Weapon Delivery Planner released
-
Nope, no need to point to anything. If WDP find a chart that belongs to the airport, the button will automatically be enabled.
Not all airports are included, so if you so some exotic theater, they are not always included.
Make sure that the correct airport has been selected. You might want to check/change it in the datacard, or in the DTC->Radio/Nav section.
If you have a specific airport with which this is happening?Gr Falcas
Thanks for reply.
I’ve tried with Kunsan Airport in the standard Korea theater.
First without loading any mission data, only selected Kunsan in the Performance Tab -> can’t click the “Charts” Button.
Then I tried the same with loading the BMS 4.33 Ground Ops training mission which also starts at Kunsan. -> the same result.
But there is a diagram for Kunsan in the "Cc:\Weapon Delivery Planner\Charts\South Korea\Kunsan Folder.
-
Thanks for reply.
I’ve tried with Kunsan Airport in the standard Korea theater.
First without loading any mission data, only selected Kunsan in the Performance Tab -> can’t click the “Charts” Button.
Then I tried the same with loading the BMS 4.33 Ground Ops training mission which also starts at Kunsan. -> the same result.
But there is a diagram for Kunsan in the "Cc:\Weapon Delivery Planner\Charts\South Korea\Kunsan Folder.
The button in the Performance tab seems to be a bit rebellious.
However, the button in the Radio/Nav tab in the DTC works fine here.Give it a try there.
Gr Falcas
-
I have this problem with WDP since today. Yesterday I only updated my Windows 10 x64 and all was ok.
In Details appear this:
Consulte el final de este mensaje para obtener más detalles sobre cómo invocar a la depuración
Just-In-Time (JIT) en lugar de a este cuadro de diálogo.************** Texto de la excepción **************
System.OverflowException: La operación aritmética ha provocado un desbordamiento.
en Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(String Value)
en WeaponDeliveryPlanner.clsLoadDTC.GetCallsignHud(String fName)
en WeaponDeliveryPlanner.clsLoadDTC.LoadCallsign(String fName, Boolean Version)
en WeaponDeliveryPlanner.cntDTC.GetCampFile()
en WeaponDeliveryPlanner.fclsMain.fclsMain_Load(Object sender, EventArgs e)
en System.EventHandler.Invoke(Object sender, EventArgs e)
en System.Windows.Forms.Form.OnLoad(EventArgs e)
en System.Windows.Forms.Form.OnCreateControl()
en System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
en System.Windows.Forms.Control.CreateControl()
en System.Windows.Forms.Control.WmShowWindow(Message& m)
en System.Windows.Forms.Control.WndProc(Message& m)
en System.Windows.Forms.ScrollableControl.WndProc(Message& m)
en System.Windows.Forms.Form.WmShowWindow(Message& m)
en System.Windows.Forms.Form.WndProc(Message& m)
en System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
en System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
en System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)************** Ensamblados cargados **************
mscorlib
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1063.1 built by: NETFXREL3STAGE
Código base: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
–--------------------------------------
WeaponDeliveryPlanner
Versión del ensamblado: 3.7.2.69
Versión Win32: 3.7.2.69
Código base: file:///E:/Weapon%20Delivery%20Planner/WeaponDeliveryPlanner.exeMicrosoft.VisualBasic
Versión del ensamblado: 10.0.0.0
Versión Win32: 14.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dllSystem
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dllSystem.Core
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dllSystem.Windows.Forms
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dllSystem.Drawing
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dllSystem.Runtime.Remoting
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dllSystem.Configuration
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dllSystem.Xml
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dllBMSUtils
Versión del ensamblado: 1.5.5.0
Versión Win32: 1.5.5.0
Código base: file:///E:/Weapon%20Delivery%20Planner/BMSUtils.DLLSystem.Windows.Forms.resources
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.resources/v4.0_4.0.0.0_es_b77a5c561934e089/System.Windows.Forms.resources.dllSystem.Data
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dllMicrosoft.VisualBasic.resources
Versión del ensamblado: 10.0.0.0
Versión Win32: 14.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic.resources/v4.0_10.0.0.0_es_b03f5f7f11d50a3a/Microsoft.VisualBasic.resources.dllSystem.Transactions
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dllSystem.EnterpriseServices
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dllSystem.Numerics
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dlldbwdp
Versión del ensamblado: 1.4.0.0
Versión Win32: 1.4.0.0
Código base: file:///E:/Weapon%20Delivery%20Planner/dbwdp.DLLmscorlib.resources
Versión del ensamblado: 4.0.0.0
Versión Win32: 4.6.1038.0 built by: NETFXREL2
Código base: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/mscorlib.resources/v4.0_4.0.0.0_es_b77a5c561934e089/mscorlib.resources.dllLzssManaged
Versión del ensamblado: 1.0.0.0
Versión Win32: 1.0.0.0
Código base: file:///E:/Weapon%20Delivery%20Planner/LzssManaged.DLLLzssNative
Versión del ensamblado: 0.0.0.0
Versión Win32:
Código base: file:///E:/Weapon%20Delivery%20Planner/LzssNative.DLL************** Depuración JIT **************
Para habilitar la depuración Just In Time (JIT), el archivo de configuración de esta
aplicación o equipo (machine.config) debe tener el
valor jitDebugging establecido en la sección system.windows.forms.
