Hello
English version
http://djetdail.fr/falcon/data_falcon/calculettes/falcon_mixte1_eng.php
Bons vols
Hervé
Hi pilots.
I don’t know English, so I use an automatic translator.
I propose you an adaptation of the “tactical reference” and some tools on a web page.
The interface is in french, but I can make an english version if needed.
It’s here >> https://www.djetdail.fr/falcon/falcon_outils.html
Enjoy your visit.
Hervé
Hi
X-plane, BMS, same battle?
Equivalent discussions took place when MSFS2020 and then X-plane 12 were released.
What are the priorities? graphics or flight models/systems management.
I fly with X-plane 12 and Falcon BMS because I like it when a simulator prioritizes flight and onboard systems.
I’d welcome any environmental improvements that would make the mission even more realistic and complex (relief, vegetation, buildings, weather effects and visuals, etc.).
On the other hand, is it necessary to improve the overall terrain to the detriment of performance?
Does the TTBA pilot need to know if the wheat is ready to be harvested?
Hi
I have completed this “Swiss army knife” with
a slope calculator
maps and charts of the different theaters,
direct access to the dash and vault.
the ability to display in a new tab.
I’ll test on a tablet to see if everything is responsive.
Bonnes missions
Hervé
@Growler4135 said in NEW WINWING ICP:
(Except the Warning Reset toggle. I’ll need to look into that.)
hi
to configure the drift c/o, norm and warm reset button:
1 select the -ON line move up to DRIFT C/O and leave it in this position, then save.
2 select the line -NORM move the knob back to NORM and save.
3 select the _WARN RESET line, move the knob down to WARN RESET and KEEP HOLD, then save.
Salut
I’ve modified the menus and added links to two utilities that can be of service to drivers and the leader.
A pad
A whiteboard
I’m thinking of adding the SAM info table (RWR, HARM, ALIC).
Have a good mission.
Hervé
Hello
Preamble: I don’t know English, so I use an automatic translator (deepL).
Thanks Maxk01 , your publication is interesting.
https://forum.falcon-bms.com/topic/23056/how-to-use-midi-controller-as-input?_=1670180198662
To use a MIDI device I use another approach.
The configuration of the joysticks on Falcon BMS is not the easiest and is sensitive to the modification of the connected joysticks.
Recently I acquired a second hand X-Touch mini and have been working on integrating it into my flight simulators (X-plane and Falcon BMS).
The idea was to build a keyboard shortcuts system to not disturb the Falcon BMS configuration.
I found my solution on the X-plane forum where the forum member ‘trijet_arno’ proposes a “universal” solution using Vjoy and FreePIE software. trijet_arno created a script for FreePIE that sets the joystik.
https://forums.x-plane.org/index.php?/files/file/81652-freepie-advanced-script-for-behringer-x-touch-mini/
Vjoy allows to map the MIDI device and to create a virtual joystick.
To create the keyboard shortcuts I use JoyToKey.
To have the virtual joystick present at Windows startup I created a task that launches Vjoy.
I created a bat file that runs :
Bonnes missions
Hervé
Hello.
I have a low-speed ADSL Internet connection.
During multiplayer flights I experience pauses, probably due to the latency of the flow. These pauses being numerous, multiplayer flights are impossible for me.
I read on Max’s site (https://www.falcon-lounge.com/falcon-bms-essentials/guides/network-configuration-for-falcon-bms/)
"set g_bHostDisableP2pForDubiousConnections
If you have set previous setting to 1. You can make sure those clients are not using P2P and connect only to server (might avoid latency issues) "
Should this setting be made only on the server, only on the client, or both?
Another thing: on the client side, I have to set the parameters to 70% (Max’s site) or 80% (Falcon BMS doc) for my upload and download speed in the multiplayer connection window.
To read my speedtest result
Downstream : ~ 4820
Upload: ~520
So that means I have to wait for fiber, it seems to me.
Hervé
J’utilise un traducteur auto.
It works for spacing. cool
For shooting, the AIs probably advance to a distance programmed in BMS.
Can it be modified?
Yes, the spacing is to confuse the SA-20. If there are enough HARMs on different azimuths at the same time, the SA-20 won’t have time to turn these launchers.
It works for spacing. cool
For shooting, the AIs probably advance to a distance programmed in BMS.
Can it be modified?
Yes, the spacing is to confuse the SA-20. If there are enough HARMs on different azimuths at the same time, the SA-20 won’t have time to turn these launchers.
No, it’s an idea, this “kick-out”.
I’ll give it a try.
Thanks
Hi
I am testing to use AIs when the DEAD flight is not complete (human).
No problem to designate the SA-20 fire radar as target to the AI.
I have not found a formation order that moves it laterally several nautical miles away.
The SA-20 has to be fired from quite a distance (70/80 nm), the firing order (HARM) to the AI is not executed immediately
Do you have any ideas, leads or information?
Thanks
Translated with DeepL.com (free version)
@Growler4135 said in NEW WINWING ICP:
(Except the Warning Reset toggle. I’ll need to look into that.)
hi
to configure the drift c/o, norm and warm reset button:
1 select the -ON line move up to DRIFT C/O and leave it in this position, then save.
2 select the line -NORM move the knob back to NORM and save.
3 select the _WARN RESET line, move the knob down to WARN RESET and KEEP HOLD, then save.
OK thanks @VIPER-0
If I summarize what I think I understand.
All clients set their bitrates to 256K
The server is on the default settings:
Download = 2048
Upload = 1024
g_bHostDisableP2pForDubiousConnections 1
As an option and for the pleasure of flying, I create TEs with a minimum of mobile units. I can easily understand that.
Did you set g_bClientServerConnection 1, as @MaxWaldorf indicated?
humor: do you know this sentence (in french) :
“il comprend vite mais il faut lui expliquer longtemps”
“he understands quickly but you have to explain it to him for a long time”
I still have to try with my 4G phone.
Merci
Hi
@VIPER-0 Thanks for your advice.
Do all participants set the bitrate to 256 Kb or only those with low internet speeds?
Modifying the database is more complicated, as each driver has to agree to the modification.
Some of your drivers use their smartphones to connect.
Is there a problem opening ports?
Hervé
Salut
Merci
I’ll give it a try
What’s annoying is that I used to only have this problem when flying multiplayer campaigns.
Now I also have it on TE.
Maybe last night’s was loaded with active units.