Morphine's Profile
-
Got a quick question.
When I don’t run your profile with the TARGET software, I can select my rudder pedals in the advanced options. If I run the profile, I can’t select my rudders ingame.
What can I do to get them work with the profile? I’d have the TM rudder pedals.
Go check the thread below, Gastone has been keeping the script updated and has a version for using the rudder pedals. There’s a line that needs to be added to exclude them from the profile.
https://www.benchmarksims.org/forum/showthread.php?32399-A-Guide-to-Morphine%E2%80%99s-Profile-for-BMS-4-33-and-Beyond -
Go check the thread below, Gastone has been keeping the script updated and has a version for using the rudder pedals. There’s a line that needs to be added to exclude them from the profile.
https://www.benchmarksims.org/forum/showthread.php?32399-A-Guide-to-Morphine%E2%80%99s-Profile-for-BMS-4-33-and-BeyondGreat, Thank you!
-
Hi Pilots,
I’ve updated the Morphine’s Profile to be compatible with the 4.34 “BMS Full keys”
You can download it here : https://drive.google.com/file/d/1kzh7MuFMd2mjs59eoBekh645derbKcCP/view?usp=sharing
it also works with MFD Server,Pease let me know if you have issues
Enjoy (thanks to Morphine and Gastone)
-
Thanks Benco for your work.
I have a small mistake.
In the Autopilot Select Switch B, in the throttle.
It should be: Alt (pitch) Hold.
But instead it shows: F-18 throttle - ATC Button. -
dead link… any alternative in order to download?
-
Sorry,
The refresh link with the fix @Redman
https://drive.google.com/file/d/1kzh7MuFMd2mjs59eoBekh645derbKcCP/view?usp=sharing
Thanks for your feedback ! -
No… Thank you my friend!!
-
I hope I haven’t messed up here but this updated profile still isn’t working correctly. China hat keeps putting my left MFD in to the Test page and the Mic Hat does all kinds of strange things.
-
I hope I haven’t messed up here but this updated profile still isn’t working correctly. China hat keeps putting my left MFD in to the Test page and the Mic Hat does all kinds of strange things.
Check your devicesortting.txt and make sure thrustmaster combine is at the top. Mine looks like this.
{FFFF044F-0000-0000-0000-504944564944} "Thrustmaster Combined" {B351044F-0000-0000-0000-504944564944} "F16 MFD 1" {B352044F-0000-0000-0000-504944564944} "F16 MFD 2" {C0F2068E-0000-0000-0000-504944564944} "CH Pro Pedals USB"
-
Hi Benco,
I used Morphine’s profile in 4.33. Installed yours but it seems to have different functions than Morphile’s profile. For example, the NWS is gone and being replaced by remove pilot .
Did you modify Morphine profile a lot ?
-
Hi cobragva,
This profile works only with 4.34 using the key file joined.
The only things I changed are on the hat at the front of the throttle. -
Hi Benco,
Thank you for your quick answer.
I used your version 5 of your tmc with your key file.
However, when I press the warthog button which was used for NWS with Morphine profile, the outcome with your profile is to remove the pilot in the cockpit.
Is this intended ? Do you have the same outcome ?
Thanks in advance for your answer.
Kind regards,
Pascal -
Hi Benco,
Thank you for your quick answer.
I used your version 5 of your tmc with your key file.
However, when I press the warthog button which was used for NWS with Morphine profile, the outcome with your profile is to remove the pilot in the cockpit.
Is this intended ? Do you have the same outcome ?
Thanks in advance for your answer.
Kind regards,
PascalHi Pascal,
It works fine for me, a capture when i press the button 5 or using the shortcut “shift + !”
Maybe your keyboard config ? Try the shortcut and tell me.
-
Hi Benco,
Thank you for your help…as I couldn’t find what was wrong, I downloaded again your files and installed them again and now it works…go figure.
The only question I have is : what are the short cuts to make the pilot appear / disappear ? it is written Alt c; p so I press on all 3 but it doesn’t work. Maybe a function on the joystick/throttle could be good.
best,
Pascal -
Hi Benco,
Thank you for your help…as I couldn’t find what was wrong, I downloaded again your files and installed them again and now it works…go figure.
The only question I have is : what are the short cuts to make the pilot appear / disappear ? it is written Alt c; p so I press on all 3 but it doesn’t work. Maybe a function on the joystick/throttle could be good.
best,
PascalI think it’s Alt + C (release) then p
-
Hi guys. I have a question. Based on Morphine´s/Gastone´s keyfile, there are the following lines for the coolie switch L/R
OTWSelectHUDMode -1 0 0x2 0 0 0 1 “VIEWINT: HUD Only”
FOVToggle -1 0 0x26 0 0 0 1 “VIEWGEN: Look Closer - Toggle”However I want them for the rudder. So, is it feasible to change the above to
AFRudderLeft -1 0 0x2 0 0 0 1 “FCTRL: Rudder Left”
AFRudderRight -1 0 0x26 0 0 0 1 “FCTRL: Rudder Right”Or do i have to change it to this
OTWSelectHUDMode -1 0 0x33 0 0 0 1 “VIEWINT: HUD Only”
FOVToggle -1 0 0x34 0 0 0 1 “VIEWGEN: Look Closer - Toggle”Thanks in advance
-
Hi there.
Its been years since ive played falcon. I should have guessed I would run into problems now that ive forgotten everything. i wondered if you could give us a clue into what I might be doing wrong?ive put the key file in the config directory and have run the script. (not sure which tmc to run - but tried both)
i keep getting: Runtime Error: Symbol not found: TWCSThrottle in main ( line 11 in Warthog_BMS_Full_4_434_benco.tmc )
wondered if you could tell me what I might be doing wrong?
undoubtedly me. apprecaite you taking the time to update the file for us. very nice of you kind sir…
many thanks.
-
@Cpt:
Hi there.
Its been years since ive played falcon. I should have guessed I would run into problems now that ive forgotten everything. i wondered if you could give us a clue into what I might be doing wrong?ive put the key file in the config directory and have run the script. (not sure which tmc to run - but tried both)
i keep getting: Runtime Error: Symbol not found: TWCSThrottle in main ( line 11 in Warthog_BMS_Full_4_434_benco.tmc )
wondered if you could tell me what I might be doing wrong?
undoubtedly me. apprecaite you taking the time to update the file for us. very nice of you kind sir…
many thanks.
Hey Cpt Calm,
Are you using the last version of Target UI? -
Hi guys. I have a question. Based on Morphine´s/Gastone´s keyfile, there are the following lines for the coolie switch L/R
OTWSelectHUDMode -1 0 0x2 0 0 0 1 “VIEWINT: HUD Only”
FOVToggle -1 0 0x26 0 0 0 1 “VIEWGEN: Look Closer - Toggle”However I want them for the rudder. So, is it feasible to change the above to
AFRudderLeft -1 0 0x2 0 0 0 1 “FCTRL: Rudder Left”
AFRudderRight -1 0 0x26 0 0 0 1 “FCTRL: Rudder Right”Or do i have to change it to this
OTWSelectHUDMode -1 0 0x33 0 0 0 1 “VIEWINT: HUD Only”
FOVToggle -1 0 0x34 0 0 0 1 “VIEWGEN: Look Closer - Toggle”Thanks in advance
None of those are the lines you want to change.
You need to change FOVToggle 22 8 -2 0 0x0 0 to AFRudderRight 22 8 -2 0 0x0 0
and OTWSelectHUDMode 24 8 -2 0 0x0 0 to AFRudderLeft 24 8 -2 0 0x0 0 -
once again, thank you Gastone