@Seifer That’s amazing. Thank you for the fix, and thank you for the fix report, very interesting
Posts made by Newick
-
RE: 4.37 CTD after several minutes
-
RE: 4.36 Screenshots
First flight in KTO Tiger Spirit campaign, RTB after a successful DEAD mission. Thanks for BMS 4.36 !
-
RE: CTD with error 0xc0000005
and your hardware configuration is?
Resolution?
Monitors?
Campaign?
TE?
Any modifications installed?
Any other programs running in the background?Hi Arty,
My hardware config is Ryzen 2700X, Motherboard ASUS X470 pro, 32Gb RAM, Win10 installed on a 110Go SSD, BMS installed on a 1To NVMe SSd, 1080Ti Zotiac. Resolution 3440x1440 and 1024*768 (for 2MFD).
Crash happened in TvT, campaign in MP, campaign in solo and TE… (Korea and Korea TvT)
Other apps running : TrackIR, TARGET and discord.
The only mod installed is the NVGmask by Van.
thx -
CTD with error 0xc0000005
Hello,
since I installed the BMS 4.35, I’ve experienced randomly some CTD without crash dump. I’ve looked into the Win10 log event and found an error with exception code 0xc0000005
I did some research and one solution was to reset Win10. I did that, reinstalled BMS, but, unfortunately, it didn’t solve the problem. It appears whatever the theater is, and without any mod.
I wonder :
1/ if anyone experienced that problem or am I the only one ?
2/ does someone has a clue to solve it (or at least an idea where it can come from) ?Cheers
Newick
-
CTD in TvT, weapons reloaded
Hi,
I’ve experienced today a CTD while RTB after an AI mission in the TvT. Unfortunately, no crash dump was created. The win10 event log shows an Error 0xc0000005, that I have already seen before with Falcon BMS. I tried different system checks but it doesn’t appear to have solved the problem.
Anyway, I restarted BMS and came back into the cockpit and, surprise, my plane was fully reloaded (only weapons, not fuel) ! So, I think there might be a bug there, but not sure how reproducible it is (I will do some tests).Cheers.
-
RE: [CTD in MP]
@shawn : I got CTD, not my client.
@I-hawk Okay, can it be due to Janhas’ models I installed ?
@Seifer : I haven’t got another crash of that type since then. -
[CTD in MP]
Dear developers,
today we wanted to test our SEAD capabilities against SA-10 and I experimented a CTD during the ramp. I was the host with another player connected.
You’ll find below the links to the .txt and DMP files..txt file :
DMP fileHope that’ll help, and, again, thank you very much for this sim (I can’t say it enough :D)
-
RE: BMS 4.35 Screenshots
Take-off while Patriot missiles are defending against SU-30s
Multiplayer training : AAR and formation :
…and formation landing :
KTO, JanHas’ models
-
CTD after SEAD/DEAD
Hi everybody, and thanks for this amazing update ! I won at least 50% FPS (!).
Nevertheless, I just experienced a crash to desktop just before landing after a successful DEAD mission, first of my new Tiger Spirit campaign.
I specify the mission type because the log is about HARM… My wingman and I successfully destroyed two Fan Song with four HARMs and were about to land at Haeju.
I didn’t record the mission and can’t provide ACMI.
You’ll find the crash log attached, and a link to the DMP file below.
Hope that’ll help.
Cheers
Crash logDMP file
https://cloud.aquilenet.fr/index.php/s/Bzq9ZWpNYsNaHCt -
RE: BMS 4.35 Screenshots
First screenshots of U1, with a beautiful sunset in flight for an AI missino over Korea…
-
Taxiway problem at Haeju
Hi all,
I am doing the Tiger Spirit campaign and I wanted to fly a Barcap from Haeju. Unfortunately, I can’t go to the runway as my plane goes below the ground level during taxiway… and explode. The taxiway is Charlie for the RWY 30
I provide here ACMI and screenshot below has been made just before the crash, which happens at texture change. -
RE: CBUs 104/105 not working ?
Is that correct that the BA is actually height AGL ? (If not, I did it wrong)
Envoyé de mon SM-G900F en utilisant Tapatalk
-
CBUs 104/105 not working ?
Hello,
I’m doing the first campaign of KTO and facing a little problem : I can’t get the CBUs working properly : the burst altitude does not seem to work correctly. You’ll find below a link to a VHS file with a drop of CBU 105, set with a BA at 1200, AD 6.00s, Atk AZ 340. Release is done at T+01:00 and impact happens at T+01:53 without any damage to the vehicles around. I made other attempts with CBU 104, with the same problem.
I may have done something wrong, but I can’t see what.Cheers,
Newick
-
RE: Low FPS
Thanks Discodan, I gained +10fps and it’s far better.
And thank you Arty for your clear explanation. Unfortunately I didn’t manage to have CPU stability @4.2 GHz (need more time for tuning…). -
Low FPS
Hi everyone,
first of all, dear devs, thanks a lot for this new version. I have a lot of fun with SEAD/DEAD missions !
Meanwhile, I noticed that at the airport at the beginning of missions with a lot of AC, my fps is low : SIM is 30 max while REN is 45-50.
I tried to modify several graphic parameters (AA, triple buffering, v-sync) without success.
Does that mean that my CPU is the bottleneck ?My config :
MB ASUS X470-Pro, CUP AMD Ryzen 7 2700X GPU 1080 TiCheers
PS: no pb while flying, always good FPS, but still a difference of ~20 between SIM and REN.
-
RE: CTD during mission
Tank you and sorry for the mistake. I posted it in the right section.
-
Crash to desktop
Hello everybody,
I first posted this report on the Technical support part but it appears should be there.I am running my first campaign in the Balkans’ theater and I am at the end of the 2nd day. I want to do a strike mission but at some point the soft always crashes to desktop when I am in 3D, whatever I do. In 2D there is no problem.
I am flying the as Banshee 1-1, pack 1297 and it crashes at day 3 00:43:00 Falcon Time.
Here is the .cam file :
https://framadrop.org/r/dKpimPcvmT#Py6pBVrUhV1pdRqWVmscnigrC5qVZzLlmxFZDxQ70ms=And here is my crash log :
Do you have any idea of what’s happening ?
Thanks.
Newick
NB : I did a fresh install of 4.34U2 with add-on Balkans only and the bug is still there
Edit : edited link for .cam file