@airtex2019 Thank you chief for helping out. All information is well noted.
Posts made by Ernestwinslow
-
RE: Inverted throttle + idle detent not working
-
RE: Inverted throttle + idle detent not working
I have the Virpil CM3 Throttle and I have been battling the issue described here. I cannot fly BMS 4.37 U3 for the time being. Engine management is just uncontrollable. My aircraft will just run away from the taxi position.
I will wait for a fix for this bug.
Thanks to the BMS guys for your work. It is sad I cannot enjoy the new features in BMS 4.47 U3. -
RE: Well done BMS team and MicroProse
Great news indeed. Exciting to see Falcon BMS continues to march on steadily. Congratulations to the talented BMS team and the community at large.
-
RE: Training Manual on kneeboard
@shishkin Would you be kind enouhg to share how you are able to get the training inside the knee board?
Or link to video tutorials on the steps involved.
I cannot seems to get it done with open knee board or ezboards.I fly exclusively vr and want to re-orient myself again after a while not flying bms.
-
RE: Training Manual on kneeboard
@rubbra Great. I would really love to have a readable format of the training manual on the kneeboard. I can see the right hand kneeboard has a number of empty/blank pages in the cockpit
-
RE: Training Manual on kneeboard
@Raiden-0 Thanks. I am looking the WDP up right now I see it is simple to use.
-
RE: Training Manual on kneeboard
@AviationPlus Thank you. I will check that out. Now that VR is implemented, I just want to enjoy the training manual again while doing as much by BMS training manual book.
Edit: Just went to youtube to check for any help and yours popped up first. Nice.
-
Training Manual on kneeboard
Hello all,
Is there a way to load the training manual on the kneeboard just so one can read inside the cockpit while doing the training in VR -
RE: I keep shooting down friendly aircraft.
How do you work the IFF, is there a special pod for that?
Same with the Datalink. Do you need a special pod for that or is it on every F-16 in BMS
Also do the friendly AI, have it or do you have to assign it to the other wings in your flight. And do they have it on by default?The IFF and data link are already installed in the aircraft just like the radar and radio are standard.
Understanding properly how to program the IFF and data link I think it would not be exhaustively covered here. You need to read the section in the bms manual that covers it. Also there are some video tutorials on youtube that explains the new implementation of IFF and datalinkAs for AI, when you lock a friendly aircraft, you would hear him or her call out ‘Buddy Spike’. That would tell you he is friend.
This is from a seasoned and well known author in falcon bmsAnother good video is this
.Just move to the IFF section of the video.
Hope this helps -
RE: So what with DX11 support?
There are credible hint here that VR implementation is one of the many things that will come with the directx 11 support. However it is a long way off. I believe the team is laying the foundation for all these future improvements graphically.
BMS Falcon 4 in VR will be super.
Yes, the developers does really deserve kudos for their hardwork.
It is not easy managing and improving those old codes. -
RE: My BMS 4.35 Impression.
I assure you that the BMS team does it’s best to bring VR to life.
Many thanks to the BMS team for all the hard work.
-
RE: BMS 4.35 trailer
A big thank you to all involved.
The DX 11 implementation I believe would bring in development in the graphic/3D side of the sim.
VR rendering perhaps. This would be awesome.Seasons greetings to all.
-
RE: T.Flight Hotas X
Please consider me the newest sort of beginner. I have tried Falcon 4.0 and basically never got beyond the installation. I always bog down in configuring the buttons on my controller. Can some one give me the basic and most useful key binding for this 12 button system. I don’t know beans about key files so if you mention those you will need to walk me through them. For example:
1=trigger
2=toggle landing gear up and down
3=switch button (if applicable)
4=air brake toggleand so on up to 12.
I know that this is really really basic and far beneath the experts on this forum and community, but it would really help me. Thank you.
https://www.benchmarksims.org/forum/showthread.php?p=443803
Falcon BMS Alternative Launcher application provides a very user friendly and easy way to setup you controls in BMS.
It also enables you to use shift functionality for your hotas.
You can download the application and try it out. -
RE: No planes show up on radar
Have you tried moving the radar elevation to focus the radar beam at the altitude the contacts are?
-
RE: Beware of win10 2004 release.
I think it is a case of different experiences for all users.
Windows 10 2004 update is been good on both bms 4.34 and dcs for me. No issues here. -
RE: F-18 Ramp Start Problem
Hi there,
I followed all steps trying to ramp start the F-18 but fail, the engine just never spool. After starting JFS, waiting for 25% rpm, throttle to 20%, push trigger detent the engine just stays firm at 25% rpm, the fuel gauge 00000, engine temp 0000 and nothing happens. Is it a bug? anybody please help!
Did you crank the engine. Switch behind the JFS switch to right or left engine?
-
RE: Is the a way to "Reset" the T-ILS page scratch pad?
I think for the cursor remaining at old position when you return to T-ILS page could be hard coded. Have no idea how that maybe set to go back to first position of the scratchpad.
Perhaps someone who know better will come along.
I would just use dcs control down voice command to move the cursor where I want between tacan channel/band, cmd strg, and CRS pads after which I just input my values. -
RE: Is the a way to "Reset" the T-ILS page scratch pad?
Oh I get it.
In my experience with that profile, the cursor default to the input section on the DED scratchpad where you enter radio frequency or channel preset by default.
Without voice attack, depressing com1 or com2 defaults to same point.
I would use the dcs switch down to move the cursor. -
RE: Is the a way to "Reset" the T-ILS page scratch pad?
I am trying to create a Voice Attack profile to change/set ILS channel and course.
I know how to set it but the sequence for it depends on the position of the cursor in the T-ILS page on the DED.
This position of the cursor stays in the last page position and i would like to reset it to a knows position so that the actions to change the ILS course/frequency will always be the same.e.g.
for frequency i simply enter the frequency and press enter
for ILS course i press DCS right & DCS down & enter the numberCurrently, since the position of the cursor is not knows this may vary.
Hey,
To move the cursor around, you would need to program voice command in your created voice profile for the DED panel like dcs up, dcs down, return, sequence, enter etc.
Check out this linked video though application is on some other flightsim