he probably still had Windows VR window running while he tried to use Keespeech, and this was running windows UI commands unintentionally.
Another tip for noobs like me (I just now got this running after a bit of frustration) is that I think you need to delete the “_BMS_432_chipi_V2.3.5 STD keyboard-KEYSPEECH-COMMS only.xml” file from your Keespeech ‘Profiles’ folder after you have extracted your .rar folder. I was getting ‘cannot load profile’ messages for a while before trying this.
And lastly a note on the OP: if it is possible to edit this with all the info that has come out through the different versions (eg. profiles DON’T go in the Keespeech install folder anymore, they have their own folder now!) that would be handy for people like me who are a bit slow and lazy but still want to play this amazing sim with all the bells and whistles
Cheers guys!
Thanks for the heads up. I am away from the PC right now.
I will try to update the first post when I get back home.One thing about the “can’t load profile” error message. I can not check it right now, but I think that you get that error message the first time you run keyspeech if the default profile can’t be foundin your profile folder.
Keyspeech always looks for the last profile that was loaded, and it will return this error message if for whatever reason that last profile can’t be found. -
Still downloading 4.33, but it looks like from the manual that at least the ATC menu has new commands, anything else change? I would edit mine by hand but it is 500+ profiles IIRC. Just checking if you planned to update them jcenzano sometime. I figure like the rest of us you want to play with the new release first, no big hurry. But if you aren’t looking to update them, I’ll start the process after I get a little flight time in and see the changes to the radio menus. Thanks for the great profiles!