Weapon Delivery Planner released
-
I’m having a problem using WDP with 4.33 U1.
When I launch WDP I get an;
’ *:\Falcon BMS 4.33 U1\data\Campaign\SAVE\radiomap.dat’ ’ error. WDP is working well with both 4.34 and .35.
When I check said directory there is no radiomap.dat file. Why is this not being created? Fresh install of BMS all 3 versions.
I have deleted my current pilot and created a new but still getting the same error. Any thoughts and help please.
WDP Version 3.7.16 build 152
Best regards.
Fubar
Hey,
This is a file which belongs to BMS install. However, this was not included in 4.33.
Only versions about 4.33 have this included and so it is working as you describeJust press “OK” and continue.
Gr Falcas
-
Is there a way to add Somalia to WDP?
-
Hi Falcas. I’ve noticed that in the AAR training mission (TR_BMS_005_AAR) in BMS 4.35 U1, the tanker preset is missing when I look in DTC > Radio/Nav. It’s been replaced with the Guard frequency and says Guard in the comments. Have I done something wrong or missed something?
Also, is there a way to include the preset numbers on the datacard for reference when in flight?
Also, also…. for that training mission, no ATIS information is shown on the datacard.
-
Is there a way to add Somalia to WDP?
Sure, just add it to the Airport database which comes with WDP.
You need to add the Theater, Country and all the Airports in the according XML files.Gr Falcas
-
Hey,
@scubapics:Hi Falcas. I’ve noticed that in the AAR training mission (TR_BMS_005_AAR) in BMS 4.35 U1, the tanker preset is missing when I look in DTC > Radio/Nav. It’s been replaced with the Guard frequency and says Guard in the comments. Have I done something wrong or missed something?
Yep, looks like you are missing something, Just joining the mission and taking a seat in an aircraft does not save the DTC.
So the DTC remains the same as what it is. WDP will load the DTC and shows you what is in it at the current time.Did you save the DTC before you loaded the mission in WDP?
Also, also…. for that training mission, no ATIS information is shown on the datacard.
This depends on the TWX file. Need a little fix as the TWX version for this mission is pretty old.
Gr Falcas
-
Also, is there a way to include the preset numbers on the datacard for reference when in flight?
You don’t want to have the presets on the datacard. You know that automatically ground is always 2 and tower is always 3, your tanker might be on 13.
But you can mess up your DTC and the presets are not saved correctly. So you want to know what the actual frequencies are (Yes presets are just stored frequencies)
Or what is you want to go to tanker B or C and the preset is set to tanker A… you want to know the frequency, not a preset.Gr Falcas
-
Hey,
Yep, looks like you are missing something, Just joining the mission and taking a seat in an aircraft does not save the DTC.
So the DTC remains the same as what it is. WDP will load the DTC and shows you what is in it at the current time.Did you save the DTC before you loaded the mission in WDP?
This depends on the TWX file. Need a little fix as the TWX version for this mission is pretty old.
Gr Falcas
Hi Falcas. Thanks for your time. I opened the DTC and saved it before opening WDP and loading the training mission. I’ve attached some screenshots. You can see what’s in the DTC and then in WDP UHF preset 13 is “guard” and set to the guard frequency rather than “Tanker/AAR” and the tanker frequency.
-
Just before TvT round 4 kicks off… New version released.
https://www.benchmarksims.org/forum/showthread.php?5293-Weapon-Delivery-Planner&p=66013#post66013It fixes some issues for this event as well as a couple of new features.
Enjoy,
Falcas -
Want to be rdy for TvT4, updated WDP, but got this error. How to resolve??
.NET4 and VisualC are okay.
Thx Vordy
-
Want to be rdy for TvT4, updated WDP, but got this error. How to resolve??
.NET4 and VisualC are okay.
Thx Vordy
Same error here…. just overwrote it with the previous Weapon_Delivery_Planner_3.7.15.150 and i’m running again.
-
Want to be rdy for TvT4, updated WDP, but got this error. How to resolve??
.NET4 and VisualC are okay.
Thx Vordy
In your pic, if you click on details… I can see where the issue might be
-
In your pic, if you click on details… I can see where the issue might be
Reinstalled for you!
************** Exception Text **************
System.MissingMethodException: Method not found: ‘FeatureEntry[] BMSUtils.FeatureEntryDataTable.LoadFED(System.String, System.String, Boolean ByRef)’.
