@SpbGoro Thanks a lot for the quick answer. BTW, great theater!
Best posts made by jojo7401
-
RE: MidEast theater 128 for 4.37 (old)
Latest posts made by jojo7401
-
RE: Upgrading to nvidia 4070ti
@Arty
This is no longer valid. The 4070 TI Super which will be released soon has 16 GB and 256 bit for the same price as the old one. For me it would make this card more interesting as the new 4080. -
RE: Upgrading to nvidia 4070ti
@Iron-Cross
You should go for 4070 TI Super, which is available in 2 weeks. -
RE: What's the best VR for BMS ? Pico 4? Or Meta Quest 2?
@delenda
Very interesting. Can you give me your pc specs, especially the graphic card you are using? Do you have any performance issues? -
RE: Somalia for BMS 4.37
@Scorpion82 Sorry… F16 CM 50 and AGM-65D. I recognized first in campaign but can also reproduce in a created TE.
-
RE: Somalia for BMS 4.37
Hi, after I boresight the Maverick with TGP I am not able to handover from TGP to Maverick seeker. It displays all the time “Handover in progress” and does not finish the handover.
I can reproduce only in Somalia theater, same in KTO works fine.
-
RE: MidEast theater 128 for 4.37 (old)
@SpbGoro Thanks a lot for the quick answer. BTW, great theater!
-
RE: MidEast theater 128 for 4.37 (old)
Can I continue an already started campaign in 1.5.1?
-
Alternative Launcher and POV hat for trim
After hours of investigation I figured out that I need this setting to use trim with the POV hat of my Hotas Warthog:
AFElevatorTrimUp 0 -1 -3 0 0x0 0
AFAileronTrimRight 0 -1 -3 1 0x0 0
AFAileronTrimRight 0 -1 -3 2 0x0 0
AFAileronTrimRight 0 -1 -3 3 0x0 0
AFElevatorTrimDown 0 -1 -3 4 0x0 0
AFAileronTrimLeft 0 -1 -3 5 0x0 0
AFAileronTrimLeft 0 -1 -3 6 0x0 0
AFAileronTrimLeft 0 -1 -3 7 0x0 0I added this section manually to the key file.
Unfortunately, when I start with AL this section is getting overriden by this code:
AFElevatorTrimUp 0 -1 -3 0 0x0 0
SimDoNothing 2 -1 -3 0 0x0 0
SimDoNothing 0 -1 -3 1 0x0 0
SimDoNothing 2 -1 -3 1 0x0 0
SimDoNothing 0 -1 -3 2 0x0 0
SimDoNothing 2 -1 -3 2 0x0 0
SimDoNothing 0 -1 -3 3 0x0 0
SimDoNothing 2 -1 -3 3 0x0 0
AFElevatorTrimDown 0 -1 -3 4 0x0 0
SimDoNothing 2 -1 -3 4 0x0 0
SimDoNothing 0 -1 -3 5 0x0 0
SimDoNothing 2 -1 -3 5 0x0 0
SimDoNothing 0 -1 -3 6 0x0 0
SimDoNothing 2 -1 -3 6 0x0 0
SimDoNothing 0 -1 -3 7 0x0 0
SimDoNothing 2 -1 -3 7 0x0 0I have no idea were it comes from or how I can change in AL in order to get the correct setting.
Can anyone help?
-
RE: Unexpected crash
<p>Definitely no AAA because I were already over friendly territory. But yes, perhaps I forgot Anti-Acing during Ramp Start. I were on high altitute and started already the descent to the airport. Certainly I passed some cloud, but not sure, it was at night time. Never thougth such drastical impacts, I had no chance to react. <br /><br /> </p>
-
Unexpected crash
<p>After a successful mission I were heading home and around 30 miles from my home base suddenly I got a master caution and some seconds later I lost control over the aircraft. First I thought I had a collision but I checked TacView and there was nothing. <br /><br />In the MFL I could see I lost many systems at the same time:<br />[ 21:23] [ 15:45] [SET] [2] [TOF ] [4]<br />[ 61:07] [ 55:28] [SET] [42] [FAULT STORES CONFIG ] [-1]<br />[ 61:14] [ 55:35] [CLEAR] [42] [FAULT STORES CONFIG ] [-1]<br />[ 64:13] [ 58:34] [SET] [5] [FAULT GEAR ] [-1]<br />[ 64:13] [ 58:34] [SET] [231] [FAULT FLCS ] [-1]<br />[ 64:13] [ 58:34] [SET] [117] [BLKR BUS FAIL] [3]<br />[ 64:13] [ 58:34] [SET] [127] [CADC BUS FAIL] [3]<br />[ 64:13] [ 58:34] [SET] [129] [CMDS BUS FAIL] [3]<br />[ 64:13] [ 58:34] [SET] [135] [FCR XMTR FAIL] [94]<br />[ 64:13] [ 58:34] [SET] [185] [RWR LEFT FWD RECIEVER FAIL ] [-1]<br />[ 64:13] [ 58:34] [SET] [186] [RWR RIGHT FWD RECIEVER FAIL ] [-1]<br />[ 64:13] [ 58:34] [SET] [167] [HMCS LBUS FAIL] [3]<br />[ 64:13] [ 58:34] [SET] [16] [FAULT STANDBY GENERATOR HARD ] [-1]<br />[ 64:13] [ 58:34] [SET] [22] [ENG FIRE ] [-1]<br />[ 64:13] [ 58:34] [SET] [226] [FAULT FLCS ] [-1]<br />[ 64:13] [ 58:34] [SET] [146] [MFDS LFWD FAIL] [168]<br />[ 64:13] [ 58:34] [SET] [187] [RWR LEFT AFT RECIEVER FAIL ] [-1]<br />[ 64:13] [ 58:34] [SET] [214] [FAULT FLCS ] [-1]<br />[ 64:13] [ 58:34] [SET] [216] [FAULT FLCS ] [-1]<br />[ 64:13] [ 58:34] [SET] [104] [FLCS ADC FAIL] [13]<br />[ 64:13] [ 58:34] [SET] [219] [BRK PWR DEGR] [84]<br />[ 64:13] [ 58:34] [SET] [101] [FLCS DUAL FAIL] [21]<br />[ 64:13] [ 58:34] [SET] [227] [FAULT FLCS ] [-1]<br />[ 64:13] [ 58:34] [SET] [103] [STBY GAIN] [14]<br />[ 64:13] [ 58:34] [SET] [225] [FLCS AOA WARN] [12]<br />[ 64:13] [ 58:34] [SET] [107] [ISA ALL FAIL] [36]<br />[ 64:13] [ 58:34] [SET] [27] [FAULT FLCS ] [-1]<br />[ 64:13] [ 58:34] [SET] [152] [SMS STA4 DEGR] [106]<br />[ 64:13] [ 58:34] [SET] [161] [SMS STA4 FAIL] [90]<br />[ 64:13] [ 58:34] [SET] [163] [SMS STA6 FAIL] [92]<br />[ 64:37] [ 58:58] [SET] [212] [ENG ] [-1]<br /><br />Any idea what happened? The random failures parameter is not set.<br /><br /><br /></p>