MemphisBelle´s X55 Rhino Profile
-
Too bad you are having problems. Like Chaos, I have no issues at all. Hope you keep working on it.
-
Hi all,
I am new to Falcon BMS and not a programmer, I have downloaded MemphisBelle´s X55 Rhino Profile and have no idea what to do next. What files go where and do you load through the Saitek software or via Falcon BMS setup screen. Help please. -
Hey all, sorry for my long absence. I have been busy with other things the last weeks.
I am happy that you guys like my profile. As for the ghost issues thing I can tell you that a selfpowered USB Hub made the work for me. The Ghost issues mostley are caused by power issues due to the large amount of power which is needed to run the whole 2 devices with all its lights, switches and functions. This sometimes cause inputs that havent been made by the user. As I said, to get rid of it so I purchased a new USB Hub which has an own Power supply and I havent encounterd any Ghost input issues anymore since then.I don’t have a x55 yet, I’m planning on getting one soon, but this profile looks the best out of all the x55 profiles out there so far. Thanks for your work.
Thank you very much, I hope that it´ll help you through the game
So far so good, like the profile so far. I had to make a minor change, in the sim I needed keys to control the cockpit view–I don’t have TrackIR–so I use the U\D\L\R arrows to take care of that. The other thing I’m not too sure about but seem to have stumbled on to a solution is once in the sim, after loading the keyfile associated with the profile, what other things should be done?
I’ve got the stick recognized and the throttle recognized, but it took a while to figure out which was the correct axis for the range and radar…or do I even need to do anything in the advanced tabs?
The first time entering the sim, it was almost as if the profile had been lost by the stick, keypresses were returning number values as opposed to the mapped keys.
This pretty much sounds like the ghost input issue, how did you connect the devices to your PC?
After a few hours of using the sticks and software it seems to be a bugfest. The profile is awesome, when it works. If I hit ‘Clear’ on the small tray icon, Windows crashes and restarts. If I use the key test utility with the HUD programming software, Windows crashes and restarts. I’ve tried other USB ports and have reinstalled the drivers and software multiple times and there is nothing but problems. Without the software, all of the keys and axes are detected by Windows so it seems that the hardware is ok, but I am having nothing but problems with the drivers and\or software.
I’ve been searching the internet for solutions but I am not having much luck. Back to the Cougar
Do you happen to have blue screens also, or does your PC simply reboot from its own? This could be caused by a underpowered power supply that is built into your PC. I used to have those issues as well, but as soon as I have put in a stronger power supply I got rid of them.
Also check thisI haven’t had any problems whatsoever with the X55. Not even the reported ghosting issues. Do you have the current driver and software installed? I haven’t had any crashes at all and BMS recognizes all of my commands using direct input and the HUD software. I created my own profile and use my own bms .key file and haven’t used any other profile from other members.
Thanks guys for your feedbacks. I try to be a little more often here in the forums…promised
-
Hello everyone! I love your profile
But I am having a few issues with it… I don’t seem to have a ghosting issue but I am having a issue where I hit the TMS up button and it works then, I hit the TMS UP button again (this is all as example) and it opens my airbrake. It seems like the buttons all of sudden the buttons get switched around.Please help! :p:p
-
Hello everyone! I love your profile
But I am having a few issues with it… I don’t seem to have a ghosting issue but I am having a issue where I hit the TMS up button and it works then, I hit the TMS UP button again (this is all as example) and it opens my airbrake. It seems like the buttons all of sudden the buttons get switched around.Please help! :p:p
It is possible that you may have a ghosting issue. What you are stating is what I call ghosting. This was the problem I was experiencing until I got a powered USB external Hub. I may be wrong…others may have another solution.
-
It is possible that you may have a ghosting issue. What you are stating is what I call ghosting. This was the problem I was experiencing until I got a powered USB external Hub. I may be wrong…others may have another solution.
figured it out… Didn’t load the BMS_Falcon key bindings on the game itself :roll:
-
figured it out… Didn’t load the BMS_Falcon key bindings on the game itself :roll:
Hey toxic and thanks for your feedback, I am glad that you´ve solved your issue.
-
Okay. Another problem I am having is interference between the TGP slewing and trim… Whenever I try to slew the TGP around the ground my trim moves along with the RADAR - Up / RADAR - DOWN. On the Throttle H3 control. is this a problem other people are experiencing too? Also whenever I hit ESC to end the mission my game minimizes and my start menu appears. Please help! I love you profile but I am having some difficulty with it.
also, do people have problems with CTRL just getting continuously pressed and being unable to do anything about it getting unstuck.
-
Please help
-
quick question memphis, which keystroke file are you using for this profile? thanks.
-
quick question memphis, which keystroke file are you using for this profile? thanks.
Hey there PunchOut, I am using the file which comes with the download…BMS_F-16_Rhino.key
you´ll find the keyfile in the “BMS user config” folder. -
Guys… I do not know why, but when i try to load profile & keystrokes file. Buttons on Throtle unit do not work. For example when i switch sw2 / sw4 / sw6 bms shows me Button 39 / Button 41 / Button 43 was pressed and no any functions assignet on it
Same with any other profile/keystrokes.
Pls help -
Guys… I do not know why, but when i try to load profile & keystrokes file. Buttons on Throtle unit do not work. For example when i switch sw2 / sw4 / sw6 bms shows me Button 39 / Button 41 / Button 43 was pressed and no any functions assignet on it
Same with any other profile/keystrokes.
Pls helpLooks like you did not load his profile in the setup screen. Do you see MemphisBelle’s keyfile on the keyfile list? If so, did you load it? I cannot really tell from reading your question…just asking.
-
Hey guys, sorry for my long absence but I am not really much into BMS at the Moment, I dont have it installed even. So I cant check certain issues or check some changings.
@jg77merten, does your issue still persist?MemphisBelle
-
@Memphis291: Yes… both files applyed (profile and keystroke)
This is SW6 active: -
Hmmm…I wonder why your stick points to the top left corner and your throttle is not assigned at all? So you’re testing the buttons/switches before assigning Axis?
I remember of having had a similar issue with problems with the assignment, but I dont know anymore what I did to fix it. Have you tested other profiles already? Do they work? Or create a testprofile with just a few assigned functions and test whether they’ll be recognized properly.
If this doesnt shows off the issue so report back here then, I’ll gonna ask a buddy then who might be able to help.
-
It’s not stick. You can see i switch listbox “controller” to throtle unit.
My joystick works good in War Thunder, il2 46/BOB/BOS
Problem with BMS only… I used yours and others profiles… no effect -
I try to ask a friend who might know a solution…hope it wont take too long
-
Leave your controller to Joystick. If you change it to Throttle, it will screw things up. Make all your assignments with “Joytick” in your controller.
-
Leave your controller to Joystick. If you change it to Throttle, it will screw things up. Make all your assignments with “Joytick” in your controller.
Exactly what HE said!