KEYSPEECH PROFILES- FOR ALL CALLSIGNS!!!!
-
Hello, I’m back from vacation. About the profile list, I can add validation only when profile is selected.
-
Hello, I’m back from vacation. About the profile list, I can add validation only when profile is selected.
Hope vacations were fun.[emoji3]
What are the advantages of checking the whole list?
If there are no pros on that, then it would be more “comfortable” to validate only when selected.
At least for the BMS users who are using my profiles.
Thanks for the support.
-
Edited- double post. Deleted one
-
And where is the good one? Lol
-
This post is deleted! -
Everybody uses JoyToKey ? Because I don’t need this … I’m using Saitek X52
I do not use it either. I own hotas cougar and there is no need for it with the dx support.
-
Hello, I’m back from vacation. About the profile list, I can add validation only when profile is selected.
Hello all, I have upgraded KeySpeech to 3.0.4. Notice that all profile’s files are moved into «Profile» folder.
-
Hi,
I had this tool on my todo list for far to long but final came around to set it up and tweak and play with it.
Thus far accuracy is not even in the double digits.;-)
This could be many things. I just gave Windows VR 4 lessons and this could be insufficient. Will test some more.The three things I wanted to mention are:
1 In the trail version I still need to fill in my mail address when the program is started, despite having added the trail license file which was send to me when filled in the mail address for the first time. Pretty annoying I must say.
2 In setting the accuracy correct in trying to solve the hitrate, the mouse-over window on the taskbar icon shows me STATUS: Enabled, Accuracy: 0%. This despite having set an accuracy percentage in the settings/Accuracy tab. Is this because of it being a trail version?
3 And above posts mention JoyToKey when setting PPT’s. The two options available in my version [3.0.4.0] are shown in the picture below. I guess this is an update and with JoyToKey one now has to choose Push To Talk!Now lets see if we can get the accuracy up to 95%. Am Dutch, but my English is not that bad.
Cheers.
-
It is a separate program.
So far I’m enjoying Keyspeech and having good sucess with the commands I know but I’m still learning . Overall they are very similar to my profiles but with more pbrase options for the same command so it shouldn’t take much more time. But I did notice that there is a few Sentry commands that seem to be different from the rest of Chalis, GCI, AWACs, etc. There are a few commands thst have the callsign and numbers and then “from one” so you end up saying “Sentry Avenger one one from one, picture.” This seems redundant but then again I haven’t been listening to RL comms lately.
I see the issue off the added words “from one” still present in v 2.3.5. Is this therefore a none-issue?
Example:
awacs fury one one from one declareThis can be found on all AWACS related calls: awacs - sentry - challis - cyrano - magic - cgi
In checking this further I came to learn that when correcting/deleting the “from one” words, the new phrase already excists. This resulted in 189 duplicates.
So why are these present? Is there a function to them jcenzano? Can I delete the “from one” phrases?Cheers,
-
@Ice:
Hi,
The three things I wanted to mention are:
1 In the trail version I still need to fill in my mail address when the program is started, despite having added the trail license file which was send to me when filled in the mail address for the first time. Pretty annoying I must say.
2 In setting the accuracy correct in trying to solve the hitrate, the mouse-over window on the taskbar icon shows me STATUS: Enabled, Accuracy: 0%. This despite having set an accuracy percentage in the settings/Accuracy tab. Is this because of it being a trail version?
3 And above posts mention JoyToKey when setting PPT’s. The two options available in my version [3.0.4.0] are shown in the picture below. I guess this is an update and with JoyToKey one now has to choose Push To Talk!Hi Ice,
- Once you have a license, you may just click on “Continue” button only. But you have a very good point, I will hide this box whether license is already there.
- Accuracy on the taskbar is your score of your last recognized command then you may use this score to adjust your accuracy slider.
- You don’t need JoyToKey.
Thanks
-
@Ice:
I see the issue off the added words “from one” still present in v 2.3.5. Is this therefore a none-issue?
Example:
awacs fury one one from one declareThis can be found on all AWACS related calls: awacs - sentry - challis - cyrano - magic - cgi
In checking this further I came to learn that when correcting/deleting the “from one” words, the new phrase already excists.