at WeaponDeliveryPlanner.fclsMain.LoadDatabase()
at WeaponDeliveryPlanner.fclsMain.SetTheater()
at WeaponDeliveryPlanner.fclsMain.fclsMain_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
–--------------------------------------
WeaponDeliveryPlanner
Assembly Version: 3.7.15.150
Win32 Version: 3.7.15.150
CodeBase: file:///d:/Downloads/BMS%204.35/WDP/WeaponDeliveryPlanner.exeMicrosoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 14.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dllSystem.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dllSystem
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4300.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dllSystem.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dllSystem.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4190.0 built by: NET48REL1LAST_B
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dllSystem.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dllSystem.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dllAccessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dllSystem.Runtime.Remoting
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dllBMSUtils
Assembly Version: 1.6.3.38
Win32 Version: 1.6.3.38
CodeBase: file:///d:/Downloads/BMS%204.35/WDP/BMSUtils.DLLSystem.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4270.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dllSystem.Transactions
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dllSystem.EnterpriseServices
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dllSystem.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dlldbwdp
Assembly Version: 1.6.0.2
Win32 Version: 1.6.0.2
CodeBase: file:///d:/Downloads/BMS%204.35/WDP/dbwdp.DLLBMSLocation
Assembly Version: 1.0.4.0
Win32 Version: 1.0.4.0
CodeBase: file:///d:/Downloads/BMS%204.35/WDP/BMSLocation.DLLSystem.Web
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4330.0 built by: NET48REL1LAST_B
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dllLzssManaged
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///d:/Downloads/BMS%204.35/WDP/LzssManaged.DLL************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.For example:
<configuration></configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box. -
New version works fine here on “4.35”
Falcas, the new version of WDP also picks up the correct tanker frequency/preset in the DTC Radio/Nav page for the AAR training mission also it still labels it as “Guard”.
ATIS is also showing now.
Thanks for all your efforts.
-
This post is deleted! -
In your pic, if you click on details… I can see where the issue might be
Here you go Falcas …
Might be the same details as Icer has posted, but just to be sure:See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.************** Exception Text **************
System.ArgumentException: Argument ‘Start’ must be greater than zero.
at Microsoft.VisualBasic.Strings.Mid(String str, Int32 Start, Int32 Length)
at WeaponDeliveryPlanner.clsStringHelper.CutFirstWordCsv(String Line)
at WeaponDeliveryPlanner.clsLoadDTC.GetCallsignNavOffsets(String fName)
at WeaponDeliveryPlanner.clsLoadDTC.LoadCallsign(String fName, Boolean Version)
at WeaponDeliveryPlanner.cntDTC.GetCampFile()
at WeaponDeliveryPlanner.fclsMain.fclsMain_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4300.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
–--------------------------------------
WeaponDeliveryPlanner
Assembly Version: 3.7.17.161
Win32 Version: 3.7.17.161
CodeBase: file:///F:/WDP/WeaponDeliveryPlanner.exeMicrosoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 14.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dllSystem.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4270.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dllSystem
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4300.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dllSystem.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dllSystem.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4190.0 built by: NET48REL1LAST_B
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dllSystem.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4320.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dllSystem.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dllAccessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dllSystem.Runtime.Remoting
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dllBMSUtils
Assembly Version: 1.6.3.38
Win32 Version: 1.6.3.38
CodeBase: file:///F:/WDP/BMSUtils.DLLMicrosoft.VisualBasic.resources
Assembly Version: 10.0.0.0
Win32 Version: 14.8.4084.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic.resources/v4.0_10.0.0.0_nl_b03f5f7f11d50a3a/Microsoft.VisualBasic.resources.dlldbwdp
Assembly Version: 1.6.0.2
Win32 Version: 1.6.0.2
CodeBase: file:///F:/WDP/dbwdp.DLLSystem.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4270.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dllBMSLocation
Assembly Version: 1.0.4.0
Win32 Version: 1.0.4.0
CodeBase: file:///F:/WDP/BMSLocation.DLLSystem.Web
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4330.0 built by: NET48REL1LAST_B
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dllLzssManaged
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///F:/WDP/LzssManaged.DLLLzssNative
Assembly Version: 0.0.0.0
Win32 Version:
CodeBase: file:///F:/WDP/LzssNative.DLL************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.For example:
<configuration></configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box. -
Here you go Falcas …
Might be the same details as Icer has posted, but just to be sure:Thanks,
Nope, this is not the same. But the good news, this issue is fixed.
Will get a quick fixed release soon.@Icer, The error you get is really strange. Can’t even tell you why you get that one.
gr Falcas
-
Thanks,
Nope, this is not the same. But the good news, this issue is fixed.
Will get a quick fixed release soon.@Icer, The error you get is really strange. Can’t even tell you why you get that one.
gr Falcas
LOL… of course it’s strange! I’ll give the next version a shot, for now 3.7.15.150 works just fine…
-
Want to be rdy for TvT4, updated WDP, but got this error. How to resolve??
.NET4 and VisualC are okay.
Thx Vordy
https://uploads.tapatalk-cdn.com/20210304/48c99a5803d55a81a11945d76fa5a8a1.jpg
Hm 4.34 local install. Won’t work with TvT unless you have a 4.35.1 installed as well
-
But the good news, this issue is fixed.
Will get a quick fixed release soon.Highly appreciated Falcas, many thx
-
New version available.
Didn’t changed the website and all that stuff, just re-download the package and check if it has build number 162.
gr Falcas