YAME64 suite
-
I got it working in 4.34 it when i disabled the 3Dhook option and changed the "exportRTT texture option in the BMS config to 0.
Maybe this helps
Like me. It go well but it need to have installed BMS 4.33 U1.
-
Also without 3Dook but g_bExportRTTTextures has to be “1” for me. As it says in the config file:
// This enables the shared texture memory area for HUD/MFDs/HMS/RWR/DED/PFL. This is independent from BMS external window usage
if it is “0” YAME server starts with an error dialogue.
You´r right, my fault :wfish:
has to be 1 instead 0 -
I have both 4.33 and 4.34 installed, i cant get it to work fullstop, what could i be missing guys?
-
I have both 4.33 and 4.34 installed, i cant get it to work fullstop, what could i be missing guys?
Not compatible right now. They are working on it
-
I have both 4.33 and 4.34 installed, i cant get it to work fullstop, what could i be missing guys?
The selected FALCON is 4.33 U5:; ; ; .
-
I have both 4.33 and 4.34 installed, i cant get it to work fullstop, what could i be missing guys?
I could not get it to work properly either until now, but that’s what I did to get it working.
Roccio has said that 3Dhook does not work (yet), that is crystal clear.
But I got gauges and MFD via RTT texture extraction working.
To do so the key was to configure BOTH versions (4.33 and 4.34) to export the MFDs via RTT texture extraction.
That means no 3DHOOK file present on neither the :\Falcon BMS 4.33\Bin\x64 nor the :\Falcon BMS 4.34\Bin\x64 folder (where the Falcon_Bms.exe files are)
set g_bExportRTTTextures 1 on both 4.33 and 4.34 falcon_bmas.cfg files
And of course falcon cannot be launched via the big “Launch Falcon BMS” button on YAME´s Run Tab.
This way YAME is extracting the MFDs and the gauges ok on my PC (server-client config)
I do not know if this works if only BMS 4.34 is installed.
I hope it helps
-
I could not get it to work properly either until now, but that’s what I did to get it working.
I hope it helps
This helps indeed!
I’ll mention it on the website as well until v2 is released! -
Hello, Question does the YAME works in Android tablets?
I would like to have in my knee as kneeboard a tablet with colour moving map like CPD software
-
This helps indeed!
I’ll mention it on the website as well until v2 is released!Well, to be honest I just summed up all the info, suggestions and hints given previously by other users…
Enviado desde mi H8324 mediante Tapatalk
-
I could not get it to work properly either until now, but that’s what I did to get it working.
Roccio has said that 3Dhook does not work (yet), that is crystal clear.
But I got gauges and MFD via RTT texture extraction working.
To do so the key was to configure BOTH versions (4.33 and 4.34) to export the MFDs via RTT texture extraction.
That means no 3DHOOK file present on neither the :\Falcon BMS 4.33\Bin\x64 nor the :\Falcon BMS 4.34\Bin\x64 folder (where the Falcon_Bms.exe files are)
set g_bExportRTTTextures 1 on both 4.33 and 4.34 falcon_bmas.cfg files
And of course falcon cannot be launched via the big “Launch Falcon BMS” button on YAME´s Run Tab.
This way YAME is extracting the MFDs and the gauges ok on my PC (server-client config)
I do not know if this works if only BMS 4.34 is installed.
I hope it helps
Better explained , but thats what i wanted to say as well
-
On page 67 of the current Yama manual it states that for the UFC to run correctly in Yama you need the correct BMS callbacks, but it does not list the callbacks. I am using the DX setup from 4.34 and below are the callbacks listed in the key for for the DX profile. I assume that these are sufficent for Yama when Yama gets updated to 4.34. correct?
SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 “======== 4.06 ICP ========”
SimICPCom1 122 0 0X3B 0 0 0 1 “ICP: COM1 Button - Push”
SimICPCom2 122 0 0X3C 0 0 0 1 “ICP: COM2 Button - Push”
SimICPIFF 122 0 0X3D 0 0 0 1 “ICP: IFF Button - Push”
SimICPLIST 122 0 0X3E 0 0 0 1 “ICP: LIST Button - Push”
SimICPAA 122 0 0X3F 0 0 0 1 “ICP: A-A Button - Push”
SimICPAG 122 0 0X40 0 0 0 1 “ICP: A-G Button - Push”
SimICPNav 122 0 0XE 1 0 0 1 “ICP: NAV Mode (no such button In Pit)”
SimICPTILS 122 0 0X4F 0 0 0 1 “ICP: 1-ILS Button - Push”
SimICPALOW 122 0 0X50 0 0 0 1 “ICP: 2-ALOW Button - Push”
SimICPTHREE 122 0 0X51 0 0 0 1 “ICP: 3 Button - Push”
SimICPStpt 122 0 0X4B 0 0 0 1 “ICP: 4-STPT Button - Push”
SimICPCrus 122 0 0X4C 0 0 0 1 “ICP: 5-CRUS Button - Push”
SimICPSIX 122 0 0X4D 0 0 0 1 “ICP: 6-TIME Button - Push”
SimICPMark 122 0 0X47 0 0 0 1 “ICP: 7-MARK Button - Push”
SimICPEIGHT 122 0 0X48 0 0 0 1 “ICP: 8-FIX Button - Push”
SimICPNINE 122 0 0X49 0 0 0 1 “ICP: 9-A-CAL Button - Push”
SimICPZERO 122 0 0X52 0 0 0 1 “ICP: 0-M-SEL Button - Push”
SimICPCLEAR 122 0 0X53 0 0 0 1 “ICP: RCL Button - Push”
SimICPEnter 122 0 0X9C 0 0 0 1 “ICP: ENTER Button - Push”
SimICPNext 126 0 0X4E 0 0 0 1 “ICP: NEXT Button - Push”
SimICPPrevious 126 0 0X4A 0 0 0 1 “ICP: PREVIOUS Button - Push”
SimICPDEDUP 120 0 0XC8 0 0 0 1 “ICP: DCS UP - Push”
SimICPDEDDOWN 120 0 0XD0 0 0 0 1 “ICP: DCS DOWN - Push”
SimICPDEDSEQ 120 0 0XCD 0 0 0 1 “ICP: DCS SEQ (Right) - Push”
SimICPResetDED 120 0 0XCB 0 0 0 1 “ICP: DCS RTN (Left) - Push”
SimDriftCO 121 0 0XB5 0 0 0 1 “ICP: DRIFT C/O Switch - Tog. ON/NORM!”