La aplicación también se debe compilar con la depuración
habilitadaPor ejemplo:
<configuration></configuration>
Cuando esté habilitada la depuración JIT, cualquier excepción no controlada
se enviará al depurador JIT registrado en el equipo
en lugar de controlarlo mediante el cuadro de diálogo. -
Hey Toto,
This has been implemented years ago already.
Go to settings and select A5 size.Gr Falcas
Thank you, that is great. I didn’t realize when you click “Save DataCard” it actually saved so many files, to include graphics (the prompt screen just shows the *.bdc file, so I assumed that’s all it saved). I guess I should RTFM.
Second question. Because Helios touchscreen profiles always refer to the same graphic file names, is it possible to change or set the default save name of the DataCard graphic files and location (much like the Upd Kneeboard function)? Ideally, I’d like the capability to always have my files saved in my Helios images directory with names, for instance, like “comm_left.jpg”. In that way, when I save the DataCard my Helios profile will have the most up-to-date cards.
Thank you again, for your wonderful and groundbreaking work!
-
Hey Silver,
The problem is with your callsign.ini. Some values for the HUD are not good.
So open up you Silver.ini with notepad and delete the following lines:[Hud] Color=-16711681 Scales=1 Brightness=1 FPM=0 DED=1 Velocity=0 Alt=1 SymWheelPos=1000
You can also just delete Silver.ini and create a new one by saving the DTC again in BMS.
Gr Falcas
I have this problem with WDP since today. Yesterday I only updated my Windows 10 x64 and all was ok.
In Details appear this:
Consulte el final de este mensaje para obtener más detalles sobre cómo invocar a la depuración
Just-In-Time (JIT) en lugar de a este cuadro de diálogo.************** Texto de la excepción **************
System.OverflowException: La operación aritmética ha provocado un desbordamiento.
en Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(String Value)
en WeaponDeliveryPlanner.clsLoadDTC.GetCallsignHud(String fName)
en WeaponDeliveryPlanner.clsLoadDTC.LoadCallsign(String fName, Boolean Version)
en WeaponDeliveryPlanner.cntDTC.GetCampFile()
en WeaponDeliveryPlanner.fclsMain.fclsMain_Load(Object sender, EventArgs e)
en System.EventHandler.Invoke(Object sender, EventArgs e)
en System.Windows.Forms.Form.OnLoad(EventArgs e)
en System.Windows.Forms.Form.OnCreateControl()
en System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
en System.Windows.Forms.Control.CreateControl()
en System.Windows.Forms.Control.WmShowWindow(Message& m)
en System.Windows.Forms.Control.WndProc(Message& m)
en System.Windows.Forms.ScrollableControl.WndProc(Message& m)
en System.Windows.Forms.Form.WmShowWindow(Message& m)
en System.Windows.Forms.Form.WndProc(Message& m)
en System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
en System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
en System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) -
Hey Silver,
The problem is with your callsign.ini. Some values for the HUD are not good.
So open up you Silver.ini with notepad and delete the following lines:Thanks, Thanks my friend great your support. I changed the value of HUD = 1 rather than I had and all right. Working like a champ. I could get into trouble WDP. Just in case I also got in Falcon and went back save the .ini
-
Found out from using “Save Cockpit defaults” keystrokes, adds the lines in the callsign.ini
I was trying to set the EPU switch, to off for default setup,(used to work in the past versions)
then Noticed WDP hang up at start.Great Job
This stuff is Awesome:bowd: -
Is it only a problem of mine or is the datacard slightly out of focus, when previewed for the print or actually saved to a PDF file (via a PDF printer)?
-
Is it only a problem of mine or is the datacard slightly out of focus, when previewed for the print or actually saved to a PDF file (via a PDF printer)?
A bit late on the reply, sorry for that.
The print function has been abandoned (and button removed) for some time. However, returned on request.
Better to use the “Save Datacard” instead. Than go to the location where the datacards are save (used the location button)
Than you find everything saved as pictures with a much better quality.Gr Falcas
-
del
-
Hi Falcas
Can I load on WDP a totally random map by inserting the image in the map folder and naming it ,say, ikaros map so i can load Ikaros theater and have the map i want appear in the map tab??
-
Hey,
Also WDP got an update with the new Registry Reading code.
See here post for update.
https://www.benchmarksims.org/forum/showthread.php?5293-Weapon-Delivery-PlannerGr Falcas
-
WDP and Mission Commander updates seem to be working great. Thanks, Falcas.
-
Hi, I am rather new here and trying to install WDP on a networked computer.
I’m talking about the latest release (3.7.3) and BMS 4.33U1.
If I install it on my main computer where falcon is installed no problem.
