IFlyBMS
-
Ahh okay thx…:o
-
Dave arnold gave me a beta, and the 5.2.007 version is now working fine.
I hope he will make it official soon
-
Same problem here. Do you think I could also get a functioning beta?
-
I am hoping that Dave Arnold will be releasing it as standard version soon.
My beta will expire in 36 days.
I just cant give it to you, as you must have a testflight account, and be validated by Dave. It installs directly, without the appstore or itunes.
i’ve tried contacting Dave lately, but he hasnt been answering for a week
-
Thx, Shung. Don’t worry I’ll try to be patient
-
Hang in there Judy. Had you contacted me earlier, I would’ve given your email to Dave too… but at this point it’s probably best to wait. Sorry about that, but that’s how it goes unfortunately.
-
Hang in there Judy. Had you contacted me earlier, I would’ve given your email to Dave too… but at this point it’s probably best to wait. Sorry about that, but that’s how it goes unfortunately.
Don’t be sorry, Ice. I’m already very grateful and happy with iFlyBMS as it is. It can only be better.
Thx. -
Made a little update to IflyBMS, just for me, but I can share if ICE agrees… you may have to update your keystroke file for callbacks though, because i modified a couple of inputs sent… (for example i fixed the ICP SYM (working with F7 and F8 now, as well as the RET DEPR rotary)
As i use the Ipad on a horizontal mode, i wasnt satisfied with having to scroll up and down in IflyBMS ICP to find certain controls… Ice told me he would make one, but he obviously has been busy So, with my little knowledge of touch control, i fooled around until i understood a little how it works… I havent understand a lot yet, but still i was able to empirically manage to create a working, new version of the ICP, in horizontal mode.
This is what it looks like
and you just have to scroll down to find the charts link, and the DATA card link. I was out of room, and I felt these didnt belong directly on my cockpit anyway… Another compromise is that I had to place the F-ACK button somewhere on the ICP, where you dont have any active control anyway.
thanks for this great software Ice !!!
-
Hey Shung, nice work. If you are happy to share this profile then do so by all means! I’m sure a few folks would greatly appreciate it.
Apologies for not being able to do this as my efforts have been directed elsewhere. Thanks for stepping up!
-
Ice.
I might like to make an improved version, with more panels and switches. Maybe by downsizing some of them.
I have two questions for you.
What font are you using for the panel writings.
How hard is it to create a new buttons/switch ? Could you quickly explain ? I plan on using the same switches graphics you have already created. I just don’t really know how to create a new switch, with it’s own input and it’s active area.
Thanks a lot
-
It’s easy enough once you get to it to be honest. The hardest part is getting them all to fit.
Tell you what… if you can figure out the actual real-estate size of the horizontal layout on the iPad, and using Photoshop or some such program, draw me a layout of what you want and where and how it all fits together. If I only need to “assemble” this and not “figure out” which goes where, I can do it on a weekend or so. It was the grouping, arranging, and “fitting” of the switches and buttons that took the most time for me.
Send me a PM or email (better!) and I’ll get it sorted.
-
well, this is what i am working on ICE…
i still have to think about what important toggle switches or rotaries I can implement in the top left panel though
Im struggling on how to create a new switch, and I would appreciate some help. just give me a few clues, and I should work this out. By what am I to start ?
I noticed that for each toggle switch, there is a label (starting position, to witch i can affect an image from the toggles section) and then 2 or 3 positions (AHK) and then a GP…
I just dont know by what to start…
My idea was to simply duplicate an existing toggle (such as the one used for the autopilot) and then modify the inputs it sends, but I am unable to do this.
can you help me ?
-
Ok… i know understand how to create all this thinks (AHK, LABEL, GP) and how to assign gestures to each of them… What I would like to understand is how i can visually make them appear on the layout !!! I know how to change the image of an existing one, but not how to make a new created one visually appear !!!
thanks !!!
-
damn, just dragging it on the screen !!!
Im starting with the speed type (CAS TAS, GND SPD) toggle, as it should work exactly as your Autopilot Left toggle… so basically i am copying what there is there.
ETA:
ok, now I managed to drag the speedtype label AND the GP on the layout… I can see them, and they work on my IPAD… (they send the input)… but problem, they dont update their visual position. I litteraly copied the “set data” from your APLef toggle, and mine is Speedtype toggle… So i have:
SpeedType (label)
SpeedType (GP)
SpeedTypeDown (AHK<)
SpeedTypeMid (AHK<)
SpeedTypeUp (AHK<)Each of the label and AHK has its corresponding toggle image too
What am i to do with the 3 AHK I created for my speedtype ? Do i have to drag them on the layout too ???
-
damn… my mid and down inputs work (sending imputs, but no visual position update on the IPAD either), but the "u"p keeps giving me a timeout, and this message error…
its more complicated than i thought…
-
Lol, you lost me there Shung. But yes, there’s more there than just copying the switches over
-
Lol, you lost me there Shung. But yes, there’s more there than just copying the switches over
no problem. its working now. Didnt know why it was giving me this error. Anyway, switches were not working because I once dragged all 5 things instead of just the LABEL and GP
I have added 5 toggleswitches yet (FLCS NORM/OVRD , Altimeter type, Hud brightness mode and Test step)
I think I will add one more line on top right.
Its easy once you understand how it works, but it takes some time.
I am admirative for all you have done !
-
Hello Shung,
Would this become available for public use later on?
@Ice,
Is this something you would consider for Helios? -
this is what it looks like so far !
I think im gonna split the CRS HDG QNH and HCMS in a line instead of a column, so that I can add another row of 4 switches above the 4 I just created.
Im using ARIAL as a font, which is close to yours, but not exactly. If you can tell me what font you are using, im gonna fix it.
Also, I am thinking of making the Master Arm, laser etc panel half that size, so i can add another pannel there.
Maybe you can give me an information… If i downsize the LABEL button, will it automatically downsize the corresponding feedback image called ? lets say the label shows the toggle at the mid position… if i downsize this one, when i switch the toggle up, and the up toggle appears, will it be automatically downsized to the size of the label ?
-
this is where I am at now… Ill finish thise toggle switches tonight, and then go to bed