Israeli Theater 4.34.3 update/full installer
-
I’m flying again the Israel theatre at this version (4.34) but I have a problem. When I watch the ACMI file on Tacview the applied map is Korea…
What am I doing wrong?
-
I’m flying again the Israel theatre at this version (4.34) but I have a problem. When I watch the ACMI file on Tacview the applied map is Korea…
What am I doing wrong?
Every time you want to open an acmi file from a theater different from the one previously used by TacView you need to open it from TacView itself and choose the theater at the bottom of the window where you choose the desired acmi file.
-
Falcon BMS has stopped working. Any suggestions?
Salaam alykum -
@Amru:
Falcon BMS has stopped working. Any suggestions?
Salaam alykumYou will need to provide a lot more information if you want anyone to be able to help you? What version of BMS are you using?
What version of the Israeli Theater are you using? Is this a one-off problem or can you list the steps you can take to repeat this very same issue?When, where and how does this problem occur? A specific campaign? Did you try another campaign? Does it happen in a TE?
Assuming this is a crash, do you have a crash log? Does this problem only happen with ITO? Do you get the same problem with Korea (KTO)?
What system specs are you using etc?
Also I would suggest creating a new topic for this problem in the ITO forum section if this problem ONLY happens when using ITO. Otherwise please post in the technical support forum for BMS.
-
Thanks
-
I have no trainig mission , the missions described in ITO Training Missions.pdf , someone could help me to find the way to fly this missions ? thanks
-
I have no trainig mission , the missions described in ITO Training Missions.pdf , someone could help me to find the way to fly this missions ? thanks
The Document you are talking about is an old leftover for a Version for 4.33.1 the Version for 4.34.3 that is linkt in post#1 in this thread just doesn’t contain Training TE’s. period.
-
The Document you are talking about is an old leftover for a Version for 4.33.1 the Version for 4.34.3 that is linkt in post#1 in this thread just doesn’t contain Training TE’s. period.
Thank you , comma, Now is clear ,comma, there is no information about that in the forum so I asked . period.
-
Help! I am trying to get back into Falcon BMS and I am having trouble with the loading of this theater. I’m using Falcon BMS 4.34 and the Israeli theater update 4-34-3. Every time I go to start the theater the start up screen will come up with BMS logo then hang for a few seconds then disappear. I can never get into the theater. I have no problems with the other theaters. Thanks for any help you can provide!
I tried to Debug but it just disappears also.
-
Help! I am trying to get back into Falcon BMS and I am having trouble with the loading of this theater. I’m using Falcon BMS 4.34 and the Israeli theater update 4-34-3. Every time I go to start the theater the start up screen will come up with BMS logo then hang for a few seconds then disappear. I can never get into the theater. I have no problems with the other theaters. Thanks for any help you can provide!
I tried to Debug but it just disappears also.
Disable you intro mode in the config editor?
-
Tried but still just disappears. I open the Edit Launcher and it gives me the following message "The program has crashed. A crashlog could not be written: C\Falcon BMS 4.34\User\Logs\2020-04-05_074611_crash.txt
I’m not a big code guy so I probably am missing something that I should be doing.
Found a way to copy bug report before it disappeared:
[00:00:00.000] **** Falcon 4.0 ****
[00:00:00.000] ****2019 Billion Soft (Hong Kong) Limited. All Rights Reserved. ****
[00:00:00.000] **** Falcon BMS 4.34.0 (x64) Build 19631 ****
[00:00:00.000] ****2019 Benchmark Sims. All Rights Reserved. ****
[00:00:00.000] Operating System: Windows 10 (10.0.18362)
[00:00:00.000] Create Window
[00:00:00.000] Windows cfg file size: 256, internal size: 256
[00:00:00.000] WM_ACTIVATE 1
[00:00:00.000] WM_ACTIVATE 0
[00:00:00.000] WM_ACTIVATE 1
[00:00:00.000] Valid F4 installation found [C:\Program Files (x86)\Steam\steamapps\common\Falcon 4.0\falcon4.exe]
[00:00:00.000] Init Display 2294942
[00:00:00.000] SystemLevelInit
[00:00:00.000] Initializing Sim Memory Pools….