Not a bug. Those are some inherited commands from a sqn mate. Originally they were just planned to be
“Awacs from one, declare”
But because of the system I used to build these repetitive callsign phrases, the weird commands you are talking were built too.Just disregard them. They won’t hut you. Just use the ones that make sense.
Personally, I never use them, since the normal commands are present too.
I always try to use command like “chalis, falcon 11 request picture” or whatever callsign I have.Regarding accuracy slider, I am not native speaker but my foreign English is well above average and I found that the setting that works best for me is to fix it around 91-92%
Higher than that VR gets really really picky, even for native speakers. Keep in mind that any outside noise getting in through your Mic will distort your voice sound wave, making it more difficult for the VR to find a match.
-
Thanks KeySpeech, George, jcenzano,
Great support George. The issue mentioned is already fixed with versio 3.0.5.0. :bdance:
Still working on getting it all in 96% working order. Tests in Wordpad show promising, although I do need to talk slow and pronouce standalone words with detail. Hope this is because Windows Speech Recognition is not up to par yet on my system. Started the lessons yesterday and have done 3 sessies of the two lessons.
jcenzano. Looking at the command and phrases structure, I see inbound calls to tower on the default -request taxi- (ground)function. I have tested these but do not get a command returned on the phrases “approach say delay” and “approach say landing number” when airborne and inbound homeplate, although these suspect otherwise. I guess this is role-playing?
And I must say outstanding job. It’s all there. Thanks. -
@Ice:
jcenzano. Looking at the command and phrases structure, I see inbound calls to tower on the default -request taxi- (ground)function. I have tested these but do not get a command returned on the phrases “approach say delay” and “approach say landing number” when airborne and inbound homeplate, although these suspect otherwise. I guess this is role-playing?
And I must say outstanding job. It’s all there. Thanks.IIRC this might have to do with those commands being specific for falcon AF.
I will take a look.
-
George, can I say George?
Is there a way to have a shortcut set for the disable/enable function of the program itself?
And is there a way to set the time between inputs for keybindings to be processed? -
@Ice:
George, can I say George?
Is there a way to have a shortcut set for the disable/enable function of the program itself?
And is there a way to set the time between inputs for keybindings to be processed?Hi, toggle switch to on/off KeySpeech could be defined in Hotkeys screen as predefined action (next release) … You may set delay time for each keybinding in Voice Command Editor screen, or you may set Pause time between each iteration when you use Repeat value.
Update : KeySpeech v3.0.7 is released
-
Hello !
I have one question about Keyspeech. I know that the program use Windows voice recognition, but in windows control panel, I see that my Windows speech recognition is only in French.
I imagine that I can’t use keyspeech because phrases are in English and Windows want French, and accents are totally different. I searched on the net if I can change the language of Windows voice recognition, but It seems to be possible only during windows installation… I don’t really want to reinstall windows, but I think it’s the only way to use Keyspeech. Have you got any idea ?
I’m using Windows 7 Home Premium 64 bits - SP1.
(I’m sorry, I think my English is not so good)
-
AFAIK, you can set up your Voice-Thingi Language in Win7 Pro or higher.
In the lower ones, it shouldnt be possible, it uses the Language, in which it is delivered. -
Arf, so there is no way for me to use Keyspeech The last thing I can do is change phrases, like if I pronounce English with a French accent… For exemple, “tower request landing” could be “tauweur rickweste lèndig”, and windows might recognize french.
-
Arf, so there is no way for me to use Keyspeech The last thing I can do is change phrases, like if I pronounce English with a French accent… For exemple, “tower request landing” could be “tauweur rickweste lèndig”, and windows might recognize french.
Try it.
IIRC, on my side it is the same and VAC is working perfectly anyway.
-
Arf, so there is no way for me to use Keyspeech The last thing I can do is change phrases, like if I pronounce English with a French accent… For exemple, “tower request landing” could be “tauweur rickweste lèndig”, and windows might recognize french.
@Icewind, You can try with" Vistalizator":rolleyes:
I did it with my previous windows version home vista and it worked fine. I have checked just now that you can do it with seven version, and it seems ok with yours.;)@Dee-Jay : I did the same at fisrt, but really, it works much better with english language installed . .
English speech recognition engine trained with a french accent is better than french engine trained to pronounce english words, with french or even english accent … , isn’t it ?Windblow