YAME64 suite
-
How about you try to run yame from the actual folder instead of the shortcut? Perhaps the shortcut points to an exe in the wrong folder.
Sent from my LG-H818 using Tapatalk
Tried this - no joy
- Sharpe
-
Tried this - no joy
- Sharpe
Can you show a screenshot of your YAME64 folder?
Sent from my LG-H818 using Tapatalk
-
Can you show a screenshot of your YAME64 folder?
Sent from my LG-H818 using Tapatalk
Sure thing but I won’t be able to post it till tomorrow. Many thanks:)
- Sharpe
-
I’ve forwarded a copy of my files to Sharpe, we’ll see if that’ll work. Maybe the anti-virus is flagging it for some reason?
However, I’m noticing that when in the 3D world, and outside of the cockpit views like “chase” for example - the YAME objects do not update until I’m back in the jet? Is there a configuration setting or something to enable YAME to display/update the MFD’s and instruments while the view is say “chase” or something similar?
The same thing happens when using BMS’ own Cockpit Display Extraction methods, so I think BMS simply does not update the MFDs and some instruments while in an outside-cockpit view…. and is therefore not a YAME issue.
-
Hello, I’m new to YAME, but not Falcon 4. My intention is to implement YAME where previous older version of BMS and SP use to have a view called “cockpit ghost MFD” - which unfortunately does not exist anymore. So far, I’ve been able to get the client to display MFD and some instruments - looks good, and thanks to whomever has provided YAME as such an elegant solution. However, I’m noticing that when in the 3D world, and outside of the cockpit views like “chase” for example - the YAME objects do not update until I’m back in the jet? Is there a configuration setting or something to enable YAME to display/update the MFD’s and instruments while the view is say “chase” or something similar?
Yes, thanks for ruling out any issues - understood, and really not what I was trying to convey. I was hoping there was a setting or parameter that hooked YAME to outside the cockpit views so that the MFD’s and instruments are updated, dynamic, and in sync. Is that even possible?
-
I was hoping there was a setting or parameter that hooked YAME to outside the cockpit views so that the MFD’s and instruments are updated, dynamic, and in sync. Is that even possible?
So you are hoping YAME can still display MFDs and instruments and keep them working (in sync) even when you are outside the cockpit? I doubt this is possible. Like I said, even the BMS CDE exhibits this behavior so maybe the game itself just does not “draw” the MFDs/instruments when you are on an external view, and therefore there is nothing for YAME to hook on to. I could very well be wrong….
-
Hello people.
Thanks for this master piece…:)
I have running server with 64 version and client witth 32 version…and I haven´t extraction.
This is client.log form client…obviosuly
01/03/2006 12:47:14: ***************************************************
01/03/2006 12:47:14: * YAME client START *
01/03/2006 12:47:14: ***************************************************
01/03/2006 12:47:14: Data extraction: false
01/03/2006 12:47:14: Texture extraction: true
01/03/2006 12:47:14: Texture connecting to server.
01/03/2006 12:47:54: Texture extraction connected.
01/03/2006 12:48:25: Texture data extraction stop.
01/03/2006 12:48:29: Client::run ended.As I understand, I´m connected to server but there is no extraction, correct?
Any idea what is the problem?
Thank you
-
Sorry….I add I have left MFD in server Pc and is running perfectly.
-
Good morning.
Well, I have found the problem.
Is possible you don´t believe it but it´s true.
I´ve loaded Block 50 profile and I have extraction
If I deselect CMDS option in EW section, I don´t have extraction.
I don´t know if you can reproduce this issue, but I can promise you that´s was the problem.
Thank you
-
Good morning.
Well, I have found the problem.
Is possible you don´t believe it but it´s true.
I´ve loaded Block 50 profile and I have extraction
If I deselect CMDS option in EW section, I don´t have extraction.
I don´t know if you can reproduce this issue, but I can promise you that´s was the problem.
Thank you
Will look into this, thank you.
-
The last question
YAME32, how to run in no window mode?
Thx
-
The last question
YAME32, how to run in no window mode?
Thx
Sorry, but I don’t understand what you mean…
-
I´ve started Yame 32 and is in window mode.
I´ve tried to edit yame.xml with notepad++ but no results.
-
In the YAME client UI, go to CLIENT -> WINDOWS and select the appropriate window. Check/un-check BORDER as appropriate. Try running in FULLSCREEN mode or setting it to MASKED and the “window mode” top border will not appear.
-
Thank you very much
-
Hello, Now that I’m over the BMS hooks not being present within BMS so that display instruments update values while in Falcon’s #D outside views, I’d like to discuss a couple of issues that I’m hoping somebody can provide some solutions.
1.) The YAME UI is very small on my computer - which is a Windows 10, 64bit I7 CPU with 3200X1800 touchscreen display. I’ve tried all the compatibility troubleshooting steps to no avail. I also have a second 1920X1080 display/monitor connected. In trying to drag the UI to the second monitor, the display is still micro small.
2.) The touchscreen with the 3200X1800 display functions, but the OSB button positions do not seem to line up with the callbacks. Meaning when touching OSB’s, the function is offset slightly to where the button position displays.I’m really liking the capabilities of YAME especially the MFD piece - thanks so much for all of your efforts!
-
I think the actual size of the YAME UI is set, so a bigger resolution monitor = smaller UI size. On a 1920x1080 res monitor, it should be more than enough to be useful. Maybe you’ve zoomed out or changed your desktop size settings?
-
Hi
I use YAME my first time and have some problems. Google and the forum can not help me yet (at least I did not find anything).
First of all, my setup:
PC 1 for Falcon BMS with YAME64 1.2.1 server.
PC 2 for instruments (3 monitors) and YAME64 1.2.1 client.Server settings:
falcon BMS.cfg:
Client Settings:
When I start the client, the following error message appears:
My ADI looks like this:
And unfortunately, the MFDs, the RWR and the DED are not displayed at all. Otherwise, the other instruments will work as expected.
The file “d3d9.dll” did not exist in the x64 folder.
The second problem is that my CPU fan is running at full speed when I start the client …
I hope this is not a double post and someone can help me.
Regards
MadDoc
-
To All:
Around post 1108/1109, I stated that when I updated windows 10 to the new fall creation, when using yame, my FPS dropped to around 5 FPS. So on the advice of ICE, I rolled back to windows version 1709 and everything is fine. However, I keep on getting notices from MS to update to the fall creation. One day I will have to do so. Has anyone else updated to the fall creation of windows 10 without any issues with respect to the FPS loss when using Yame? Have the developers of Yame found what the issue is with DX9 games, Yame and the fall creation? -
You will remember that I’ve strongly advised against upgrading to Win10CU as I’ve had issues with CU and my touchscreens. After some time, Windows updated itself anyway and I braced for the worst. Luckily, my initial issues never happened again so whatever was missing from Win10CU must’ve got added in and fixed. Therefore, do not worry too much about Win10FCU… just delay it as much as you can so that you aren’t a beta tester… if it ain’t broke, don’t fix it! When the time comes that we’ll be forced to update to it, hopefully the initial bugs will be ironed out.
Unless there’s something in Win10FCU that you really, REALLY need?