Mission Commander beta release
-
A page that links me to a program I already have?
-
@Dead:
A page that links me to a program I already have?
That is hard to believe, as it has just been updated to 0.3.4.0
Gr Falcas
-
Editedā¦ā¦
Last page refresh spat it out. I see it there now
-
I donāt think you can do this with with TacEdit. There is a function āRebuild Squadronsā, but it only makes sure that the change you made to a squadron will actually work.
Can you explain what/when the list will be a problem for you?Gr Falcas
Now Iām in front of TacEdit, and the function I meant in my previous post was exactly āRebuild Squadronsā.
In āCampaignā->āAirbasesā tab I can review all the squadrons and make changes to patches, their base location, etc. and I can see all these changes in BMS in the map on the campaign selection screen.
In MC I can see the various records, but canāt delete/alter them, in tacedit I can edit them, but canāt delete them.
Itās really not an essential feature and I can live without it, but I would like to be able to edit these fieldsEDIT: Big thanks for the new version btw!
EDIT2: Also I have another feature request (I promise I will shut up after this one), is there a way to export a couple of unit instead of the entire list? (maybe I canāt find it though)
-
Now Iām in front of TacEdit, and the function I meant in my previous post was exactly āRebuild Squadronsā.
In āCampaignā->āAirbasesā tab I can review all the squadrons and make changes to patches, their base location, etc. and I can see all these changes in BMS in the map on the campaign selection screen.
In MC I can see the various records, but canāt delete/alter them, in tacedit I can edit them, but canāt delete them.
Itās really not an essential feature and I can live without it, but I would like to be able to edit these fieldsEDIT: Big thanks for the new version btw!
EDIT2: Also I have another feature request (I promise I will shut up after this one), is there a way to export a couple of unit instead of the entire list? (maybe I canāt find it though)
Why canāt you make changes to Squadrons (or any other unit) in MC???
Just double click and you can do almost everything that you want with a squadron.
Including changing patches and location ect. You can even change the type of aircraft that a squadron uses.Gr Falcas
-
Amen.
-
I do that and it work very good! But sometimes I need to edit those field to change the airbase location, etc. and I would like to delete some lines if I the need arises!
Anyway, is there a way to export only some unit instead of the whole list? Maybe selected ones? -
I do that and it work very good! But sometimes I need to edit those field to change the airbase location, etc. and I would like to delete some lines if I the need arises!
With MC there is no need to delete any line or change anything manually.
This is the biggest cause of corrupted missions and this is why you can not insert or delete any values as a user.
This gives the best guaranty that everything works correctly.
Beside that it is much more user friendly.But if you could give an detailed concrete example where you would like to delete a line?
Which fields are you revering to?
Moving an airbase? Why would you want to do that?
(ps, I donāt mind discussing this. If you have a valid point and it is possible it will be included)Anyway, is there a way to export only some unit instead of the whole list? Maybe selected ones?
Yes, this would be possible. However, I donāt see in which way this would help.
Adding a unit is done very quickly in BMS itself.Gr Falcas
-
This is the biggest cause of corrupted missions and this is why you can not insert or delete any values as a user.
This gives the best guaranty that everything works correctly.
Beside that it is much more user friendly.As Iāve read your lines I came to the conclusion that exactly as you say this will bring a lot more harm than good, so nevermind, it was from the start only a cosmetic addition.
Yes, this would be possible. However, I donāt see in which way this would help.
Adding a unit is done very quickly in BMS itself.I need for example to export some units or objects from a Save0 to a TE, or some flights from a TE to another TE, etc.
Can do that already for objects with edits on the exported CSV file, but with units I canāt do that, usually I need to work-around these limitations in TacEdit also, and sometimes itās pretty annoying and time consuming, so I was hoping for a quicker way to do that. -
System.IndexOutOfRangeException: Index was outside the bounds of the array. at MissionCommander.fclsSquadron.LoadData() at MissionCommander.fclsSquadron.fclsSquadron_Load(Object sender, EventArgs e) at System.Windows.Forms.Form.OnLoad(EventArgs e) at System.Windows.Forms.Form.OnCreateControl() at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) at System.Windows.Forms.Control.CreateControl() at System.Windows.Forms.Control.WmShowWindow(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ScrollableControl.WndProc(Message& m) at System.Windows.Forms.Form.WmShowWindow(Message& m) at System.Windows.Forms.Form.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
TE used here
Itās hit & miss. Some will allow me to open the page, but others generate this error.
-
@Dead:
System.IndexOutOfRangeException: Index was outside the bounds of the array. at MissionCommander.fclsSquadron.LoadData() at MissionCommander.fclsSquadron.fclsSquadron_Load(Object sender, EventArgs e) at System.Windows.Forms.Form.OnLoad(EventArgs e) at System.Windows.Forms.Form.OnCreateControl() at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) at System.Windows.Forms.Control.CreateControl() at System.Windows.Forms.Control.WmShowWindow(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ScrollableControl.WndProc(Message& m) at System.Windows.Forms.Form.WmShowWindow(Message& m) at System.Windows.Forms.Form.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
TE used here
Itās hit & miss. Some will allow me to open the page, but others generate this error.
Thanks for the report and directly supplying the mission file!!!
Iāll have a look at it.
There are some other bugs like these that I have to adress.Gr Falcas
-
I need for example to export some units or objects from a Save0 to a TE, or some flights from a TE to another TE, etc.
Can do that already for objects with edits on the exported CSV file, but with units I canāt do that, usually I need to work-around these limitations in TacEdit also, and sometimes itās pretty annoying and time consuming, so I was hoping for a quicker way to do that.If I understand you correctly you want to select a couple of units, let say a couple of battalions (or all airdefence battalions) and export them. Then import them into a different mission.
I can see that this will help mission builders, however, this will take some time to implement correctly.Gr Falcas
-
Bug?
While working on a custom campaign, I noticed that MC can be used to change squadron patches.
However when doing so, the selected patch is not what is shown when the campaign is started.
-
Bug?
While working on a custom campaign, I noticed that MC can be used to change squadron patches.
However when doing so, the selected patch is not what is shown when the campaign is started.
With custon campaign, you mean you are working on one of the save*.cam files?
Gr Falcas
-
I think that you have to wait until all the flights of the old squadron disappear (cancelled or completed) to see it
-
If I understand you correctly you want to select a couple of units, let say a couple of battalions (or all airdefence battalions) and export them. Then import them into a different mission.
Exactly!
I can see that this will help mission builders, however, this will take some time to implement correctly.
Thanks Falcas!
-
With custon campaign, you mean you are working on one of the save*.cam files?
Gr Falcas
Yes
-
Any comment on this? ^^
-
-
Is it possible to covert *.xun files into something readable please?
I mean xun2txt or xun2xls etc util. I tried to rename xun extension to zip, rar, 7z ā¦ but it is not soo simpleTHANKS