YAME64 suite
-
In what theater are you experiencing this? Iirc, nordic and one other had this issue but Korea and Balkans don’t.
-
Pretty sure he has a fresh vanilla install with only Korea theater.
-
I updated from windows 7 to windows 10. My YAME installation does not work anymore.
I tried to reinstall, but i am having the very same problem after the reinstall.
The first I run YAME it propts me to “First select the BMS folder”, but in the Globals tab, I can’t select anything. BMS is working ok
I tried the search this thread function, but I could not find anything applicable.
Thank you
-
If you can’t set BMS path in the globals tab (ref manual page 80 and on), set it manually in the config. Search for yame64.xml in the config subfolder and set it correctly on this part of the file:
<falcon><windowed>true</windowed> <path>C:\Falcon BMS 4.33 U1</path></falcon>
-
If you can’t set BMS path in the globals tab (ref manual page 80 and on), set it manually in the config. Search for yame64.xml in the config subfolder and set it correctly on this part of the file:
<falcon><windowed>true</windowed> <path>C:\Falcon BMS 4.33 U1</path></falcon>
Thanks for your help Fd
I found out that the problem was not YAME, but the Falcon(original) and Falcon BMS installations.
For whatever reasons, after updating to w10 over my previous w7 installation, both the original Falcon and Falcon BMS were not recognized as installed.
What I did is to backup the BMS folder and reinstalled both the original Falcon and BMS. I had to buy a steam copy of Falcon because the installer from my original Falcon disk was not working in windows 10.
After reinstalling both Falcons, I just copied my whole old BMS installation (with a lot of theaters) over the fresh one and now YAME detects the BMS registry entries as it should and the SERVER tab is there again.
-
Thanks for your help Fd
I found out that the problem was not YAME, but the Falcon(original) and Falcon BMS installations.
For whatever reasons, after updating to w10 over my previous w7 installation, both the original Falcon and Falcon BMS were not recognized as installed.
What I did is to backup the BMS folder and reinstalled both the original Falcon and BMS. I had to buy a steam copy of Falcon because the installer from my original Falcon disk was not working in windows 10.
After reinstalling both Falcons, I just copied my whole old BMS installation (with a lot of theaters) over the fresh one and now YAME detects the BMS registry entries as it should and the SERVER tab is there again.
original f4 disc and setup works on win10. Tricky but it does.
Also you could do all without the reinstall and save all that time and nerves.
don’t ask how it’s not allowed to say.
doing it for years now I even forgot when it was the last time I installed F4+BMS.
Though will do it as soon as I get my VFS and finish my ssd flight setup after x years of inactivity.
-
SO, I solved the registry and SERVER TAB issue and now I have hve some other problem.
I would like to run the extraction on a server-client config with another PC. I would like to use the 3Dhook that was working beautifully on my W7x64 install.
I have a triple monitor setup, using nvidia surround toa total res of 6050x1200(bezel corrected). GTX 108ti with latest drivers.
The situation I have now is that when I use the 3dhook extraction, the extraction works, but I get only 3d image on the center monitor and with very low resolution. I tried to change it on the BMS setup, but no matter what I do, the ingame 3d resolution is still very low and left and right monitors are black.
If I switch the 3dhook extraction off and remove the Hook files, then obviously the MFD extraction stops, but now the 3d world is rendered correctly on the three monitors.
I found in the forum some fix about checking the “Disable full screen optimizations” box on the shortcut compatibility settings, but it does not work for me, or at least not when using 3dhook extraction.
Any ideas?
Thanks
-
UPDATE.
The problem seems to be linked to the presence of the file d3d9.dll in the Bin7/x64/ folder…
I tried to remove the hook file and do the extraction via textures and then I can select the full resolution.
As soon as the d3d9.dll file is present, the resolution is locked to the low value, even though in the bms setup menu it is set to the correct 6050x1200 value.
I would like to find a solution to use the 3dhook extraction, because of its better performance.
Any ideas? Is it possible to get an updated d3d9.dll file which does not cause this problem?
-
UPDATE.
The problem seems to be linked to the presence of the file d3d9.dll in the Bin7/x64/ folder…
I tried to remove the hook file and do the extraction via textures and then I can select the full resolution.
As soon as the d3d9.dll file is present, the resolution is locked to the low value, even though in the bms setup menu it is set to the correct 6050x1200 value.
I would like to find a solution to use the 3dhook extraction, because of its better performance.
