A Guide to Morphine’s Profile for BMS 4.33 and Beyond
-
Awesome thanks!
-
Huge thanks man !
I couldn’t have Morphine’s settings to work, nor was I able to find any working profile, I was about to start mapping every button of the joystick and the throttle one by one… :faint2:
-
Hi Gastone,
Thanks for keeping Morphine’s profile alive :headb:
Excellent job. -
Hello,
I have tried to load in the profile but at the step “select Thrustmaster Combined” I can’t make progress since I do not have the option to select Thrustmaster Combined.
I have tried to just load the profile but either the stick completely unmapped or only the joystick was mapped but not the throttle… -
If i Remember Correctly, It will change to Thrustmaster Combined, if included Target Profile ist running before Starting Sim, right? God it´s been a while…
-
Under Windows 10 and newest TARGET software it shows as Thrustmaster Virtual Game Controller (root).
-
Under Windows 10 and newest TARGET software it shows as Thrustmaster Virtual Game Controller (root).
Not necessarily true. I get thurstmaster combine when I run the script. You need to make sure both target and the driver / firmware are up to date. If you’re running the latest version of target with the old firmware you will likely get thrustmaster Virtual Game Controller (root). As target will not recognize the joystick, resulting in failed run of target. When you get Virtual Root something has gone wrong.
-
Not necessarily true. I get thurstmaster combine when I run the script. You need to make sure both target and the driver / firmware are up to date. If you’re running the latest version of target with the old firmware you will likely get thrustmaster Virtual Game Controller (root). As target will not recognize the joystick, resulting in failed run of target. When you get Virtual Root something has gone wrong.
Has been that way since Windows 1909 update.
I’m only using TARGET on the throttle so that may have something to do with it.
Using the latest TARGET V.3.0.18.328 and stick firmware version 12, (F-18 grip), and throttle version 23.Everything works fine and the scripts run and complete ok.
-
Has been that way since Windows 1909 update.
I’m only using TARGET on the throttle so that may have something to do with it.
Using the latest TARGET V.3.0.18.328 and stick firmware version 12, (F-18 grip), and throttle version 23.Everything works fine and the scripts run and complete ok.
It works for you because, in the case of the morphine script, The majority of outputs for the throttle are keyboard commands. It’s the exception not the rule. There’s about 17 pages of trouble shooting here, plus a few dozen more PM’s. Most of which is because people can’t get target to properly unify the device. See if this work, unplug your hotas, restart the computer, once windows boots, try plugging the HOTAS into different USB ports, run target and see if you get thrustmaster combine. Sometimes that’s all it takes, because of the way Win 10 handles joysticks and registry entries.
Hello,
I have tried to load in the profile but at the step “select Thrustmaster Combined” I can’t make progress since I do not have the option to select Thrustmaster Combined.
I have tried to just load the profile but either the stick completely unmapped or only the joystick was mapped but not the throttle…Run the profile, then in the start menu, type Joy.cpl what joysticks are listed with the device running?
-
Greetings Gastone and thanks for your work. Been using the “pinky/paddle” swap profile. Great stuff. I’ve recently replaced my TFR pedals with the MFG ones.
Night and Day.
Just want to make sure which “Target”’ profile I should be using.
Is it the"Full" or “Full 5”? I read at the beginning of this thread that the “Full 5” cancels the new Thrustmaster pedals. Is that the one I should be using?
Thanks. -
Greetings Gastone and thanks for your work. Been using the “pinky/paddle” swap profile. Great stuff. I’ve recently replaced my TFR pedals with the MFG ones.
Night and Day.
Just want to make sure which “Target”’ profile I should be using.
Is it the"Full" or “Full 5”? I read at the beginning of this thread that the “Full 5” cancels the new Thrustmaster pedals. Is that the one I should be using?
Thanks.Run Full, you only need full 5 if you have the TPR pedals. The only reason there are two versions is because legacy versions of target wont’t work if you exclude the TPR in the script.
