Falcon MFD Software for android tablets
-
Roger - You must have a special setup as to why you need to change the default IP address on the Server. Please explain a little bit more as it may help the developer understand your needs.
No nothing special. PC is connected to router via cable. Tablet is connected by wifi. Both are set under a static IP. Tablet will save entered IP. Desktop PC reverts back to default program IP after shitting software down and restarting.
-
Desktop PC reverts back to default program IP after shitting software down and restarting.
Maybe a plunger is in order?
-
if we are talking those values
Dont care about them.
Because those values are for testing.You just know Local IP value
-
Hello, thanks for the app, but unfortunately it didn’t work for me.
I have two kind of problems:- No images are shown on my android Device
2)When i press a key, nothing happens in the SIM, in the incoming msg list box on the left i can see this message for every key i press on the Android device: (Simxxxx) key does not match
Anyway when i load my key file (standard bms keyfile with only joystick changed)i see many yellow keys, but the ones i need are white, but also in this case the same message appears
I have tried also to disable windows firewall but nothing changed, in the testing part i have put the android device ip address and i see unable to connect, but i am absolutely sure that the ip is correct. In the APP on android ip settings are correct redarding ip address. I have my pc connected via ethernet and the device via wifi to the same network.
Falcon configuration (cfg file) is good becouse falcon msd extractor and gigurra GPT works good (both on local and on another lan pc).
What could be the problem?Where i am wrong?
Thanks
Then i have a little feature request: if you could add an option to change client ip address in the android app, because for example i tried the app on a windows tablet, with emulated android via amiduos. Amiduos uses two adapters one bridged and one NAT but in your app you cannot select which network to connect if the device has more then one adapter
- No images are shown on my android Device
-
Hello, thanks for the app, but unfortunately it didn’t work for me.
I have two kind of problems:- No images are shown on my android Device
2)When i press a key, nothing happens in the SIM, in the incoming msg list box on the left i can see this message for every key i press on the Android device: (Simxxxx) key does not match
Anyway when i load my key file (standard bms keyfile with only joystick changed)i see many yellow keys, but the ones i need are white, but also in this case the same message appears
I have tried also to disable windows firewall but nothing changed, in the testing part i have put the android device ip address and i see unable to connect, but i am absolutely sure that the ip is correct. In the APP on android ip settings are correct redarding ip address. I have my pc connected via ethernet and the device via wifi to the same network.
Falcon configuration (cfg file) is good becouse falcon msd extractor and gigurra GPT works good (both on local and on another lan pc).
What could be the problem?Where i am wrong?
Thanks
Then i have a little feature request: if you could add an option to change client ip address in the android app, because for example i tried the app on a windows tablet, with emulated android via amiduos. Amiduos uses two adapters one bridged and one NAT but in your app you cannot select which network to connect if the device has more then one adapter
1. Did you change “exporttexture” from 0 to 1 as described on the MFD picture on the Server?
2. Do not touch anything in the Testing Part…not necessary.
3. Be sure to change the IP address in the Apk to match the IP address on the Server. Always save your settings…close the Apk and open again.
4. PM me your email address so that I can send you a keyfile that works. - No images are shown on my android Device
-
1. Did you change “exporttexture” from 0 to 1 as described on the MFD picture on the Server?
2. Do not touch anything in the Testing Part…not necessary.
3. Be sure to change the IP address in the Apk to match the IP address on the Server. Always save your settings…close the Apk and open again.
4. PM me your email address so that I can send you a keyfile that works.1)yes
2)ok
3)did this a lot of times
4)ok -
-
thanks. Tomorrow i’ll try and will let you know
-
if we are talking those values
Dont care about them.
Because those values are for testing.You just know Local IP value
Oh, well, okay. I didn’t think it seemed to work unless I entered in an IP address in there.
And I actually thought that the refresh rate made a difference when I tested some different levels while running Falcon. Maybe that was just in my head.
-
I assume this works over wifi since u use the IP address. Would it be possible to use tablet USB cable to PC directly?
Would this not reduce any lag? Haven’t tested it yet, just an open question. -
I assume this works over wifi since u use the IP address. Would it be possible to use tablet USB cable to PC directly?
Would this not reduce any lag? Haven’t tested it yet, just an open question.unfortunatelly
i can not do (it is harder than) -
If i load my Keyfile into MFD server have a error message:
The Index is out of range Parametername: index ??
what that mean with negative index?
-
If i load my Keyfile into MFD server have a error message:
The Index is out of range Parametername: index ??
what that mean with negative index?
can you send me your key file to me
-
If i load my Keyfile into MFD server have a error message:
The Index is out of range Parametername: index ??
what that mean with negative index?
can you send me your key file to me
-
i found problem
i will publish new version on nightGood Flight
-
ok, Thanks for your help !
regards
Dave
-
Hello komurcu !
Any news from the update?
regards
-
I published new version of server
to fix some bugsFalconMFD Server-2 (For PC)
Download FalconMFDServer-2 (Ver 3.3.0.1) -
I am having a few issues.
1. The ICP buttons do not work. (I do have a numerical keyboard and remapped the ICP controls to work with it. Is that causing a conflict?
2. I have this program running on 2 tablets. There is no way to get a single MFD on each tablet. Is there a way to get the left MFD to play on 1 tablet while the right MFD is on the other?
-
I am having a few issues.
1. The ICP buttons do not work. (I do have a numerical keyboard and remapped the ICP controls to work with it. Is that causing a conflict?
2. I have this program running on 2 tablets. There is no way to get a single MFD on each tablet. Is there a way to get the left MFD to play on 1 tablet while the right MFD is on the other?
At the moment, I do not belive so. I can send you my keyfile when I return from vacation. I use two tablets. PM your email address.
Dracfalcon via downtime Playa Del Carmen, Mexico