[00:00:00.000] ## DeviceIndependentGraphicsSetup ##
[00:00:00.000] ## TheLoader Setup ##
[00:00:00.000] Loading texture_POLAK.bin with 224 sets, 3071 tiles
[00:00:00.000] ## Flush Refence start Cleanup if we dont get anything below in log something wrong in here ##
[00:00:00.000] ## FlushReferences Cleanup ##
[00:00:00.000] ## ObjectLOD Cleanup ##
[00:00:00.000] ## TheTextureBank Cleanup ##
[00:00:00.000] ## ThePaletteBank Cleanup ##
[00:00:00.000] ## TheColorBank Cleanup ##
[00:00:00.000] Info: 3DDB is new format (more than 2GB supported)
[00:00:00.000] Terrain: Load
[00:00:00.000] Terrain max texID: 3572
[00:00:00.000] Theater’s installed: Add-On Israel\Terrdata\theaterdefinition\Israel.tdf
[00:00:00.000] Theater’s installed: Add-On Balkans\Terrdata\theaterdefinition\Balkans.tdf
[00:00:00.000] Theater’s installed: Terrdata\theaterdefinition\Korea KTO.tdf
[00:00:00.000] Theater’s installed: Add-On Korea TvT\Terrdata\theaterdefinition\Korea_TvT.tdf
[00:00:00.000] Theater’s installed: Add-On emf\theaterdefinition\emf.tdf
[00:00:00.000] Theater’s installed: Add-On Kurile\TerrData\TheaterDefinition\Kurile.tdf
[00:00:00.000] Unable to open ‘alkans_Theater_4.34.exe’, filesOpen=0
[00:00:00.000] Theater’s installed: alkans_Theater_4.34.exe
[00:00:00.000] Theater’s installed: Add-on Iberia\TerrData\theaterdefinition\Iberia.tdf
[00:00:00.000] Theater’s installed: Add-On Israel\Israeli Theater Settings.exe
[00:00:00.000] GetCurrentTheater Israel
[00:00:00.000] TheaterReload
[00:00:00.000] theaterPath ‘C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\Israel’
[00:00:00.000] terrainPath ‘C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\Israel\terrain’
[00:00:00.000] Loading texture_POLAK.bin with 254 sets, 3285 tiles
[00:00:00.000] objectPath ‘C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\KoreaObj’
[00:00:00.000] ## Flush Refence start Cleanup if we dont get anything below in log something wrong in here ##
[00:00:00.000] ## FlushReferences Cleanup ##
[00:00:00.000] ## ObjectLOD Cleanup ##
[00:00:00.000] ## TheTextureBank Cleanup ##
[00:00:00.000] ## ThePaletteBank Cleanup ##
[00:00:00.000] ## TheColorBank Cleanup ##
[00:00:00.000] Info: 3DDB is new format (more than 2GB supported)
[00:00:00.000] GetCurrentTheater Israel
[00:00:00.000] Reading CT data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_CT.XML
[00:00:00.000] Reading CT data from XML -> Done, 3529 entries
[00:00:00.000] Reading UCD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_UCD.XML
[00:00:00.000] Reading UCD data from XML -> Done, 561 entries
[00:00:00.000] Reading FED data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_FED.XML
[00:00:00.000] Reading FED data from XML -> Done, 13551 entries
[00:00:00.000] Reading OCD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_OCD.XML
[00:00:00.000] Reading OCD data from XML -> Done, 656 entries
[00:00:00.000] Reading WCD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_WCD.XML
[00:00:00.000] Reading WCD data from XML -> Done, 696 entries
[00:00:00.000] Reading FCD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_FCD.XML
[00:00:00.000] Reading FCD data from XML -> Done, 939 entries
[00:00:00.000] Reading VCD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_VCD.XML
[00:00:00.000] Reading VCD data from XML -> Done, 414 entries
[00:00:00.000] Reading WLD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_WLD.XML
[00:00:00.000] Reading WLD data from XML -> Done, 556 entries
[00:00:00.000] Reading PHD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_PHD.XML
[00:00:00.000] Reading PHD data from XML -> Done, 751 entries
[00:00:00.000] Reading PDX data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_PDX.XML
[00:00:00.000] Read PDX data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_PDX.XML -> Unknown token “TaxiwayLetter”No clue what this means but might be helpful for someone to assist me.
