Weapon Delivery Planner released
-
Hi Krikalev,
Mission should be created/changed in Falcon itself. So place/change/add/remove your stpts in Falcon. When you are done with your basic mission planning, start WDP and there you can do the reset.
Gr Falcas
-
Thanks Falcas!
-
BUG report:
in DTC>>WEAPON>>AIM-120 target size.
it is wrong about LARGE & SMALL.in DTC>>WEAPON>>A-G bomb profile2
C2 burst alt, it change to 5000 every timein DTC>>SYSTEM>>ICP
wingspan has no effect in game -
Hi Falcas,
I think there is a bug here.
If I select TOSS parameters in VIP mode like this:
in the datacard page, Attack Type is wrong (shows TOSS VRP) and Delivery Data is wrong too:
If I check Nav Offsets in DTC, VRP is selected.
If I change the rotary to VIP, data don’t change in datacard page, Attack Type. In TOSS mode, allways VRP TOSS is showed.
IF I go again to TOSS screen to check that VIP is selected and then return to Nav Offsets in DTC, VRP is marked again.
In short, when TOSS VIP is selected, data is displayed wrong in datacard page, Attack Type and Delivery Data.
HADB and PopUP I think is right.
Thanks!!!Hi Ender,
I have to check this.
Gr Falcas
-
BUG report:
in DTC>>WEAPON>>AIM-120 target size.
it is wrong about LARGE & SMALL.in DTC>>WEAPON>>A-G bomb profile2
C2 burst alt, it change to 5000 every timein DTC>>SYSTEM>>ICP
wingspan has no effect in gameHi Gear5,
Yep, the Large and Small is swapped. Fixed in next release.
C2 BustAlt, which version of WDP are you using? I have checked it and all works fine.
Wingspan, This is a bug in BMS, not WDP.Gr Falcas
-
Hi Gear5,
Yep, the Large and Small is swapped. Fixed in next release.
C2 BustAlt, which version of WDP are you using? I have checked it and all works fine.
Wingspan, This is a bug in BMS, not WDP.Gr Falcas
v3.47, i change BA to 2000, save, quit, open WDP again, it back to 5000. and AD stay 1.5
maybe u could add a small text after “wingspan”– “N/I not implement”, so no new guy bother u again. -
when I try to manually enter coordinates in the DTC page PPT. Get this error.
Thanks Falcas, by the WDP
P.D
The error is always repeated and references the last SA introduced. -
I don’t see any error? I do see a question.
But I already see what the problem is. Will fix this.gr Falcas
-
v3.47, i change BA to 2000, save, quit, open WDP again, it back to 5000. and AD stay 1.5
maybe u could add a small text after “wingspan”– “N/I not implement”, so no new guy bother u again.I can’t reproduce it and works fine here. Make sure that WDP has the loaded the same callsign.ini when start.
Setting wingspan to N/I makes no sence at all. As it is implemented and has worked fine. BMS just needs to be checked.gr Falcas
-
Hi Guys,
Hi Falcas,I do seem to have a problem when loading some TE ( TAC ) missions with WDP.
I create some TE for training purposes ( screenshot 1 ), but when trying to load them with WDP, I can’t get or see some packages. ( screenshot 2 )
They work fine in BMS.
It does seems that it only loads 1 FLAG or TEAM.
When trying to search for the package it results in a error : Not find in this country - Change country, …. ( see screenshot 3 )I’ve been searching on the forum and manual for it, but haven’t find any clue as to fix this.
Txs in advance for any valuable feedback,
Brgrds,Frederic
SCREENSHOT 1
SCRRENSHOT2
SCREENSHOT3 -
Hi Guys,
Hi Falcas,I do seem to have a problem when loading some TE ( TAC ) missions with WDP.
I create some TE for training purposes ( screenshot 1 ), but when trying to load them with WDP, I can’t get or see some packages. ( screenshot 2 )
They work fine in BMS.
It does seems that it only loads 1 FLAG or TEAM.
When trying to search for the package it results in a error : Not find in this country - Change country, …. ( see screenshot 3 )I’ve been searching on the forum and manual for it, but haven’t find any clue as to fix this.
Txs in advance for any valuable feedback,
Brgrds,Frederic
Hi Frederic,
Have you taken a good look at your TE, I mean in BMS itself?
Look at your teams??? Give them a propper name first.Gr Falcas
-
Hi Falcas,
Are the names and/or syntax relevant ?!
Never tought this would be the problem, as the TE works fine in BMS.
Of course I’m also a newbie, but did manage to put quick and dirty TE together for training purposes.
At least they do what I’m looking out for and not representative of any WAR strategy.
This one build around 2 Teams with victory conditions set to train at dogfigthing ( with Guns ) against some slower Warthogs and having if needed an escort for clearing my six.
I will change the names and try again.
To avoid making the same error, what should I look out for when giving names ?!
Once again txs for your quick reply and help.Met vreindelijke groeten,;)
Frederic -
Hi Falcas,
Are the names and/or syntax relevant ?!
Never tought this would be the problem, as the TE works fine in BMS.
Of course I’m also a newbie, but did manage to put quick and dirty TE together for training purposes.
At least they do what I’m looking out for and not representative of any WAR strategy.
This one build around 2 Teams with victory conditions set to train at dogfigthing ( with Guns ) against some slower Warthogs and having if needed an escort for clearing my six.
I will change the names and try again.
To avoid making the same error, what should I look out for when giving names ?!
Once again txs for your quick reply and help.Met vreindelijke groeten,;)
FredericIt is not just the syntax, but what did you do that you ended up with team names Team #1 and nothing?
How did you manage to do that??? (Yes I know the anwser)
But just build your TE using BMS itself and it will save you a lot of troubles.Gr Falcas
-
Hi Falcas,
Got the message.
Will definitely put the effort of building them from scratch each time.;)
Txs for your valuable feedback,
MVG
Frederic -
Hi,
I’ve just download the latest version of WDP but i have noticed a slight issue. When i try to print or save my datacard the map is missing. Don’t know what’s wrong. All worked fine before. Anyone had the same issue?
-
Hi,
I’ve just download the latest version of WDP but i have noticed a slight issue. When i try to print or save my datacard the map is missing. Don’t know what’s wrong. All worked fine before. Anyone had the same issue?
Hi Rich,
Have a look at the “AttackType” line on the datacard (right side)
If that says “else”, click on it and choose one of the buttons that will appear. (Popup, HADB, TOSS or None)
That will solve it.Gr Falcas
-
That fixed it. Thanks Falcas and thanks for this great software.
-
Loaded WDP and love it but I have a problem. When going to DTC or any other sub page, a quarter of the page is cut off on the right side and there is important data I can’t see. How can I fix this issue to get a full screen where I can see all the data. I have already tried removing and reinstalling the program.
-
Second question; how do you load MissionCommander Version: 0.3.3.0 from the zip file/ to what folder……?
-
Loaded WDP and love it but I have a problem. When going to DTC or any other sub page, a quarter of the page is cut off on the right side and there is important data I can’t see. How can I fix this issue to get a full screen where I can see all the data. I have already tried removing and reinstalling the program.
what screen resolution are you using?