X55 keyfile -BMS -Full DX Programmed
-
Hi to all and sorry for my bad english, only one question……why i cannot retrieve the download link to the pakage?
Thanks in advance
Gabriele -
Download link in first post has been updated.
-
This post is deleted! -
if you take the provided keyfile from this thread, add this first line
#joysticks|Saitek Pro Flight X-55 Rhino Stick|Saitek Pro Flight X-55 Rhino Throttle
the little app automatically re-maps the buttons based on where your position of those two sticks are (assuming the original poster has this layout.
ymmv
-
the switches on the throttle control the OSB buttons and not the landing gear,CAT, etc as per drawing
using X55-BMS4.33-Snelle-V2.00
thanks
-
the switches on the throttle control the OSB buttons and not the landing gear,CAT, etc as per drawing
using X55-BMS4.33-Snelle-V2.00
thanks
It would help if you just could be a little more explainatory on the subject.
First: Perhaps you checked functionality in UI? Doing so not all functions will be visible, in SIM however they do function as advertised.
Second: Clear any active Saitek profile prior to BMS start, i.e. apart from the one in package (slider).FYI:
IF YOU SAVE THE KEYFILE IN THE BMS SETUP UI, YOU WILL LOOSE
ALL COMMENTS AND THE ORDER OF THIS FILE! SO ALWAYS KEEP A
BACKUP OF THIS FILE FOR FUTURE REFERENCE!
Bottom line: do not save the keyfile in UI.
-
Thanks for replying.
On the throttle there is toggle switches they are mapped for some reason to control the buttons around the mfd`s and not what the diagram shows eg landing gear up etc etc.
Also how is the best way to save changes if not ingame.
I would never be able to use the key file and cchange things in that i am only smart enough to click what i want to change in the game and then press the buttton i want it mapped to lolThanks again
-
The Key G (press+shift) is programmed as snowplow/reset which refers to an OSB, further no OSB at all.
Did you download package from first post in this threat?
Did you load the Keyfile in UI?
What excact buttons do you press and what is the response in BMS UI ?, just a few examples will do.
What changes do you want to save? The keyfile is DX programmed, so open in it up and look at the bottom section and use keyfile manual and callbacks as reference if you want to make changes for yourself.
You underestimate yourself, just do understand it and make it work the way you want it, a bit of reading helps. -
Updated the readme.docx, downloadable now in first threat per seperate download option.
Added:- Extended instructions
- HELP: Controller id’s swapped
- Renumber DX assignments: manually
- General Process to Ensure Clean Installation Saitek’s
-
my brain hurts
I am trying to get some thing to work
I have TRACKIR and I want to assign the button to recenter it.
I was looking at using the button that is used to close the air brakes
AFBrakes Close
But I want to use it on a shifted function so I dont actually loose the air brakes function if that makes sense?
-
Shifted slider is not possible. You could use F12 for TIR.
Are your previous issues solved? -
Wow fast reply thanks
My previus issues seem to be solved yep
Sorry the AFBrakes is not the slider its the buttons on the throttle :).
I know I could use the slider but I like not having to use the saitek software thats why I love this profile -
This post is deleted! -
hmmm I might have to use the saitek software then?
I know it was possible on the X52 as I used a profile that did it but yes that was using the saitek profiler software.I also would like to use the slider on the throttle for zoom.
Looks like I have a bit more reading and stuff to do LOL
-
I was wrong. There is a functioncall RecenterTrackIR,you can look it up in the keyfile manual (case sensitive).
How to put this on button 5 of throttle as shifted?
Open up keyfile with notepad, go to bottom, got to section THROTTLE SHIFTED DEVICE#2, copy next line
RecenterTrackIR 292 -1 -2 0 0x0 0 “center TIR” “BUT.5”
save
reload keyfile in BMS
Be happy
TIR can be used for zoom/ FOV via mousewheel. -
I was wrong. There is a functioncall RecenterTrackIR,you can look it up in the keyfile manual (case sensitive).
How to put this on button 5 of throttle as shifted?
Open up keyfile with notepad, go to bottom, got to section THROTTLE SHIFTED DEVICE#2, copy next line
RecenterTrackIR 292 -1 -2 0 0x0 0 “center TIR” “BUT.5”
save
reload keyfile in BMS
Be happy
TIR can be used for zoom/ FOV via mousewheel.Yessss it worked thank you so so much for taking the time to help me
Thanks so much
-
This post is deleted! -
There is only one slider and that is not a DX accessible button, just a single press/release and only programmable via Saitek profilers SST. Why? don’t ask me.
I use zoom with TIR, it did function like that since ever, look in setup. Enable 3d cockpit, trackir vector, z-axis, turn z-axis on in TIR!
Glad to see RecenterTrackir working for you. -
This post is deleted! -
Thanks snelle your awesome
Now time to blow stuff up