Falcon MFD Software for android tablets
-
One more thing… there is a Galaxy S3 app you might like… for the ICP and DED. . I used it for a while and it worked great https://www.benchmarksims.org/forum/showthread.php?18771-Android-Falcon-ICP-DED&highlight=Android+icp
-
One more thing… there is a Galaxy S3 app you might like… for the ICP and DED. . I used it for a while and it worked great https://www.benchmarksims.org/forum/showthread.php?18771-Android-Falcon-ICP-DED&highlight=Android+icp
this is also great program
but my program is little bit differentcan you say me you screen size (width and height)
-
I’m just giving this a first go - tried to install on a Samsung Galaxy S lll
The galaxy S3 has screen dimensions of 720 x 1280 pixels and 4.8 in. diagonal. 306 ppi Width is 2.5" Height is 4-3/16"
-
The galaxy S3 has screen dimensions of 720 x 1280 pixels and 4.8 in. diagonal. 306 ppi Width is 2.5" Height is 4-3/16"
program is supporting you screen resolution
unfortunatelly i dont have any idea -
Great software, well done!!
Only issue I 've noticed is that if I do alt+tab to switch out of BMS, when I return everything works fine except the MFDs not being updated any more. The only solution I have come up is to exit BMS and start over. Any ideas?
Thanks anyway for the great tool -
Did you try closing the Apk (only) and restarting?
-
Great software, well done!!
Only issue I 've noticed is that if I do alt+tab to switch out of BMS, when I return everything works fine except the MFDs not being updated any more. The only solution I have come up is to exit BMS and start over. Any ideas?
Thanks anyway for the great tooli also have same issue
it is related with Falcon BMS memory.
Both program can not read same adress of memoryso as result i can not do anything for that problem
-
I also suspected memory issue, probably due to minimize of BMS.
Thanks anyway! -
I also suspected memory issue, probably due to minimize of BMS.
Thanks anyway!Have you tried my recommendation? Also, what version of the Apk are you using?
-
Have you tried my recommendation? Also, what version of the Apk are you using?
I am using apk version 1.7.1, and what I have tried among many, is closing the application on android and re-opening without success. Everything else works except MFD data.
You faced the same issue and managed to work? -
I am using apk version 1.7.1, and what I have tried among many, is closing the application on android and re-opening without success. Everything else works except MFD data.
You faced the same issue and managed to work?I use the Multi-tablet version but have helped others. We have found version 1.7.0 works better. By chance, have you tried that version?
-
Tested with 1.7.0 also but issue remains, guess it has to do with FalconMFDServer and shared memory.
Additional question, how do you make the briefing screen to operate, always black for me. -
how do you make the briefing screen to operate, always black for me.
Take a screenshot using your keyboard “PrintSysRq” button of any BMS screen. For instance… open the briefing tab… take a screenshot. Then on the tablet… open the briefing screen… and tap the Print screen button. The print screen action within BMS saves a .jpg file of whatever screen you have open in your C:/Falcon BMS 4.32/User/Pictures folder. The tablet Print Screen button will load those pictures in sequence each time you press the button, up to 5 pictures. Make sure you change to 2/5, 3/5, etc, etc to load each one. You will need to keep that folder clean between missions… to correctly load your desired pictures for each mission
-
Take a screenshot using your keyboard “PrintSysRq” button of any BMS screen. For instance… open the briefing tab… take a screenshot. Then on the tablet… open the briefing screen… and tap the Print screen button. The print screen action within BMS saves a .jpg file of whatever screen you have open in your C:/Falcon BMS 4.32/User/Pictures folder. The tablet Print Screen button will load those pictures in sequence each time you press the button, up to 5 pictures. Make sure you change to 2/5, 3/5, etc, etc to load each one. You will need to keep that folder clean between missions… to correctly load your desired pictures for each mission
also you read instruction
https://mega.co.nz/#!FFABUQoL!v323HOzNSEl79K6h0LNxljSGjVDb_QDL2apIsbmBHWU -
Followup. Just tested the software on a used LG LGL39C and except for the lack of an IP address the software seemed to work. It came up fine on that device but with lack of service comes lack of device ip address. When I tried to back out it kept giving me error messages about something not being a constant in com.arifkomurculer.falconmfd.MainAcivity$MessagesName, and gave the close button for the message beneath that. That was the 1.7.1 version, the 1.7.0 wouldn’t allow me to see the save button. komurcu - do you want any more information from me or would you prefer I go radio silent?
-Babite -
Followup. Just tested the software on a used LG LGL39C and except for the lack of an IP address the software seemed to work. It came up fine on that device but with lack of service comes lack of device ip address.
I don’t know anything about an LGL39C, but would you please explain “lack of service”?
-
I don’t know anything about an LGL39C, but would you please explain “lack of service”?
No longer connected to a carrier. Plan ceased to exhist. No money given to run as phone anymore. Lack of service.
Tried with lgl39c connected to router/wifi setup. It displayed an IP address when I did that - and as such I got it to work briefly. The screen size is small enough that I only saw the upper half of the left MFD - top row of buttons and 3 from the left edge. The window next to fuel said 400 & 320, I’m guessing that is the resolution. I had a MFD with buttons superimposed over the actual screen - like picture in picture, but it was blocking part of the information. Is that supposed to be there, or is it because my screen was so small? The rate of data transmission was about half a second behind what my monitor displayed, but my graphics on screen were showing somewhere in the 30-50 fps range. I’d like to see that lag get less but for a first run it looked great. I’m currently loking into a tablet - what is the smallest I can get away with? In other words is screen size really important or is it more screen resolution that is the deciding factor?
-Babite -
Well…as has already been said more than once in this thread… but I’ll repeat… this program was designed for a 10" android TABLET… not a smartphone… the issues you are stating I’m sure are because of trying to display data on a 3.2" in screen that was designed for a 10"
The model I looked up showed the Android Operating System as “Gingerbread” V2.3 What is yours?
I’m not completely sure here… (perhaps komurcu can confim)… but I beleive it requires a 4.X versionNo longer connected to a carrier. Plan ceased to exhist. No money given to run as phone anymore. Lack of service
If the phone has no connection to the Internet… How is it you expect it to be able to connect to the MFD Server???
-
I’m currently loking into a tablet - what is the smallest I can get away with? In other words is screen size really important or is it more screen resolution that is the deciding factor?
-BabiteMy answer would be 10.1 screen size…nothing smaller.
-
i agree with Dracfalcon