Falcon MFD Software for android tablets
-
All the keys in my server software (the ones I want any way) are white in my server software, but the game doesn’t respond to my tablet being pressed. What could be the cause of this?
I have a keyfile that works. It is one that I used in 4.32. Let me know if you need it…just PM with email address.
-
Anyone know if there is an easy way to change the defaults within the MFD server. For example, setting the refresh rate default to a different number and altering the IP address so it does not have to be changed every time?
-
Unfortunately, this information is kept in android tablets.
If you just update FalconMFD-2 your data should not change
But if you uninstall first you will lose settings. -
Thanks for the reply. It was more so to set up defaults that always revert back after shutting down the program and restarting the MFD server. The refresh rate always reverts back to 100 and the client IP always goes to a different number than was is set when you previously run the program.
-
Thanks for the reply. It was more so to set up defaults that always revert back after shutting down the program and restarting the MFD server. The refresh rate always reverts back to 100 and the client IP always goes to a different number than was is set when you previously run the program.
it should not be
let me check my codes again
Is this situation going on each time the program start -
Thanks for the reply. It was more so to set up defaults that always revert back after shutting down the program and restarting the MFD server. The refresh rate always reverts back to 100 and the client IP always goes to a different number than was is set when you previously run the program.
Just to make sure, are you saving your settings after making your changes in the APK?
-
I always thought one had to uninstall the old android apk before installing the new one?
I only lose my settings when I uninstall / re-install, but that’s no biggie.
Cheers, Uwe
-
Just to make sure, are you saving your settings after making your changes in the APK?
Yes. But just to clarify, it’s not the tablet app that I am having the issue with. The issue is with the refresh rate and the IP address that are on the UI on the server on the desktop computer. Those always revert back to the default IP address and the default refresh rate of 100. I do not see a “save” option on the desktop program. Perhaps I am missing it? The tablet app keeps the saved IP of the server just fine.
-
Yes. But just to clarify, it’s not the tablet app that I am having the issue with. The issue is with the refresh rate and the IP address that are on the UI on the server on the desktop computer. Those always revert back to the default IP address and the default refresh rate of 100. I do not see a “save” option on the desktop program. Perhaps I am missing it? The tablet app keeps the saved IP of the server just fine.
Roger - You must have a special setup as to why you need to change the default IP address on the Server. Please explain a little bit more as it may help the developer understand your needs.
-
Roger - You must have a special setup as to why you need to change the default IP address on the Server. Please explain a little bit more as it may help the developer understand your needs.
No nothing special. PC is connected to router via cable. Tablet is connected by wifi. Both are set under a static IP. Tablet will save entered IP. Desktop PC reverts back to default program IP after shitting software down and restarting.
-
Desktop PC reverts back to default program IP after shitting software down and restarting.
Maybe a plunger is in order?
-
if we are talking those values
Dont care about them.
Because those values are for testing.You just know Local IP value
-
Hello, thanks for the app, but unfortunately it didn’t work for me.
I have two kind of problems:- No images are shown on my android Device
2)When i press a key, nothing happens in the SIM, in the incoming msg list box on the left i can see this message for every key i press on the Android device: (Simxxxx) key does not match
Anyway when i load my key file (standard bms keyfile with only joystick changed)i see many yellow keys, but the ones i need are white, but also in this case the same message appears
I have tried also to disable windows firewall but nothing changed, in the testing part i have put the android device ip address and i see unable to connect, but i am absolutely sure that the ip is correct. In the APP on android ip settings are correct redarding ip address. I have my pc connected via ethernet and the device via wifi to the same network.
Falcon configuration (cfg file) is good becouse falcon msd extractor and gigurra GPT works good (both on local and on another lan pc).
What could be the problem?Where i am wrong?
Thanks
Then i have a little feature request: if you could add an option to change client ip address in the android app, because for example i tried the app on a windows tablet, with emulated android via amiduos. Amiduos uses two adapters one bridged and one NAT but in your app you cannot select which network to connect if the device has more then one adapter
- No images are shown on my android Device
-
Hello, thanks for the app, but unfortunately it didn’t work for me.
I have two kind of problems:- No images are shown on my android Device
2)When i press a key, nothing happens in the SIM, in the incoming msg list box on the left i can see this message for every key i press on the Android device: (Simxxxx) key does not match
Anyway when i load my key file (standard bms keyfile with only joystick changed)i see many yellow keys, but the ones i need are white, but also in this case the same message appears
I have tried also to disable windows firewall but nothing changed, in the testing part i have put the android device ip address and i see unable to connect, but i am absolutely sure that the ip is correct. In the APP on android ip settings are correct redarding ip address. I have my pc connected via ethernet and the device via wifi to the same network.
Falcon configuration (cfg file) is good becouse falcon msd extractor and gigurra GPT works good (both on local and on another lan pc).
What could be the problem?Where i am wrong?
Thanks
Then i have a little feature request: if you could add an option to change client ip address in the android app, because for example i tried the app on a windows tablet, with emulated android via amiduos. Amiduos uses two adapters one bridged and one NAT but in your app you cannot select which network to connect if the device has more then one adapter
1. Did you change “exporttexture” from 0 to 1 as described on the MFD picture on the Server?
2. Do not touch anything in the Testing Part…not necessary.
3. Be sure to change the IP address in the Apk to match the IP address on the Server. Always save your settings…close the Apk and open again.
4. PM me your email address so that I can send you a keyfile that works. - No images are shown on my android Device
-
1. Did you change “exporttexture” from 0 to 1 as described on the MFD picture on the Server?
2. Do not touch anything in the Testing Part…not necessary.
3. Be sure to change the IP address in the Apk to match the IP address on the Server. Always save your settings…close the Apk and open again.
4. PM me your email address so that I can send you a keyfile that works.1)yes
2)ok
3)did this a lot of times
4)ok -
-
thanks. Tomorrow i’ll try and will let you know
-
if we are talking those values
Dont care about them.
Because those values are for testing.You just know Local IP value
Oh, well, okay. I didn’t think it seemed to work unless I entered in an IP address in there.
And I actually thought that the refresh rate made a difference when I tested some different levels while running Falcon. Maybe that was just in my head.
-
I assume this works over wifi since u use the IP address. Would it be possible to use tablet USB cable to PC directly?
Would this not reduce any lag? Haven’t tested it yet, just an open question. -
I assume this works over wifi since u use the IP address. Would it be possible to use tablet USB cable to PC directly?
Would this not reduce any lag? Haven’t tested it yet, just an open question.unfortunatelly
i can not do (it is harder than)