But on my networked computer (both computer under windows 10), I point to BMS install and it gives me this error message on startup:
_See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at BMSLocation.clsBmsLocation.FalconPilot(String KeyName)
at WeaponDeliveryPlanner.fclsMain.GetPilotName()
at WeaponDeliveryPlanner.fclsMain.FalconLoc()
at WeaponDeliveryPlanner.fclsMain.fclsMain_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1078.0 built by: NETFXREL3STAGE
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
–--------------------------------------
WeaponDeliveryPlanner
Assembly Version: 3.7.3.70
Win32 Version: 3.7.3.70
CodeBase: file:///D:/Weapon%20Delivery%20Planner/WeaponDeliveryPlanner.exeMicrosoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 14.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dllSystem
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1075.0 built by: NETFXREL3STAGE
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dllSystem.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dllSystem.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dllSystem.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1078.0 built by: NETFXREL3STAGE
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dllSystem.Runtime.Remoting
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dllSystem.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dllSystem.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1064.2 built by: NETFXREL3STAGE
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dllBMSUtils
Assembly Version: 1.5.5.0
Win32 Version: 1.5.5.0
CodeBase: file:///D:/Weapon%20Delivery%20Planner/BMSUtils.DLLSystem.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dllSystem.Transactions
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dllSystem.EnterpriseServices
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dllSystem.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dlldbwdp
Assembly Version: 1.4.0.0
Win32 Version: 1.4.0.0
CodeBase: file:///D:/Weapon%20Delivery%20Planner/dbwdp.DLLBMSLocation
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///D:/Weapon%20Delivery%20Planner/BMSLocation.DLLSystem.Web
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1073.0 built by: NETFXREL3STAGE
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.For example:
<configuration></configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box._If I click “continue” I get into the software.
But when I go to settings and point to locations, it finds falcon location, then tdf location OK, but DB location and weather file location remain blank.And by the way, another stupid question:
Is there a manual for WDP (in which case I could not find it) or are the videos I can find on your website acting as a manual ?Thanks for any help, and most of all thanks Falcas for what looks like a fantastic job.
Charles MOULIN
-
Edit: Erased post.
-
I think it is now the 6th time i try to download WDP and every time i try to extract it i get an error message, i did not get this issue with MC and WC.
-
Downloaded the latest WDP and installed on a Network PC to use it for flight planning.
The previous version worked fine, this new version won’t start and crashes.
Error Message Output:
Problemsignatur: Problemereignisname: CLR20r3 Problemsignatur 01: WeaponDeliveryPlanner.exe Problemsignatur 02: 3.7.3.70 Problemsignatur 03: 5715f9c4 Problemsignatur 04: BMSLocation Problemsignatur 05: 1.0.0.0 Problemsignatur 06: 5715f9a7 Problemsignatur 07: 14 Problemsignatur 08: 21 Problemsignatur 09: System.NullReferenceException Betriebsystemversion: 6.1.7601.2.1.0.256.1 Gebietsschema-ID: 1031 Zusatzinformation 1: 0a9e Zusatzinformation 2: 0a9e372d3b4ad19135b953a78882e789 Zusatzinformation 3: 0a9e Zusatzinformation 4: 0a9e372d3b4ad19135b953a78882e789 Lesen Sie unsere Datenschutzbestimmungen online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0407 Wenn die Onlinedatenschutzbestimmungen nicht verfügbar sind, lesen Sie unsere Datenschutzbestimmungen offline: C:\Windows\system32\de-DE\erofflps.txt
-
Hallo,
is there a possibility to overwrite the flight plan data from a preplanned map in WDP, load them in the data cartridge to use them in flight?
-
This post is deleted! -
if you can or at day I did.
The process is easy. but before you have to keep in mind that when you load your cartridge from the viper, this is modified by the ini file of the mission you are going to fly.
When I was testing this way, I did the following:
Make my cartridge and all the details of the mission, with the WDP, save it.
Then, once inside the Viper Falcon and loaded by an external program “HotkeyNet” copied cartridge WDP to …… Falcon BMS 4.33 \ User \ Config.
Reloaded the cartridge and saw the changes made to the WDP.This emerged at the rate of an idea. In a mission that was created with different flights. Each group of flight through the files created and past the WDP, could modify analyzing, maps, lists of major threats, etc … your flight plan.
Thus, more weight was discharged designer of the mission and involved more participants.A greeting
You can also use other programs like VoiceAttack, or VAC. They allow launch other programs. By voice command or keypress.
Well the idea is always the same. Copy the cartridge created with the WDP, the USER folder, once inside the Viper, and load.
Ideally, it would be able to recognize a program folders WDP, “Each mission is planned, is stored in a different directory.” and the ability to copy cartridge WDP, the USER folder. By pulsasion key.P.D
HotKeyNet, it is a program that maps the keyboard, so we were creating a simple BAT file. I copied cartridge WDP to Falcon. And with the HotKeyNet we assign the key you have mapped or the keyboard or Saitek, etc …
It would be great, that the WDP could do the same.
Give greater play when planning a mission.