Weapon Delivery Planner released
-
This post is deleted! -
Have not see this myself, so if you have a concrete example like a mission, I would love to have the mission.
Gr Falcas
Here’s a .tac file http://rapidshare.com/files/1727998144/KR_KOTAR.rar
Heading to STPT 5 is actually 180, but when I load the .tac file into WDP the flight plan says it is 360.
-
download is not working…
You could also send it to info"AT"weapondeliveryplanner.nlThanks
-
Got your file and fixed in the next update.
Thanks for the report.
Gr Falcas
-
I may not be posting this at the correct place. Please move it if you like. I was watching Falcas’ tutorial on how to setup WDP for missions and campaigns. One thing I had problem figuring out is how to get tanker track in the first place. In his tutorial, the tank track was already there and he just manipulate the stpt. What I did in my campaign was to have 3 tankers on station every 3-4 hr. They came from Kedana. Then I frap my f-16 flights to have one of their stpt set to refuel and put that stpt near a tanker. But when I load that flight into WDP, I couldn’t see tanker track anywhere on the map even though “show tanker track” is checked. I tried to white out the map, but still nothing. Something I didn’t set up right. Anyone has an idea?
-
load your TE in Falcon’s TE editor, check whether your tankers are actually on a Tanker mission or not, you may have them set to Training or Airlift.
-
load your TE in Falcon’s TE editor, check whether your tankers are actually on a Tanker mission or not, you may have them set to Training or Airlift.
100% sure they are on Tanker mission, not on something else. That’s why I feel so weird about this. Btw, it was campaign though, not a TE mission.
-
please share the campaign save files.
-
a bingo calc would be nice here since wdp has aircraft config/flightplan it should be easy…
based on this one( maybe…??) it could give est bingo fuel
https://www.benchmarksims.org/forum/entry.php?214-Fuel-management -
a bingo calc would be nice here since wdp has aircraft config/flightplan it should be easy…
based on this one( maybe…??) it could give est bingo fuel
https://www.benchmarksims.org/forum/entry.php?214-Fuel-managementYou already have bingo fuel in your datacard. Set the desired amount of fuel at the landing waypoint and the calculated fuel at your farthest waypoint is your bingo.
-
I may not be posting this at the correct place. Please move it if you like. I was watching Falcas’ tutorial on how to setup WDP for missions and campaigns. One thing I had problem figuring out is how to get tanker track in the first place. In his tutorial, the tank track was already there and he just manipulate the stpt. What I did in my campaign was to have 3 tankers on station every 3-4 hr. They came from Kedana. Then I frap my f-16 flights to have one of their stpt set to refuel and put that stpt near a tanker. But when I load that flight into WDP, I couldn’t see tanker track anywhere on the map even though “show tanker track” is checked. I tried to white out the map, but still nothing. Something I didn’t set up right. Anyone has an idea?
Hi,
Tanker tracks are check on a couple of things before they are shown on the map in WDP.
First, it should be a tanker mission, but as they most probably have been created by the campaign engine, I think that will be fine.
Second, The tanker should be on station while your flight is occuring. This means that the onstation times of the tanker are compared with your flightplan.
If the tanker is not on station during your flight, the tanker box is not shown on the map.Gr Falcas
-
You already have bingo fuel in your datacard. Set the desired amount of fuel at the landing waypoint and the calculated fuel at your farthest waypoint is your bingo.
Yep, correct and exactly what it is made for.
With on little difference, it is better to set the fuel on your alternate (default 1000lbs). This will give you enough fuel to fly to your destination and then to your alternate.Gr Falcas
-
falcas my laptop doesn’t have the windows installed in the default drive…(C:\ drive doesn’t exist) and the wdp won’t install
i have 3 drives
F: local disk(windows xp installation)
physical dvd drive
E, F etc as virtual or removable drives(usb)
installers shows message: “invalid drive C:” and won’t let me install…
btw bms is installed on the “F:\Falcon BMS 4.32” normaly as it should…any ideas on how to install???
-
Hi Guys,
Just a quick question…
When i plan a mission in the TE editor and load the mission into WDP it only ever shows the DPRK flights and not the USA ones.
Really annoying as i cant select the flights i want to plant and fly, just wondering if anyone has had the same issues and if so how you resolved them.
Thanks
-
Hi Guys,
Just a quick question…
When i plan a mission in the TE editor and load the mission into WDP it only ever shows the DPRK flights and not the USA ones.
Really annoying as i cant select the flights i want to plant and fly, just wondering if anyone has had the same issues and if so how you resolved them.
Thanks
goto settings menu and try Reset Side button on the bottom, restart wdp, see if that helps.
-
Fixed it. Thanks!
-
Not sure if this is the right place to post it. In my WDP, the default range for SA-5 is 168nm, which is twice that of SA-10 and Patriot. Is that correct? I always thought SA-10 family (S300, S400 whatnot) and Patriot are the longest range SAMs.
-
That all depends on what you use for the thread range of the PPT type.
Have a look at the DTC–> Pre-Planned threads.
There you can change your PPT size. Or with 2 fast buttons: Radar Zone and Engagement Zone.
165nm is the radar range for the SA-5 and 54nm is the engagement range for the SA-5.
Or you can set any range for any type of PPT.
You can also create your own PPT types with any name/code you like.Gr Falcas
-
Falcas,
Having a problem with WDP 3.5.1.0. Every time I try to save the DTC after creating it, I get a “caution, theater not installed. TE.ini not moved to BMS.”
Screenshot is attached. Any help would be greatly appreciated!
RAD
-
@RAD:
Falcas,
Having a problem with WDP 3.5.1.0. Every time I try to save the DTC after creating it, I get a “caution, theater not installed. TE.ini not moved to BMS.”
Screenshot is attached. Any help would be greatly appreciated!
RAD
Hi,
What do you mean with: after creating it?
What steps do you take to get this message?Gr Falcas