SimWarnReset 115 0 0X1C 1 0 0 1 “ICP: DRIFT C/O Switch - WARN RESET”
SimSetWX 122 0 0XB5 1 0 0 1 “ICP: FLIR - WX Mode”
SimFlirLevelUp 122 0 0XC9 1 0 0 1 “ICP: FLIR Rocker - Level Up”
SimFlirLevelDown 122 0 0XD2 1 0 0 1 “ICP: FLIR Rocker - Level Down”
SimSymWheelUp 116 0 0X4E 3 0 0 1 “ICP: SYM Wheel - Increase HUD Brightness”
SimSymWheelDn 116 0 0X4A 3 0 0 1 “ICP: SYM Wheel - Decrease HUD Brightness”
SimHUDPower 116 0 0X9C 3 0 0 1 “ICP: SYM Wheel - HUD Power - Toggle”
SimBrtWheelUp 116 0 0X4E 5 0 0 1 “ICP: BRT Wheel - Increase FLIR Intensity”
SimBrtWheelDn 116 0 0X4A 5 0 0 1 “ICP: BRT Wheel - Decrease FLIR Intensity”
SimRetUp 116 0 0X4E 6 0 0 1 “ICP: DEPR RET Wheel - Step Up”
SimRetDn 116 0 0X4A 6 0 0 1 “ICP: DEPR RET Wheel - Step Down” -
No, it does not work on android tablets.
-
Hello, Question does the YAME works in Android tablets?
I would like to have in my knee as kneeboard a tablet with colour moving map like CPD software
Yes it works! I use it with an app called “spacedesk”. I use for CPD works great! But YAME only works for BMS 4.33, need to wait 4.34 version.
-
I do not know if this works if only BMS 4.34 is installed.
I hope it helps
Cenzi no trabaja ya lo probé, tiene que ser con las dos versiones intaladas, me imagino que asi se engaña al JAME para que haga su trabajo, Jame tiene que direccionarse a algun Falcon para que funcione. Un abrazo amigo.
In english:
Cenzano don’t work, I tried it, it has to be with both versions installed, I imagine that like this JAME is tricked into doing his job. JAME has to address to some Falcon install to make it work. -
No, it does not work on android tablets.
However if you extended your desktop to your Android tablet you could create a window with the proper X,Y coordinates to the screen of the Android and put YAME gauges there. So you can do what you want but it takes setting up your android with screen extending software first, then windows will just see the android as just another monitor. There a lots of them out there.
Sent from my iPad using Tapatalk
-
I have everything configured, g_bExportRTTTextures 1, on both versions, I just can’t get data pulled to MFD’s etc. It’s like I am missing step? Is there anything I need to put in"get data from network", as you can’t use “hook”, I think data got pulled one time, but I didn’t know what I did, as it never returned. Thank you
-
You only use “get data from network” on a client not running on the same computer. That is why you also need an IP-Adress for this to work.
Maybe, but just maybe you have to configure the client to show server and client status. I noticed a bug where if i don’t include them in the view, nothing else will show up. Took me several hours to figure this out, on Linux and as well on Windows 7, but you might have a different problem.
-
I have everything configured, g_bExportRTTTextures 1, on both versions, I just can’t get data pulled to MFD’s etc. It’s like I am missing step? Is there anything I need to put in"get data from network", as you can’t use “hook”, I think data got pulled one time, but I didn’t know what I did, as it never returned. Thank you
Hi Scottd5800
I had similar issue on my side, although I’m running YAME locally i.e. getting data from BMS (not from the network server). I couldn’t get data from BMS, although I done all the settings according to the YAME manual. Having spent few hours on this issue, I simply re-installed the YAME. Now it works perfectly! Try it out, hope this will help you too.
-
I could not get it to work properly either until now, but that’s what I did to get it working.
Roccio has said that 3Dhook does not work (yet), that is crystal clear.
But I got gauges and MFD via RTT texture extraction working.
To do so the key was to configure BOTH versions (4.33 and 4.34) to export the MFDs via RTT texture extraction.
That means no 3DHOOK file present on neither the :\Falcon BMS 4.33\Bin\x64 nor the :\Falcon BMS 4.34\Bin\x64 folder (where the Falcon_Bms.exe files are)
set g_bExportRTTTextures 1 on both 4.33 and 4.34 falcon_bmas.cfg files
And of course falcon cannot be launched via the big “Launch Falcon BMS” button on YAME´s Run Tab.
This way YAME is extracting the MFDs and the gauges ok on my PC (server-client config)
I do not know if this works if only BMS 4.34 is installed.
I hope it helps
Works for me !
Great info, thanks ! -
My Yame is crashing on startup….:(