FoxVox Free voice control software for BMS
-
@njenga5 You bet, and thanks - hope you like it!
-
Having an issue with PTT function.
Have set up the PTT in global settings and mapped the keys.
But it’s not working for some reason, can see that voice is being heard but get the constant Push-To-Talk preventing message on every command.
Tried setting the PTT sounds up and they appear to not not work either.
Have tried different keys/buttons/controller etc but always the same issue.
Any ideas? -
@TxMtb you also have to set PTT in each group. It is one of the little buttons on top of the group.
-
@Le_Beau Just tried that, didn’t work either unfortunately. Probably something easy missing on my side.
Edit: My bad, was assigning 2 push to talk buttons and it wouldn’t work, assigning 1 only and it works.
-
This post is deleted! -
Hm, that’s weird. I have my PTT config set to pinky / comms forward and it works perfectly.
Cheers, Uwe
-
@hoover While trying to narrow it down tried just keyboard with the M key, it worked, set up M key and throttle, (Warthog), mic sw up, neither worked then.
Tried just mic sw up, and it worked, added M key with it and again neither worked.
Goal was to have mic sw up and down to activate ptt. But neither work when both are there. -
-
@hoover Usually run TARGET on throttle only but have also tried without it running.
Did figure out that when 2 PTT’s are entered, if you press them both at same time, it works. But either or does not. Maybe it’s just how the coding is. Really like the simplicity of the program and it works very well.Tried using 1 button on throttle and 1 on joystick as you said and still same thing happens. But if I press both at same time it works.
-
@TxMtb You are correct, the software is programmed to require all PTT keys - not either/or. I can easily add an option to allow any key defined on the PTT to work rather than requiring all of them if that would help you.
-
@foxster Ahhh, that makes perfect sense then! Thanks for the info, can quit scratching my head now…
Pretty sure I can work this out with the individual command group PTT settings.Thanks again for your reply sir!
-
-
Hey foxster,
I’m just trying out the latest release, and I’m seeing a lot of invalid voice recognition attempts from foxvox when it shouldn’t even be listening (with “push to talk” enabled).
would it be difficult to turn off Voice recognition completely when PPT is enabled and the button combo is not pressed? that’s the only time I want foxvox to listen for commands, it should be turned off / inactive / not attempting to make sense of all other sound inputs when the PTT button is not pressed / active.
All the best,
Uwe
-
@hoover That became a little tricky when I added ptt independently to individual voice groups because you can have some with ptt and others without. I needed to see when a command was rejected due to ptt vs not recognized. I’m thinking maybe the best thing would be to add a logging option to enable logging when a phrase is rejected due to ptt with the default being off. The truth is that phrases are constantly evaluated either way, it’s just a visual cosmetic but I can see why you’d want it off, although sometimes it’s better on. Thanks for the suggestion.
-
Just a little suggestion / improvement: Would it be possible to save the main window position and size upon exit and restoring those values on startup? Thanks!
All the best & thanks for your consideration
Uwe
-
Fantastic that you are still developing this, Foxstermeister…!
Regardless of your wonderful tool, your posts paint you as a top bloke to be sure…!
Cheers to you.
-
@hoover Sure, I’ll add it to the update list.
-
@foxster hello,just a note for ya,scince the update to .1, the librarys are not correct anymore.
Found that today while ordering attack targets and my response was clear my six.
Some keys changed. -
@oldtommyboy Refer to the BMS-Comms-Nav-Book.pdf page 34 and you can see the changes that they made to the radio menus.
Had to go in and adjust the commands to get everything lined up again. The Weapons Free AA and Weapons Free AG shifted everything down by 1 after those. The Weapons Free command used to just be 1 command. -
@TxMtb yep,i know,thx
-
@foxster ok,im trying to edit the words "new voice command " but i cannot edit it.
What am i missing,sheez…
When i click on add voice commands and the new voice command window opens, i can set the voice keys and the output commands,just cant change the title box, what the hell am i missing.