-Ice's Falcon BMS Helios Profile Updated!
-
No, the Helios screen remains divided in the 3d world and in the UI screen.
Pika out -
No, the Helios screen remains divided in the 3d world and in the UI screen.
Puka outSometimes there might be incompatibility between the profile creator’s screens setup (number of screens ,arrangement, resolutions) and the other user’s screens setup.
In this case a monitors reset is required.
To accomplish this:- Load the profile with profile editor.
- In the main menu under profile select reset monitors.
- A new window pops up where you may control some parameters of the reset process.
Not always necessary to modify them, the defaults might work well. - When done click there OK.
- Review the profile with the profile editor and if pleased save it (under new name probably just in case of…)
Hope this helps.
-
Thanks a lot dcraig1,
I did encounter this problem initially and I solved it by doing a monitor reset. Otherwise the profile does not load.
Anyways, I have concluded that it may be related to my integrated video card. I believe I am asking a lot of it. I’m going to start flying in window mode anyways.
I think I am pushing my luck, I already got my wish to have a separate cockpit with a Helios touch screen.
Pika out -
Sorry Ice forgot about that one.
There is a nice PDF in \Falcon BMS 4.33\Docs\Key Files & Input\Keyboard Layout Files.
Thank you for your time. -
1. I may be dumb and blind but I can’t find -Ice’s rpfile anywhere; even http://www.gadrocsworkshop.com/downloads/14
2. If I have a touchscreen laptop and an android tablet separate from my PC (tablet on network though), can I still use Helios and profiles. If not then what would be preferred programme?
-
1. I may be dumb and blind but I can’t find -Ice’s rpfile anywhere; even http://www.gadrocsworkshop.com/downloads/14
2. If I have a touchscreen laptop and an android tablet separate from my PC (tablet on network though), can I still use Helios and profiles. If not then what would be preferred programme?
My profile is linked to a “blog page” and you’ll find the link for that on the first post of this thread
You can use your laptop and it’s touchscreen monitor with Helios, yes, but you’ll need another program in order to “network” Helios/MFDE/exports into your laptop and back to your PC. The one I know of is GiGurra’s GPT program but I have no experience with it unfortunately. Good luck!
Sorry Ice forgot about that one.
There is a nice PDF in \Falcon BMS 4.33\Docs\Key Files & Input\Keyboard Layout Files.
Thank you for your time.Hello Talisker, can you give me a control that doesn’t work for you when using my .key file??
Thanks a lot dcraig1,
I did encounter this problem initially and I solved it by doing a monitor reset. Otherwise the profile does not load.
Anyways, I have concluded that it may be related to my integrated video card. I believe I am asking a lot of it. I’m going to start flying in window mode anyways.
I think I am pushing my luck, I already got my wish to have a separate cockpit with a Helios touch screen.
Pika outHow exactly is your setup plugged in? Main monitor on your GPU and your Helios monitor on the integrated GPU? I was thinking of trying this on my setup, to alleviate the load a bit from my GPU and see if it’ll give me better numbers. What motherboard and GPU are you using?
-
My profile is linked to a “blog page” and you’ll find the link for that on the first post of this thread
You can use your laptop and it’s touchscreen monitor with Helios, yes, but you’ll need another program in order to “network” Helios/MFDE/exports into your laptop and back to your PC. The one I know of is GiGurra’s GPT program but I have no experience with it unfortunately. Good luck!
Thanks got it!
Re GiGurra, I am about to try “spacedesk” https://www.google.com/search?q=spacedesk&ie=utf-8&oe=utf-8 to see if that works.
While I was searching I also found this which may be interesting. https://www.google.com/search?q=spacedesk&ie=utf-8&oe=utf-8#q=mouse+without+borders+setup
-
Glad to have helped!
I have seen that or a similar program before but never looked deeper into it as I’ve no need for it. Give it a try though and see if it helps in this “unique” situation!!
-
Hello Ice,
Here’s my set up:
My Rig:
Lenovo X230 Tablet Touch screen
Dockstation
Dell Monitor 2707WFP
Intel Core i7-3520 CPU, 2.90GHz
RAM: 6.00GB
500 GB HDD
Integrated Graphics Card: Intel HD Graphics 4000
64-bit Windows 10 Pro Operating System
BMS 4.33 64 bit
Saitek X52
TrackIR 4
I connect the big monitor to the dock station, and I make the laptop touch screen the Helios’ screen. Now the FPS’s are horrendous! Like 20 FPS. But I hardly get any CTD’S so I guess that’s ok for now.
Here’s a picture of the desktop.Pika out.
-
I can see your problem straight away, pika. It seems like your setup is upside down. Electrons aren’t very good when inverted.
Are you running BMS off a laptop?
-
I knew something felt weird! :munch:
Yes, I have been running it off the laptop therefore the very low FPS performance. -
Have you sorted your screen-shifting problem yet then?
-
Hi Ice,
I’ve sorted my screen issues. Thanks for asking.
I want to express my thanks for your work but most importantly the way that you carry yourself helping everyone who ask for help with patience and good advice. By far this profile is at the top of all Helios profiles.
On another note, am I wrong to need to create a different profile base on yours of course, but for a started mission and one for ramp start?
Pika -
Very good to know you’re all set and thanks for the kind words! We are/were all n00bs at one point or another or with regards to one topic or another so this is my way of paying to forward to such a great hobby and community.
You are free to create different versions of my profile; weepop has created his own custom one based on his needs and I’m sure others have modified my profile for their use as well. You may need THREE profiles though… one for a cold-start, another for a ramp start, and another for in-the-air missions… all each would need really is just a change in the default start states of select switches.
-
Why is the ramp start different from the cold start?
Also, do you use a combination of BMS’s screen extractin utility and MFDE Utility? -
Sorry, I meant to say “taxi” start.
I did use BMS’s CDE and MFDE but tests on my new GPU showed better performance using just MFDE so that’s what I’m using now.
-
Ok Cool!
Thanks Ice -
Hi ice, i just downloaded and installed Helios and your profile. Unfortunately when i press a buton on screen, nothing happens. It looks like Helios and F4 bms are not connected. When i start helios i can add a new interface and pick falcon. However, when i first load your profile, after that i cant add falcon as an interface. What am i doing wrong? Which steps should i takenin which order? Do i have to add falcon as an interface after i opened your profile or is this not necessary? Or should i just open your profile?
Thanks, JeDa -
Jeda
you should have already selected BMS 4.32 (4.33 is not yet activated)
open profile in Helios editor and select “Falcon” tab on the top row of the middle screen from the pull down menu select BMS 4.32 then re save profile.
Make sure you are funning “Ice” key profile in BMS
Hope this helps
Ironman
-