-
Gastone, thanks for all your support and excuse if the following issue is already covered. I just start using 4.34 and when I use “Boat Switch” to start DF mode it doesn´t work, even if a press through the keyboard D , C or M. I am using Target V.3.018.328 and I load there: Wartog BMS_ Full_swap.tmc, (I tried also WartogBMS_Full_4_434_Paddle.tmc). In BMS I am using: BMS_Full_&_Morphine_paddle_swap.key. I have a friend that have the same issue. Any idea of what is going wrong? thanks in advance
-
The Keyfile for the paddle swap had a bug. The keyfile wouldn’t load in game, which is why none of your keys worked. I updated the dropbox with a fix. Download the key file again, Reload it in BMS. Should be working.
Edit: The whole profile was messed up. I redid it all, it’s working again. Download and install everything, delete the old version. -
Thanks a lot Gastone. I just downloaded the file Morphine_434_Paddle.key as your suggestion and made a quick test in BMS. Still the same issue, the only way to activate the dogfight mode is to maintain press on D through the keyboard. In addition I can not block a target through TMS UP or the radios Through the “mic switich” also do not work propperly, it doesn´t matter if press the paddle or not, it alway ask to Awacs. In TARGET I loaded WartogBMS_Full_4_434_Paddle.tmc That is no there anymore, the only file I see is in dropbox for paddel switch is Warthog_BMS_Full_5_434_Paddle.tmc
-
Thanks a lot Gastone. I just downloaded the file Morphine_434_Paddle.key as your suggestion and made a quick test in BMS. Still the same issue, the only way to activate the dogfight mode is to maintain press on D through the keyboard. In addition I can not block a target through TMS UP or the radios Through the “mic switich” also do not work propperly, it doesn´t matter if press the paddle or not, it alway ask to Awacs. In TARGET I loaded WartogBMS_Full_4_434_Paddle.tmc That is no there anymore, the only file I see is in dropbox for paddel switch is Warthog_BMS_Full_5_434_Paddle.tmc
Just use the new files. Delete the old ones. Run the script. Hit the start button in windows. type joy.cpl. What joysticks do you see listed?
-
I just run Warthog_BMS_Full_5_434_Paddle.tmc and after I executed Joy.cpl and is listed: Thrumaster combined and T-Rudder. I went in BMS and still the same issue. I tried to use the radios and works ok. After I did the same to get in contact with Awacs using the paddle, after that the radios do not work, even not using the paddle when I push up or down the mic switch I get the awacs. About dogfight or blocking a target the same
-
Have you loaded the .key file in game? Page 1 goes over how to do that. You need both files for the profile to work.
-
Gastone, this is what I am doing:
1.- Run Target
2.- Load WarthogBMS_Full_5_434_Paddle.tmc and “run”
3.- Launch BMS
4.- Go to Setup and controller
5.- Load Morphine_434_Paddle and “apply”
The issues still remain. I tried to load the old file key: ( BMS_Full_&_Morphine_paddle_swap.key) with a size 89KB and the radios work fine, I can block with TMS UP but the dogfight mode still not work and the ext lights do not work with the pinky switch on the TQS -
Gastone,
I found the mistakes, my mistake :neutral:.
In BMS configuration in the section “hardware” it was enable “dogfight/missile override self cancel”. I disable it and dogfight mode works now perfectly. I think I am going to use BMS_Full_&_Morphine_paddle_swap.key because I was able to fix the other issues. I reasigned again the lights directly in BMS and now it works correctly. the same for the radios. I tried your new file (Morphine_434_Paddle.key) and radios do not work propperly, not able to switch with awacs as I mentioned. ALso I was not able to block targets througth the radar. -
I’ve gone through and updated Paddle Switch profile. It should make it more reliable. You should only need one Keyfile (the base morphine will work) from now on. All the paddley bits are handled through Target now. The BMS keyfile and the target script are in the dropbox . I’ve also deiced to stop keeping a version of the script for legacy version of Target. So no more full 4. I’ve found newest version for target along with firmware updates much more reliable on win 10. I can actually stop a script and not have it glitch the joystick now. Just make sure you update the firmware too. It’s a separate step from the driver install. See Page 2 https://images-eu.ssl-images-amazon.com/images/I/81hIXiPy5wS.pdf