Thx Cougar!
-
It appears you are using Falcon 4.34.0
Have you updated using U1… U2… and U3? -
Good catch. Thanks! I will try the updates tomorrow. I only downloaded when 4.34 first came out and stopped playing and just got back into the simulator.
Carswellafb
-
Good plan…
The latest “unofficial” release of this theatre has been optimized by Cougar56th to be compatible with U1, 2, and 3. You should confirm the theatre you have installed came from here…
https://www.benchmarksims.org/forum/showthread.php?38551-Israeli-Theater-4-34-3-update-full-installerYou’ll notice it specifically states 4.34.3
The original crew that developed it… for whatever reason… are no longer providing updates
-
It worked after updates. Thanks for your help.
CAFB
-
Just an FYI for anyone interested in this theater: for most campaigns awacs and jstar flights aren’t fragged automatically and will often not be possible to frag manually with an error of the flight not being able to find a waypoint, this has been acknowledged as a bms core bug. But I found a decent workaround - just frag training package first and add awacs and jstar flights to it. For fighter squadrons in 1982 campaign the only way out seems to be to move them from Ovda to another base.
In addition within this install of ito there is a problem with akrotiri base popping up where it shouldn’t, for example in the peace for galillee 1982 campaign - some squadrons are assigned to it for some reason. This can be fixed via mission commander.
There are also two Ben Gurion bases in database and I think only 27 is correct.
-
Just an FYI for anyone interested in this theater: for most campaigns awacs and jstar flights aren’t fragged automatically and will often not be possible to frag manually with an error of the flight not being able to find a waypoint, this has been acknowledged as a bms core bug. But I found a decent workaround - just frag training package first and add awacs and jstar flights to it. For fighter squadrons in 1982 campaign the only way out seems to be to move them from Ovda to another base.
In addition within this install of ito there is a problem with akrotiri base popping up where it shouldn’t, for example in the peace for galillee 1982 campaign - some squadrons are assigned to it for some reason. This can be fixed via mission commander.
There are also two Ben Gurion bases in database and I think only 27 is correct.
awesome, thanks!
btw do you still have to add a HAVCAP flight within the package? ( to protect the awacs )
-
I’ve installed the theater, but it won’t load. It shows up in the theater menu but wont boot into it.
-
I’ve installed the theater, but it won’t load. It shows up in the theater menu but wont boot into it.
As you reported the same issue in EMF. Could you explain what exactly means won’t boot into it.
Can you switch the theatre through 2D screen and BMS won’t start after them switch.
Does BMS start and you can’t into the campaign 2D or you get into 2D but can’t get into 3D?Gesendet von meinem SM-G930F mit Tapatalk
-
Regarding havcap : this is up to you and depends on the campaign. The issue here is how long do you expect the havcap to remain on station? I’ve been playing the 1982 campaign mostly and there are no aar tankers on Israeli side. So, while awacs and jstar flights can stay on station for about 5 hours, fighter jets will not, therefore this will take a larger toll on your fighter squadrons. So, really it’s up to you. I find it best to frag the awacs and jstar flights in a training package with c 130 over the Mediterranean and away from enemy, but I’m also doing my best to replicate what IAF did in both 1967 and 1982, which is oca strike everything in the first hour and control the entire airspace from the get go.