Kuwait Theater tester version 1 now available
-
Yes thank you. The problem is known.
It is observed at airfields near water.
I have long been looking for a way to fix this. It may be necessary to set the height of the earth on an aerodrome tile = 1 foot. I’ll try later.Hi SpbGoro!
You just have to make sure that the surronding tiles of the airfield are all set at the same height, on ALL four corners of each tile.
You can do that by using Monster’s Terrain Editor.
That way you make sure the terrain tiles are properly leveled, no matter their height.
Hope this info can be of some use to you.
Cheers!
-
@Nuno:
Hi SpbGoro!
You just have to make sure that the surronding tiles of the airfield are all set at the same height, on ALL four corners of each tile.
You can do that by using Monster’s Terrain Editor.
That way you make sure the terrain tiles are properly leveled, no matter their height.
Hope this info can be of some use to you.
Cheers!
Yes, all aerodrome tiles are installed at the same height.
For Ras Safania = 3 feet.
Set the height to 1 foot, the plane almost stopped drowning in the taxiing texture. The problem is in airfields located near the water, the height of the water = 0.@Nuno:
You can do that by using Monster’s Terrain Editor.
Oh yes, I’m working with this wonderful program only
All work with the landscape is initially done in version 4.33, with the subsequent transfer to 4.34. -
Hi. On the same AB please check taxi point for Rwy14. Because AI element will stop too far from rwy14 and will wait leader for start take off procedure. You need to add more taxi points so AI element can come closer to rwy14.
-
Yes, all aerodrome tiles are installed at the same height.
For Ras Safania = 3 feet.
Set the height to 1 foot, the plane almost stopped drowning in the taxiing texture. The problem is in airfields located near the water, the height of the water = 0.Make sure all tiles touching the AB tiles are at the same height also, even if this means some water tiles have to be elevated above zero.
-
Yes, all aerodrome tiles are installed at the same height.
For Ras Safania = 3 feet.
Set the height to 1 foot, the plane almost stopped drowning in the taxiing texture. The problem is in airfields located near the water, the height of the water = 0.Hi there.
Well just post me a photo of this airport from into the “Terrain Editor” program.
Of course just use the X and Y values of the airport insertion tile in order to focus on it.
Then move a little the tiles in order to center in your photo the insertion tile point.
I will let you know with which altitudes per which tiles you are gonna have the airport level ;).
Nikos. -
Hi there.
Well just post me a photo of this airport from into the “Terrain Editor” program.
Of course just use the X and Y values of the airport insertion tile in order to focus on it.
Then move a little the tiles in order to center in your photo the insertion tile point.
I will let you know with which altitudes per which tiles you are gonna have the airport level ;).
Nikos.Thank you, but no longer necessary. Malc’s method - works
even if this means some water tiles have to be elevated above zero.
-
This post is deleted! -
Can someone pls tell me what are the frequency of airbases in this theater ? I don’t find any doc
-
After made flight, join the flight, check briefing and there you will find all frequency.
-
After made flight, join the flight, check briefing and there you will find all frequency.
Hhmm… you can find out there those related to the flight you are currently going to fly, to be honest.
But the interesting question was about another matter, I guess, and needs more research… I’ll try to do my worse :lol: to answer to you, cypi.
Only keep in mind that it’s currently a WIP theater, so please be so kind and expect for the possibility of waiting for its official release to get those data you need to learn.And I have an update for you now: from what I was able to find out, there are actually no data available at your purposes, I’m afraid.
With best regards.
-
Yes of course it is related exactly to your flight. Of course if you dont have any doc about freq, and you want to know every airport, you can always open savexx.cam or te.cam in MC and check station+ils. You will find there every airport feq. But I am not sure it is so important for him to know every airport freq.
-
Here we have all airbases on blue side plus map.
-
Yes of course it is related exactly to your flight. Of course if you dont have any doc about freq, and you want to know every airport, you can always open savexx.cam or te.cam in MC and check station+ils. You will find there every airport feq. But I am not sure it is so important for him to know every airport freq.
It’s all correct, there.
So, this is just what I did with Mission Editor’s aid.
