YAME64 suite
-
Guys,
Can someone help me - I have had a strange death of YAME tonight. Everything was working 2 nights ago when I was flying, and YAME has been working flawlessly for me since I installed it about 3/4 months ago.However, the problems tonight started when I tried to load YAME - but it didnt appear in the desktop like normal. All that happened was that the task bar application symbol of YAME loaded, and when you hovered over it, it showed the mini picture of the YAME screen like i would expect to see on my desktop - but NOTHING was there at all. Tried restarts and switch offs - nothing would actually get the application to load as normal.
I have then tired an uninstall/reinstall of YAME. Reinstall seems to have worked BUT, when I try to load the YAME short cut I get this message (about 3-6times):
“the code execution cannot proceed because sfml-graphics-2.dll was not found. Reinstalling the program may fix this problem”Can anyone help? I am totally lost
- Sharpe
-
SFML is a library used in Yame, no idea why this should suddenly be gone :s
-
Well, would that not be put back in when he re-installs YAME?
Sharpe, do you delete the YAME folder when you uninstall it?
-
Well, would that not be put back in when he re-installs YAME?
Sharpe, do you delete the YAME folder when you uninstall it?
Yes. And I have since uninstalled and deleted it. No joy.
- Sharpe
-
I wonder if you can install YAME and someone sends you the appropriate .dlls if that will work?
-
How about you try to run yame from the actual folder instead of the shortcut? Perhaps the shortcut points to an exe in the wrong folder.
Sent from my LG-H818 using Tapatalk
-
Hello, I’m new to YAME, but not Falcon 4. My intention is to implement YAME where previous older version of BMS and SP use to have a view called “cockpit ghost MFD” - which unfortunately does not exist anymore. So far, I’ve been able to get the client to display MFD and some instruments - looks good, and thanks to whomever has provided YAME as such an elegant solution. However, I’m noticing that when in the 3D world, and outside of the cockpit views like “chase” for example - the YAME objects do not update until I’m back in the jet? Is there a configuration setting or something to enable YAME to display/update the MFD’s and instruments while the view is say “chase” or something similar?
-
Hello, I’m new to YAME, but not Falcon 4. My intention is to implement YAME where previous older version of BMS and SP use to have a view called “cockpit ghost MFD” - which unfortunately does not exist anymore. So far, I’ve been able to get the client to display MFD and some instruments - looks good, and thanks to whomever has provided YAME as such an elegant solution. However, I’m noticing that when in the 3D world, and outside of the cockpit views like “chase” for example - the YAME objects do not update until I’m back in the jet? Is there a configuration setting or something to enable YAME to display/update the MFD’s and instruments while the view is say “chase” or something similar?
There is no such a setting for yame. I need to look what state is set when looking outside the cockpit so to update the shared memory even in those situations.
Inviato dal mio Y635-L21 utilizzando Tapatalk
-
How about you try to run yame from the actual folder instead of the shortcut? Perhaps the shortcut points to an exe in the wrong folder.
Sent from my LG-H818 using Tapatalk
Tried this - no joy
- Sharpe
-
Tried this - no joy
- Sharpe
Can you show a screenshot of your YAME64 folder?
Sent from my LG-H818 using Tapatalk
-
Can you show a screenshot of your YAME64 folder?
Sent from my LG-H818 using Tapatalk
Sure thing but I won’t be able to post it till tomorrow. Many thanks:)
- Sharpe
-
I’ve forwarded a copy of my files to Sharpe, we’ll see if that’ll work. Maybe the anti-virus is flagging it for some reason?
However, I’m noticing that when in the 3D world, and outside of the cockpit views like “chase” for example - the YAME objects do not update until I’m back in the jet? Is there a configuration setting or something to enable YAME to display/update the MFD’s and instruments while the view is say “chase” or something similar?
The same thing happens when using BMS’ own Cockpit Display Extraction methods, so I think BMS simply does not update the MFDs and some instruments while in an outside-cockpit view…. and is therefore not a YAME issue.
-
Hello, I’m new to YAME, but not Falcon 4. My intention is to implement YAME where previous older version of BMS and SP use to have a view called “cockpit ghost MFD” - which unfortunately does not exist anymore. So far, I’ve been able to get the client to display MFD and some instruments - looks good, and thanks to whomever has provided YAME as such an elegant solution. However, I’m noticing that when in the 3D world, and outside of the cockpit views like “chase” for example - the YAME objects do not update until I’m back in the jet? Is there a configuration setting or something to enable YAME to display/update the MFD’s and instruments while the view is say “chase” or something similar?
Yes, thanks for ruling out any issues - understood, and really not what I was trying to convey. I was hoping there was a setting or parameter that hooked YAME to outside the cockpit views so that the MFD’s and instruments are updated, dynamic, and in sync. Is that even possible?
-
I was hoping there was a setting or parameter that hooked YAME to outside the cockpit views so that the MFD’s and instruments are updated, dynamic, and in sync. Is that even possible?
So you are hoping YAME can still display MFDs and instruments and keep them working (in sync) even when you are outside the cockpit? I doubt this is possible. Like I said, even the BMS CDE exhibits this behavior so maybe the game itself just does not “draw” the MFDs/instruments when you are on an external view, and therefore there is nothing for YAME to hook on to. I could very well be wrong….
-
Hello people.
Thanks for this master piece…:)
I have running server with 64 version and client witth 32 version…and I haven´t extraction.
This is client.log form client…obviosuly
01/03/2006 12:47:14: ***************************************************
01/03/2006 12:47:14: * YAME client START *
01/03/2006 12:47:14: ***************************************************
01/03/2006 12:47:14: Data extraction: false
01/03/2006 12:47:14: Texture extraction: true
01/03/2006 12:47:14: Texture connecting to server.
01/03/2006 12:47:54: Texture extraction connected.
01/03/2006 12:48:25: Texture data extraction stop.
01/03/2006 12:48:29: Client::run ended.As I understand, I´m connected to server but there is no extraction, correct?
Any idea what is the problem?
Thank you
-
Sorry….I add I have left MFD in server Pc and is running perfectly.
-
Good morning.
Well, I have found the problem.
Is possible you don´t believe it but it´s true.
I´ve loaded Block 50 profile and I have extraction
If I deselect CMDS option in EW section, I don´t have extraction.
I don´t know if you can reproduce this issue, but I can promise you that´s was the problem.
Thank you
-
Good morning.
Well, I have found the problem.
Is possible you don´t believe it but it´s true.
I´ve loaded Block 50 profile and I have extraction
If I deselect CMDS option in EW section, I don´t have extraction.
I don´t know if you can reproduce this issue, but I can promise you that´s was the problem.
Thank you
Will look into this, thank you.
-
The last question
YAME32, how to run in no window mode?
Thx
-
The last question
YAME32, how to run in no window mode?
Thx
Sorry, but I don’t understand what you mean…