Saitek X-52 Profile
-
Sounding very much like a conflict somewhere - could be with your mouse.
-
Hello KesMonkey,
No doubt this profile is awesome. Although file extension is same for X52 and X52 Pro but Pro owners cannot use your profile. All x52 Pro owners will appreciate if you can upload same profile for X52 Pro (as Hard~deck did his profile for both) or publish print out of your profile from Saitek Profile Editor. Printout will help us quickly make x52 pro profile copying your buttons/macros.
Thanks a lot!
Keep up the good work!
Griffin+1
I agree with GriffinArrowUFC. I have a x52 pro and would like to use this profile. -
Hi, my radar cursor isn’t working at all. I have loaded the Stick Profile, and everything else works (including the mouse wheel on the throttle).
I also checked if BMS recognizes the buttons / axis in the Controller Setup screen and it does but once I get into the cockpit it doesn’t.
What does happen is that, when I move the mouse stick it freezes my Track IR even though I have disabled all Hot keys except F12 for centering it.
EDIT problem solved. Track IR didn’t save the changes I made. -
Just a quick questin how do you control the radar antenna elevation, hud brightness and field of view?
In the profile screenshot they are hight lighted in green on the throttle?Want to try this profile out but cant get the green options to work?
-
Hey Echelon1…
For those you may have to set them up manually in the advanced options area. Sometimes they don’t map properly.
Cheers!
Mike -
thnx shiznit
it worked for me via the advanced option.
-
Hi all,
This issue has been posted here already but i am going to give this one shot before I opt to do something else. I installed this according to instructions and the profile works great until I plug my TH MFD’s in. DXDIAG reports the following.
Saitek X52 Controller 0
MFD1 Controller 3
MFD2 Controller 4
In BMS
MFD1 buttons 1-28 of 32
MFD2 33-60 of 32 (64)
X52 65 and up
Is there a way to fix this? If I do fix this. Will I have to redo it again when I get my peddles or should I just redo my Saitek profile. I love the way this is done but if I am going to have to do a bunch of configuration to it i will just do a profile for it. At least when I get my peddles I won’t have to redo it again. Can the sim be configured somewhere to put the correct id’s in? It apparently doesn’t get the info from direct x or it would be correct. -
Got it sorted.
-
-
At the end of the keyfile there the DX button assignments. Because my MFD’s are taking 0 and 1 for controller ID assignments my X52 is 3 My DX buttons start at 64 not 0 for the hotas. The first command at the end of the keyfile is for the first trigger detent and it has an assignment for button 0( 1 in BMS) so I changed it to 64. It would look like this…
SimTriggerFirstDetent 0 8 -2 0 0x0 0 Original entry at the end of the keyfile
SimTriggerFirstDetent 64 8 -2 0 0x0 0 New entryDo this in sequence for all 32 buttons that follow… For the shifted buttons they start at 257 so I had to add 64 to those to be assigned in DX correctly…so 257 becomes 321 and once again in sequence go up.
SimEmergencyJettison 257 8 -2 0 0x0 0
SimEmergencyJettison 321 8 -2 0 0x0 0
-
Can you point me in the direction of where to change my axis curves for my x52pro?
-
hi
i follow the guide exactly as describe but radar cursor only working to the upper right.
there isnt any problem with my x52 microstick -
•With these keyfiles, Radar Cursor control is mapped to the default keys, which are F8 (up), F9 (down), F10 (left), and F11 (right).
•This may unfortunately cause conflict with your TrackIR keys. Simply remap your TrackIR keys, if needed.Cheers!
Mike -
Has anybody transformed this profile into an X52 PRO one? I could really use it.
Thanks!
-
•With these keyfiles, Radar Cursor control is mapped to the default keys, which are F8 (up), F9 (down), F10 (left), and F11 (right).
•This may unfortunately cause conflict with your TrackIR keys. Simply remap your TrackIR keys, if needed.Cheers!
MikeSo, i disable trackir program and run bms .
this time none of the radar cursor were moving and also i notice that not all buttons do something and some buttons has the same funcions in other modes or with pinckyswitch …
ideas? -
Sounds like your profiles are confused…has happened to me before. Reload the profile for saitek, start bms and reload the profile there. Check your throttle, and all other axis settings and save. should be good to go.
Cheers!
Mike -
Sounds like your profiles are confused…has happened to me before. Reload the profile for saitek, start bms and reload the profile there. Check your throttle, and all other axis settings and save. should be good to go.
Cheers!
Mikehi,
i reload keya and profile but still no go. -
Is this profile still up to date? I have a X-52 and when I get home next week I’d like to get myself installed
-
Kes, thank you, thank you, thank you!!! great profile. and thanks to all the other contributors!!!
-jav
-
Hi Gents,
This is some how over my head. Can some one help me out? I have a problem as sune I have to use the pinkey ex. fire B is ingame set to vpn A-G cycle Hardspoints and with pinkey the fire B should be laser arm toggle (pinkey activated), but Im not able to make it work - same problem with all pinkey activated commands. So in this ex. my fire B are working ok, but as sune I have to assign Laser Arm Toggle to the same fire B, Im lost
Please step my step (Im a old man or maybe not, but I dont get it). Can someone please help me out. Sorry for this mes, but Im stuck.
Profile is loaded and all.
Kind regards
Svend