But unfortunately, as I have already told, there are no useful infos. We have the frequencies, but no related names, I mean… nowadays only, because Kuwait is currently at WIP state.Please be patient a little more… it’s a good habit, also in our Falcon world, you know.
With best regards.
-
It’s all correct, there.
So, this is just what I did with Mission Editor’s aid.
But unfortunately, as I have already told, there are no useful infos. We have the frequencies, but no related names, I mean… nowadays only, because Kuwait is currently at WIP state.Please be patient a little more… it’s a good habit, also in our Falcon world, you know.
With best regards.
Personaly I changed freq for GND,TWR,APR(DEP) , becasue sometimes is totaly mess on some airport if few flights trying to land in few minutes different. Example if you are on final (TWR) you can hear somebody on the GND or APR.
-
Then you did well to do so, mate.
Oh, another matter… take a look to this TE I’ve made to test some helicopters’ use in battlefield.
I hope you like it.
https://www.benchmarksims.org/forum/showthread.php?33175-Kamov-Ka-52K&p=513783#post513783
With best regards. -
Have been really enjoying this theater! Here’s a vid of some Mig and Sam dueling:
-
At the moment, due to the lack of free time, the progress of updating and changing is moving quite slowly.
Oil Spills - Northern Babiyan.
https://www.google.com/maps/place/Кувейт/@29.9524111,48.0661105,3516m/data=!3m1!1e3!4m5!3m4!1s0x3fc5363fbeea51a1:0x74726bcd92d8edd2!8m2!3d29.31166!4d47.481766
Failaka islan town
https://www.google.com/maps/place/Кувейт/@29.4426294,48.2860098,4731m/data=!3m1!1e3!4m5!3m4!1s0x3fc5363fbeea51a1:0x74726bcd92d8edd2!8m2!3d29.31166!4d47.481766
Dirty Lake Near Subiyah Thermal Power Plant
https://www.google.com/maps/place/Кувейт/@29.5492802,48.1552213,4068m/data=!3m1!1e3!4m5!3m4!1s0x3fc5363fbeea51a1:0x74726bcd92d8edd2!8m2!3d29.31166!4d47.481766
Rumaila Oil Refinery depot
https://www.google.com/maps/place/Кувейт/@30.6152131,47.3413206,4998m/data=!3m1!1e3!4m5!3m4!1s0x3fc5363fbeea51a1:0x74726bcd92d8edd2!8m2!3d29.31166!4d47.481766
King Khalid Military City
https://www.google.com/maps/place/Кувейт/@27.9817313,45.5441842,6368m/data=!3m1!1e3!4m5!3m4!1s0x3fc5363fbeea51a1:0x74726bcd92d8edd2!8m2!3d29.31166!4d47.481766
Ar Ruqi desert town
https://www.google.com/maps/place/Кувейт/@28.9804126,46.5828122,2782m/data=!3m1!1e3!4m5!3m4!1s0x3fc5363fbeea51a1:0x74726bcd92d8edd2!8m2!3d29.31166!4d47.481766
Electric Transformer station south
https://www.google.com/maps/place/Кувейт/@29.2046507,47.4313737,12092m/data=!3m1!1e3!4m5!3m4!1s0x3fc5363fbeea51a1:0x74726bcd92d8edd2!8m2!3d29.31166!4d47.481766
Also, after updating Windows, the game crashes to the desktop or hangs with an error, the reasons for which have not yet been found.
-
At the moment, due to the lack of free time, the progress of updating and changing is moving quite slowly.
As slow as it might be, you’re still sparing out some of your valuable free time to keep an eye on it, mate.
Thanks a lot for this.Also, after updating Windows, the game crashes to the desktop or hangs with an error, the reasons for which have not yet been found.
Interesting and odd at the same time this, Goro.
May I suppose you’re launching the latest version with all the updates made by you, right?
And may I help you in anything, even trying to see on my PC/system if that issue happens to me too?
My OS is Windows 10 Pro version 1903 updated on last August 13th, (KB4512508, OS build 18362.295).In case, I’ll be glad to.
With best regards.
-
:bdance:
-
Likewise, all the aircraft, especially on the Iraq side, still wear DPRK insignia. I need someone who is knowledgeable in skinning to change these. Are you that someone? The best… @Dema https://www.benchmarksims.org/forum/member.php?585-dema