Weapon Delivery Planner released
-
-
Ah, that’s it then. Download the next one.
Err, dunno man, I have the current version 3.7.10.115 dated 24 April 2019.
-
Same issue. Glad it’s not just me.
-
Version before latest did that. What’s your version number exactly? Works fine here.
3.7.10.116 dated 24 April 2019
-
I think the package labelled as 115 has actually been updated to 116. Check for a NewFeatures3710_116.txt file in your WDP folder.
It should have the following lines at the top of it:
Weapon Delivery Planner 3.7.10 build 116 (28 Apr 2019) Datacard - Update Kneeboard can now select "Original". This will look for a jpg file with the theater name from the selection box in the Main screen and "_left" or "_Right" added. Example "Korea_Left.jpg" ------------------------------------------------------------------------------------------------------------------------
If you don’t have this version just download WDP again (even though it’s still labelled as 115 on the WDP website) and unzip the files into your WDP folder, overwriting as necessary. Then report back. 116 works for me with kneeboards.
-
I think the package labelled as 115 has actually been updated to 116. Check for a NewFeatures3710_116.txt file in your WDP folder.
It should have the following lines at the top of it:
Weapon Delivery Planner 3.7.10 build 116 (28 Apr 2019) Datacard - Update Kneeboard can now select "Original". This will look for a jpg file with the theater name from the selection box in the Main screen and "_left" or "_Right" added. Example "Korea_Left.jpg" ------------------------------------------------------------------------------------------------------------------------
If you don’t have this version just download WDP again (even though it’s still labelled as 115 on the WDP website) and unzip the files into your WDP folder, overwriting as necessary. Then report back. 116 works for me with kneeboards.
Absolutely. And to add a bit more to the confusion, let’s say that I had a 115 version with a newFeatures…114.txt file in it, which had updating kneeboards working very well.
116 downloaded. Yes, it’s called 115, and it has the …116.txt in it.
PS: quick test on MFD tab to make sure about it and latest version. It sees my Harrier MFD settings. I load the original MFD file, it’s totally weird in the end. Just reporting.
-
How do you get the WDP kneeboard to display in the BMS 3D cockpit?
-
It’s a texture for the pilot model so first you need to be able to toggle the pilot model in BMS. I think this is Alt-C:P by default.
The customized texture for the pages portion of the pilot model texture is generated by WDP and can be automatically placed in the BMS folder where appropriate. There is a button on the side that generates the texture. You can select which two pages will be made into the texture. When successful it says “8XXX.dds created” (I forget the exact filename.)
-
Hi,
I am going to use WDP for creating kneeboards. And while I found it rather easy to make a proper kneeboard for campaign (by opening *.cam file) I didn’t find the way to make a kneeboard for TEs. Once I open mission *.tac file I can select only DPRK packages, not US ones.Is it a bug? Or there is another way to do it?
- by kneeboard it this specific case I mean exported texture put on 3D pilot model legs.
Again, the same problem. This time with campaign:
Tiger Spirit, 14th FS based in Kimpo.
I can only select between ROK and DPRK… I tried to reset sides, but no luck this time.
-
Again, the same problem. This time with campaign:
Tiger Spirit, 14th FS based in Kimpo.
I can only select between ROK and DPRK… I tried to reset sides, but no luck this time.
There’s only 2 sides in this campaign.
(EDIT: at this stage… and maybe several countries, but still 2 sides)
-
Yes, there are two sides, but 14th FS belongs to US. It is active so it should be selectable. Or am I wrong on this?
-
@jc1:
How do you get the WDP kneeboard to display in the BMS 3D cockpit?
It’s a texture for the pilot model so first you need to be able to toggle the pilot model in BMS. I think this is Alt-C:P by default.
The customized texture for the pages portion of the pilot model texture is generated by WDP and can be automatically placed in the BMS folder where appropriate. There is a button on the side that generates the texture. You can select which two pages will be made into the texture. When successful it says “8XXX.dds created” (I forget the exact filename.)
Alt-C:P was not it. If there is some other button combination, what could it be? In the meantime, I found that in BMS setup Graphics Page there is an option to select “Pilot Model”. But before you get to BMS you must, in WDP, click on the button on the side, “Upd Kneeboard”. Now my question is: Is there any way to change the kneeboard pages while in BMS 3-D cockpit?
-
The show pilot key bind is between you and your key file. I forget the default bind for it but it’s in the documentation. And the key combo to my memory was that weird one that you have to press a combo like ctrl C and then immediately another a separate key to finish the sequence. That’s why personally I changed mine to Alt-P.
In fact it’s probably Ctrl-C:P.
The knee board model only has the one surface and I’ve never heard of dynamically changing any texture during 3d runtime.
-
Yes, there are two sides, but 14th FS belongs to US. It is active so it should be selectable. Or am I wrong on this?
US is a “visitor” in Korea. The teams are combined to one team and flights/packages are mixed.
This has always been the case in Falcon, nothing wrong.Gr Falcas
-
@jc1:
Alt-C:P was not it. If there is some other button combination, what could it be? In the meantime, I found that in BMS setup Graphics Page there is an option to select “Pilot Model”. But before you get to BMS you must, in WDP, click on the button on the side, “Upd Kneeboard”. Now my question is: Is there any way to change the kneeboard pages while in BMS 3-D cockpit?
Alt p is the default key combo for Pilot Model. Check out BMS Keyboard Layout (US Int).pdf in your \Falcon BMS 4.34\Docs\01 Input Devices\01 Keyboard Layouts folder for the default US layout (unchanged from 4.33 layout except for 4.34 additions).
If that doesn’t work then you are not using the default keyfile, so you’ll need to find the callback in your keyfile and work out what it’s mapped to.
Look for a line something like this: SimPilotToggle -1 0 0X19 0 0X2E 4 1 “SIM: Toggle Pilot Model”
There is no way currently to change kneeboard pages in 3D.
-
@LorikEolmin
Empty you PM box -
US is a “visitor” in Korea. The teams are combined to one team and flights/packages are mixed.
This has always been the case in Falcon, nothing wrong.Gr Falcas
Does it mean you cannot use WDP to create kneeboards for US flights?
Day 1, 8:00+
I am sorry for noob questions, but once comms and stuff got complicated and 3D pilot model is standard for BMS 3D kneeboards can be very helpful.
-
-
Does it mean you cannot use WDP to create kneeboards for US flights?
Day 1, 8:00+
I am sorry for noob questions, but once comms and stuff got complicated and 3D pilot model is standard for BMS 3D kneeboards can be very helpful.
Select SouthKorea and you will find all your US flights.
Gr Falcas
-
Select SouthKorea and you will find all your US flights.
Gr Falcas
What can I say…
Thanks again!:-)