Any ideas? Is it possible to get an updated d3d9.dll file which does not cause this problem?
this is not a problem with the dll, but windows itseft. don’t know if the “disable full screen optimization” can help you. What i can say is that the beta testers of the new version never reported such an issue.
-
I am already using the “disable full screen optimization” workaround, but it does not help me. As soon as the hook dll is there, the resolution os locked…
I must have launched BMS and YAME like 100 times today looking for a pattern and trying a possible working combination.
Too bad, because the texture extraction works good, but the hook extraction works even better, or at least it did on my W7x64 install.
Arty, when you say new versio, I understand you#re talking about the 1.2.1, right?? But this version is quite old, isn’t it?
-
Hi Guys…
I am newbi here… Have a dream to build my own F-16 Simulators. I have downloaded Falcon BMS 4.33 and Yame64.
First I tried to setup via Falcon BMS, I could move LMFD, RMFD, RWR, etc… but not others gauge. so I tried to setup via YAME64. But I dont understand how to setup the instrument to extra monitors. In YAME64 apps the “RUN” tabs is empty. and how to extract the instrument to other monitor.I tried to read this forum from beginning, but I coudnt find the answer.
-
Read the manual
-
Read the manual
yes, I did… but I still dont understand. In the manual, when YAME64 is running. at “RUN” tab already has several programs such as: TrackIR, HOTAS CCP, Weapon Delivery Planner, etc… which is mine nothing… no apps installed…
I will read more carefully to understand…
-
yes, I did… but I still dont understand. In the manual, when YAME64 is running. at “RUN” tab already has several programs such as: TrackIR, HOTAS CCP, Weapon Delivery Planner, etc… which is mine nothing… no apps installed…
I will read more carefully to understand…
Like the manual says:
In the list on the top you will see all the external applications you have added. […] If you want to add a new application just hit the Add new button.
It doesn’t install apps, it lets you run (start) existing apps on your computer from within YAME.
-
is it possible for YAME to recognize an android tablet as an extra window to extract gauges?
thx in advance!!
keep up this excellent project! -
is it possible for YAME to recognize an android tablet as an extra window to extract gauges?
thx in advance!!
keep up this excellent project!no, but take a look at spacedesk application, it works very well
-
Spacedesk + Yame. It´s what i use! No lags or delay.
-
Greetings.
I can’t solve an issue I ran into recently, maybe you could help me.
I installed Yame long time ago, and it’s worked perfectly on 4 monitors (one big screen form BMS, three small monitor for MFD and center).I had to change my monitor cables, because of other reasons, and since then the two small MFD monitor is not working. Windows see them, extended desktop is working on them, if I go into gauges settings, the Yame windows and they content is in the good position, placed into the center of both MFD frame. Everything seems fine as it should.
But when I click on start Yame client, only the center monitor will be white, and in BMS only the center monitor show me Yame content. Both side monitors show me only the Windows background.Not sure what could solve this problem, before I would start delete or reinstall anything, I ask you first.
Any idea?Thanks in advance.
Cheers. -
Nwm, I have found the error.
Something unchecked the “Visible” checkbox in they “Edit” page… :doh: I swear, it wasn’t me -
I am already using the “disable full screen optimization” workaround, but it does not help me. As soon as the hook dll is there, the resolution os locked…
I must have launched BMS and YAME like 100 times today looking for a pattern and trying a possible working combination.
Too bad, because the texture extraction works good, but the hook extraction works even better, or at least it did on my W7x64 install.
Arty, when you say new versio, I understand you#re talking about the 1.2.1, right?? But this version is quite old, isn’t it?
Well, after lots of try and error BMS runs, I found a pattern that solves my resolution lock problem. I post it because it may be helpful for others in the future…
As I said, this low res lock problem, only happens when I use th 3dhook extraction.
I found a workaround. After launching BMS (either through the BMS shortcut or directly via YAME) I have to alt+TAB and cycle back again to the BMS UI.
I have to do this every time I enter the 3d world.
This means that everytime I go back to the 2dUI, I have to alt+TAB and cycle back to the BMS. This way the next time I enter the 3d, the resolution is corrcet and the display streches to my three monitors.
As Roccio said, this looks more like a Windows issue. It is not a very stylish workaround, but it works…
I did not find a way to make it work without alt+tabbing. It looks like if BMS lost focus as thf full screen app or somethnig like that.