JanHas Models & Skin Thread -Compatible with 4.36
-
This post is deleted! -
I have fixed the CM-50 (main wheel sticking through the doors (v2 package)) and released the CM-40 and pylons packages.
I also have added a ladder model for the 3d pit model. Adding the ladder to the cockpit wing model didn’t work so I added a separate model to the database and added a line (cockpitmodel3 2586;) to the “3dckpit.dat” of the specific 3d cockpit (“…\Falcon BMS 4.34\Data\Art\CkptArt\F-16CM-50” for example). When the canopy closes ladder moves to the ground. When the chocks are removed the ladder disappears altogether (and vice-versa). Just replace the 3dckpit.dat file with this one the extra line and install the model the same way as the other models.
-
Hello all,
JanHas, many many thanks for your awesome models. I really love the new ladder.
I installed the Block 40 and 50 with pylons and ALW on my test rigg (not my pit so far).
I have two question:- Is it normal that in the upper right corner “Exhaust Angle …” is shown?
- You mentioned that the models most likely are not working with seat shaker software and I recently bougth a JetSeat with SimShaker-Wings. Does anyone has experienced any issues in combination with the models? Otherwise I’ll do some test the next days.
Greetz and have a great evening,
Tweety
-
Hey Jan thanks for all the all work. What blocks are you working on right now?
-
Hi Janhas
Great work!! Will you be releasing an installer for all your models like you did for 4.34 when you are done updating?
-
HI JANHANS
I have issue when i accese to your site with mobile phone the new models that you have realesed appered like F16D HAF when i acces with the pc it disaaperd what is the problem ? -
Refresh, press F5.
-
it fied by itself thnx
-
New Aircraft Available JanHas’s Site
-
UPDATE - Blk-52 Ready to Rock N Roll
-
UPDATE - Blk-42 up and running
-
Hello all,
JanHas, many many thanks for your awesome models. I really love the new ladder.
I installed the Block 40 and 50 with pylons and ALW on my test rigg (not my pit so far).
I have two question:- Is it normal that in the upper right corner “Exhaust Angle …” is shown?
- You mentioned that the models most likely are not working with seat shaker software and I recently bougth a JetSeat with SimShaker-Wings. Does anyone has experienced any issues in combination with the models? Otherwise I’ll do some test the next days.
Greetz and have a great evening,
Tweety
-
The NVG is currently using the VTOL dof code. If you are not using the NVG’s you can change the "IsVtol 1
" to 0 (use Notepad++, not wordpad!). You can also press ctrl-` key and the entire text will disappear. -
Tweak the # IdleThrottle Chart till the # Nozzle Max Chart data so that data is like the original.
-
Jan Has F-16AM MLU-Nl is available for download
-
Janhas - F-16AM - RNoAF, RDAF, & RJAF….Also Blk-25 Available!!
Update AC-130U - Spooky Also Available
-
Thank you so much, Jan!!
But I have a problem! My F-16 block 25 is strange(Landing light and stores). Of course I can change my stores in LOADOUT screen but when I create the mission at the first, blk-25 is only strange but others is very good!!
Is there any solution for me?
https://drive.google.com/open?id=1VaBdWLtV98izCZquxXjqhegCfECOXor0 -
I made the block 25 work by setting up the .dat file like this……
#----------------------------------------------------- # Hardpoint data #----------------------------------------------------- numPODHardpoints 2 hardpoint1Grp 0 hardpoint2Grp f16-wingtip hardpoint3Grp f16-2/8 hardpoint4Grp f16-3/4 hardpoint5Grp f16-3/4 hardpoint6Grp f16-centerline hardpoint7Grp f16-6/7 hardpoint8Grp f16-6/7 hardpoint9Grp f16-2/8 hardpoint10Grp f16-wingtip hardpoint11Grp f16-5L hardpoint12Grp f16-5R hardpoint13Grp 0 hardpoint14Grp 0 hardpoint15Grp 0 hardpoint16Grp 0 #-----------------------------------------------------
However, the switch for the right side of the intake is not enabled for the pod to show up. I was going to post on the forum about it, but you kind of beat me to it. The default loadout for the F-16C Block 25 has the AN/AAQ-28 Litening pod on the right side of the intake. If you set your f16bk25.dat file like this, your loadout will look fine, but you will not see a pod on the right side of the intake if you do until Jan Has can fix the model to enable the switch on that side.
-
5 more models to update and then Ill make the install packs again for Korea, Balkans and Israel
F-16C-52+ EAF
F-16C-52+ & CFT HAF PXIV
F-16I & F-16I CFT
F-16DM-52
F-16DM-40 -
Nice cougar.
-
Back to the 80s with the good old block 25 in Bms 4.34!
Thanks Jan!
Grtz Polly -
HAF Block 50 Peace Xenia 2 up too.