Test low-poly toys in BMS4..
-
I’m afraid you’ve to use FF DOFs for converted Rafale…pilot head DOFs are the best pick.
-
-
Oh! Mirage 4000… Sad it never went operational.
-
Still be really cool if someone could actually design a F-106 Delta Dart. the 318 FIS (my first active duty Unit in the USAF) did a show of force deployment there I believe in the 70’s
-
F-106 had her last flight in 1988… It could be an early Falcon BMS era fighter…
- 49th Fighter-Interceptor Squadron – Griffiss AFB / 1968–1987
- 5th Fighter-Interceptor Squadron – Minot AFB / 1960–1985
- 101st Fighter Interceptor Squadron, MA ANG Otis ANGB / 1972–1988
- 19th Fighter Interceptor Squadron, NJ ANG Atlantic City ANGB / 1972–1988
- 159th Fighter Interceptor Squadron, FL ANG Jacksonville ANGB / 1974–1987
- 186th Fighter Interceptor Squadron, MT ANG Great Falls ANGB / 1972–1987
-
Hey ccc1tw,
Could you extract wings and cockpit from the F117A model then? In a similar way like you did for the Rafale ?
Would be so cool to have a bit more convincing F117 even if it would not be high detailed.Cheers Obi1
-
F106 > there’s one in low poly lod zip.
F117 3d pit > I don’t think you can see wings and nosetip… the FOV is limited. the only usable part is canopy.
a quick solution is F16 3d main pit + F117 canopy as cockpitwing model. -
How can you extract the canopy part from the main f117 lod ? I could find that switch nr 5 is actually related to the canopy part, but finding the node part in the lod tree is not so easy.
-
http://www.mediafire.com/file/84qzks0a4z1vs7h/F117_CkptWng__Canopy.zip
F117 ckptwing and canopy file… for the functionality, I use one F16 3d function pit for interior.
hmmm… the canopy frames look too thick and make FOV really bad…all due to canopy-3d main pit mismatch and one-eye perspective.
-
Wow really great what you did with the lod extractions. The wings and canopy seem to be working, although I cant seem to get the MFDs RWR of the F-16 working together with the canopy lod, they are blank. Disabling the canopy lod and its working. Not sure what I did wrong or how to fix it. Maybe the dimensions I use with the caopy lod?
Do you still see functional f16 MFDs at your side?Thanks so much already
Obi1
-
The wings and canopy seem to be working, although I cant seem to get the MFDs RWR of the F-16 working together with the canopy lod, they are blank. Disabling the canopy lod and its working. Not sure what I did wrong or how to fix it. Maybe the dimensions I use with the caopy lod?
Do you still see functional f16 MFDs at your side?
Obi1oops… you got me. no MFDs and RWR… I tried other pit files, no go.
once canopy disabled, MFDs back. weird bug. -
oops… you got me. no MFDs and RWR… I tried other pit files, no go.
once canopy disabled, MFDs back. weird bug.Sounds as if the RTT polys of the MFD’s are on the same switch as the canopy. They shouldn’t be.
-
Cockpits other than F-16 seem to work without this issue.
-
Cockpits other than F-16 seem to work without this issue.
my test with A10 3d interior pit still no go. too bad F16 pit is the best pick for F117.
Like PH said, could be switch issue.
I change canopy switch from 5 to 3. no go. remove swtich node from canopy, no go.
glue canopy part back to cockpitwing model, no go. I’m stuck.need some refreshing… old pic for SKLEGIN
-
All right, I confirm F-22 3d pit(the one in Nordic DB) is OK for F117… all MFDs/RWR working!
BTW my previous test shows, canopy of this narrow space type(F117/102/106) should use separate canopy lod. when I glue canopy back to cockpitwing model, some parts become invisible as too close to pilot’s eye spot.
-
thanks PH for DOF number!
-
Okay, what’s that?
-
one old loser
-
The Northrop YA-9, the opponent of the Warthog.
-
YA-9 was in my opinion much sexier than A-10… Just my point of view.