Korea 2012 Megapack for BMS 4.34
-
Thank you for your reply. Finally I resolve the problem. And it works . Thank you very much. And I have another question. Is there any special setting to use Mission commander for Korea2012? Whenever I use mission commander, program asks me choose korea or Korea2012. If I choose Korea, it works but I can’t choose F35 and for Korea2012, got some error and unable to read the file.(ex: usable airplane is beyond its capacity. The slots are 191 but 2012’s slots are 195.
-
Thank you for your reply. Finally I resolve the problem. And it works . Thank you very much. And I have another question. Is there any special setting to use Mission commander for Korea2012? Whenever I use mission commander, program asks me choose korea or Korea2012. If I choose Korea, it works but I can’t choose F35 and for Korea2012, got some error and unable to read the file.(ex: usable airplane is beyond its capacity. The slots are 191 but 2012’s slots are 195.
I am not sure could be an issue with the Korea 2012 DB. When we get time, we wil do some more DB work to Korea 2012s DB.
-
Thank you for your reply. Finally I resolve the problem. And it works . Thank you very much. And I have another question. Is there any special setting to use Mission commander for Korea2012? Whenever I use mission commander, program asks me choose korea or Korea2012. If I choose Korea, it works but I can’t choose F35 and for Korea2012, got some error and unable to read the file.(ex: usable airplane is beyond its capacity. The slots are 191 but 2012’s slots are 195.
I have this same issue, can’t load any Korea 2012 campaign files in Mission Commander
-
the issue seems related to DB/file structure…the maga pack contains several “sub-theaters” like korea2012, X-plane, etc. Only korea2012 can use dedicated DB.
to restore MC compatibility, the DB and some files should be replaced with default KTO ones.
-
Even trying to load the Korea 2012 I get the following errors when trying to load in MC:Failed to load the UCD XML. This is then followed by: ValidAC.art has more entries than listed on top. Nr 192, items 195.
-
I was analyzing the database and so far I found one error:
in the UCD file there probably should not be the last register…In the register of 621 instead of entries
<vehiclectidx_0>2406 …
should be
<vehiclectidx_0>3560 …
In short
FLIGHT at index 621 should have F-CK-1C instead of F-16I CFT as elementsIn addition, FLIGHT index 622 has no entry in the Class Table.
After testing in the editor, the database did not show any major errors, but still the UCD file will not load in the MC (dunno why… :icon_e_surprised:
It may also be related to the fact that there are 426 aircraft entires in the database and there are 195 entries in the VALIDAC.ACT file (in this note there is an error at the beginning of the file - 192 are entered there)
There are 208 entries in the teplanes.lst file.
Im not good with editing this database (i.e. adding new planes - im still trying) but I hope that I helped at least slightly to solve the problem…</vehiclectidx_0></vehiclectidx_0>
-
the issue could be fixed by reverting back to using default KTO DB/files. ( and lose new ac, F14/22 3d pit )
Replace Korea2012 folder/files with default KTO ones:
-terrain\objects whole folder.
-Sim whole folder.
-art\dgft\userids.id
-art\main\textids.id
-art\main\lcktxtrc.irc
-art\common\acicons.irc
-art\main\imageids.id
-campaign\save\te-planes.lst tenavalunit.lst teunit.lst
-campaign\save\validac.act -
Thanks. I have figured out how to load the campaign with MC using the default KTO DB, however obviously we can’t take advantage of the new DB. Any way as how to add units (or modify them once added) for aircraft using the new Korea 2012 DB. I’d love to use some of the J-10s in the DB!
-
Im trying to do that but it is really hard to understand connections between files and DB entires without any documentation. I.E. o dont know (yet) what means ID column in validac.ac (if i have good remember of filename -im away from my main PC)
Next things are c-pits… Ive made some tests on stock KOREA KTO with F-22 yesterday but with partial succes… I men all Metalhead models (including c-pit) were applied proprerly but there wasnt any display functioning except HUD.
Problem is (probably) with MFD lod - there si attached texture with number 9999 but max number of texture in OBJECTS is 9012
Anyway ill will keep trying (unfortunatelly slowly) -
This theater has a bad database. The Unit file has illegal characters and this is the reason why it can’t load the Xplane database.
A new version of MC has been released and should be able to load the database even with these errors.But do fix these issues as well
Gr Falcas
-
This theater has a bad database. The Unit file has illegal characters and this is the reason why it can’t load the Xplane database.
thanks for new MC.
FYI the “bad database” is exclusively built for Korea2012, not for other korea mods in this "korea2012 mega pack. btw none of the mods tweaked to fully use the bad database.
-
There are multiple cases of wrong characters in the Falcon4_UCD.XML.
Here is an example (used notpad++) and do notice the black outlined text.
This is for ElementNames as well as Descriptions. Rename those or remove them.
There are more than only this example.Gr Falcas
-
great! thanks!
-
Can’t seem to get weapon delivery planner to play ball with these theatres, any ideas?
Im fairly new to falcon so I might be missing something obvious. -
Just flew a carrier war campaign on your map. AMAZING. Downtown over Pyongyang in a rhino was intense.
-
-
-
Installed Korea 2012, as I have done many times with other theaters. But something is wrong. When switching to the theater, Falcon is overloaded, but the theater does not work - tell me what happened? I did this many times before and everything worked.
-
This post is deleted! -
Hello! Thanks for good proglam. And I have a question about F35. I want to make a SQ for F35A ROK at Cheongju base by using Mission commander, but there has no F35 series in MC. Korea 2012 is unable to control by using MC?
Thanks and beware of Covid19.