BMS Key File Help
-
Thanks Kolbe I will eagerly await your next version.
Can I also mention that I was unable to alter “show headlines in keyfile” and “chose keyboard layout”
Also double clicking a cell did not bring up editor as suggested on intro tab.You have to allow makros to make the sheets work properly.
-
I’m coming back to Falcon after a long while, the only thing that is stopping me is a decent joystick profile for the Warthog.
I’m assuming this was made with a Cougar joystick in mind, can this be adapted for use with a Warthog?If it can, do I make all the alterations through TARGET (although I’m not a TARGET fan), I was hoping I could alter the same functions (close as possible) between the Cougar throttle set up and the Warthog.
Thanks in advance
-
Thats doable and on my list. If you like you can send me your wish list of functions you want to use with your Hotas.
It’s time for some testing and I don’t own a Warthog so I need some help here.Just send me a PM with the functions and the buttons they should be assigned to.
-
I would like to try this, thanks! Can i use it on my X52? I would like to know the key for the gun please. If I program the first trigger det I cant shoot.
-
You need the 2nd Trigger Detent to shoot the gun
The X52 DX button numbers are slightly different.
Got to the controllers page and press each DX button on your stick. You’ll see below which button is pressed and which function is assigned to the pressed button.
That’s the easiest way to find out how your Hotas is set up. If you don’t like the function, just assign another on via UI (left click on function - butten press on Hotas)Regards
-
Yes, it works. Thanks for your help and all the work you put in to this!
-
Hi Kolbe!
I’ve been using your keyfiles for some time, and became aware of the fact that I had not said a propper thank you!!!
They are brilliant… As are the pdf helpfile/tutorial… Being no wizzard at DX-assignment and so on, they were very helpfull and inlightning.I can only recommend people to give it a try.:p
Best regards
ZoomOut -
Hi Zoomout,
thank youI am just in the progress of finetune and update my work for next release.
Unfortunately I am rather busy atm so it will take some time.I realized that I totally forgot to mention, that since U4 my keyfile work is implemented into BMS.
Just look at User / Joystick / Generic / KolbeFirst post is updated. I removed the download link.
I recommend to take a look at the new stuff, espeacially if you just downloaded the files after U4 was released.
For all of those, who have quastions regarding key files and DX stuff you should definately check out my manual.
One reason for writing it was to reduce my workload answering all the quastions here in the forum.But even if you have all working you may find it useful.
-
Hi Kolbe,
thanks a lot for your great work on your new keyfile.
This weekend i spend many hours to update your file with my callbacks.
Everything is now finished and all works perfekt. My callbacks with your design and the hole posible keybindings.But one question or just for info. I miss some keybindings in your new full file 1.5
Maybe you lost them or you delete it because not important in your mind? I bring the lost bindings in my new file, becaus i will have all possible bindings. I also think that some of them are important…Here the bindings i miss
SimNextWaypoint -1 0 0X1F 0 0 0 1 "Ckpit-Steerpoint Next" SimPrevWaypoint -1 0 0X1F 1 0 0 1 "Ckpit-Steerpoint Previous" SimECMOn -1 0 0X24 0 0 0 1 "Ckpit-ECM" OTWToggleScales -1 0 0X23 0 0 0 1 "HUD-Declutter" SimToggleMissileBoreSlave -1 0 0X16 2 0 0 1 "Wpn-Missile Bore/Slave" SimTrigger -1 0 0X35 0 0 0 1 "Wpn-Fire Gun" SoundOff -1 0 0X1F 4 0 0 1 "Sim-Sound Off" SimToggleMissileTDBPUncage -1 0 0XFFFFFFFF 0 0 0 1 "Wpn-Missile TD/BP" SimToggleExtLights -1 0 0XFFFFFFFF 0 0 0 1 "Ext Lights Off On" DecreaseAlow -1 0 0XFFFFFFFF 0 0 0 1 "Ckpit-ALOW Altitude Dec" IncreaseAlow -1 0 0XFFFFFFFF 0 0 0 1 "Ckpit-ALOW Altitude Inc" SimRadarNextTarget -1 0 0XFFFFFFFF 0 0 0 1 "Ckpit-UHF Normal/Backup" SimToggleDropPattern -1 0 0XFFFFFFFF 0 0 0 1 "Ckpit-Chaff/Flare Auto/Manual" SimDropFlare -1 0 0XFFFFFFFF 0 0 0 1 "Ckpit-Drop Flare" SimDropChaff -1 0 0XFFFFFFFF 0 0 0 1 "Ckpit-Drop Chaff" SimFCCSubModeStep -1 0 0XFFFFFFFF 0 0 0 1 "Ckpit-FCC Submodes" SimECMConsent -1 0 0XFFFFFFFF 0 0 0 1 "ECM-Consent_old CMS down" SimECMStandby -1 0 0XFFFFFFFF 0 0 0 1 "ECM-Standby_old CMS right" SimDropProgrammed -1 0 0XFFFFFFFF 0 0 0 1 "HOTAS-Run Prg_old CMS up" KneeboardTogglePage -1 0 0XFFFFFFFF 0 0 0 1 "Ckpit-Kneeboard Page" SimTISLPower -1 0 0XFFFFFFFF 0 0 0 1 "Ckpit-Power TISL" SimToggleGhostMFDs -1 0 0XFFFFFFFF 0 0 0 1 "View-Cockpit Ghost MFD Zoom" SimToggleCockpit -1 0 0XFFFFFFFF 0 0 0 1 "View-Cockpit Wide/Normal" OTW1000View -1 0 0XFFFFFFFF 0 0 0 1 "View-Cockpit 10:00" OTW1200LView -1 0 0XFFFFFFFF 0 0 0 1 "View-Cockpit Lower Left" OTW200View -1 0 0XFFFFFFFF 0 0 0 1 "View-Cockpit 2:00" OTW900View -1 0 0XFFFFFFFF 0 0 0 1 "View-Cockpit 9:00" OTW300View -1 0 0XFFFFFFFF 0 0 0 1 "View-Cockpit 3:00" OTW800View -1 0 0XFFFFFFFF 0 0 0 1 "View-Cockpit 8:00" OTW400View -1 0 0XFFFFFFFF 0 0 0 1 "View-Cockpit 4:00" OTW1200RView -1 0 0XFFFFFFFF 0 0 0 1 "View-Cockpit Lower Right" OTW1200HUDView -1 0 0XFFFFFFFF 0 0 0 1 "View-Cockpit HUD" OTWViewZoomIn -1 0 0XFFFFFFFF 0 0 0 1 "View-Zoom In" OTWViewZoomOut -1 0 0XFFFFFFFF 0 0 0 1 "View-Zoom Out" SimNextAGWeapon -1 0 0XFFFFFFFF 0 0 0 1 "Wpn-A To G Cycle Hardpoints" BombIntervalDecrement -1 0 0XFFFFFFFF 0 0 0 1 "Wpn-Bomb Interval Dec" BombIntervalIncrement -1 0 0XFFFFFFFF 0 0 0 1 "Wpn-Bomb Interval Inc" BombRippleDecrement -1 0 0XFFFFFFFF 0 0 0 1 "Wpn-Bomb Ripple Dec" BombRippleIncrement -1 0 0XFFFFFFFF 0 0 0 1 "Wpn-Bomb Ripple Inc" BombBurstIncrement -1 0 0XFFFFFFFF 0 0 0 1 "Wpn-CBU Burst Altitude Cycle" BombSGLRelease -1 0 0XFFFFFFFF 0 0 0 1 "Wpn-Release Bombs Singly" BombPairRelease -1 0 0XFFFFFFFF 0 0 0 1 "Wpn-Release Bombs In Pairs" SimToggleMissileSpotScan -1 0 0XFFFFFFFF 0 0 0 1 "Wpn-Sidewinder Spot/Scan" OTWToggleCustom3dPitView -1 0 0XFFFFFFFF 0 0 0 1 "Custom 3D Cockpit View" OTWToggleAeroDisplay -1 0 0XFFFFFFFF 0 0 0 1 "Sim-Aerodynamic Debug" System bindings: OTWScaleDown -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-Object Scale Down" OTWScaleUp -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-Object Scale Up" OTWToggleAutoScale -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-Vehicle Auto-Scaling" OTWSetScale -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-BSS=1" OTWSetScale -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-BSS=3" OTWSetScale -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-BSS=5" OTWSetScale -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-BSS=7" OTWSetScale -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-BSS=9" OTWSetScale -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-BSS=11" OTWSetScale -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-BSS=13" OTWSetScale -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-BSS=15" OTWSetScale -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-BSS=17" OTWStateStep -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-Cycle Object States" OTWToggleAutoScale -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-Vehicle Auto-Scaling" OTWSetObjDetail -1 0 0XFFFFFFFF 0 0 0 -2 "Set Object Density" OTWSetObjDetail -1 0 0XFFFFFFFF 0 0 0 -2 "Set Object Density" OTWSetObjDetail -1 0 0XFFFFFFFF 0 0 0 -2 "Set Object Density" OTWSetObjDetail -1 0 0XFFFFFFFF 0 0 0 -2 "Set Object Density" OTWSetObjDetail -1 0 0XFFFFFFFF 0 0 0 -2 "Set Object Density" OTWToggleGLOC -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-Blackout/Redout" OTWEnterPosition -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-Move To Coordinates" KevinsFistOfGod -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-Fist Of God" OTWToggleLocationDisplay -1 0 0XFFFFFFFF 0 0 0 -2 "Sim-World Location"
thanks
Eagle -
Hi Eagle,
ha, ha. I didn’t forgot one damn callback
The reason you can’t find them in my list is, that they are mostly depricated and not safe for future use.
There are also callbacks in your list which don’t work correctly (or at all) with BMS. The 2D Pit callbacks for an example (OTW Views…).
Others are simply replaced, e.g. CMS up/dn/lt/rt callbacks replace DropFlare / Chaff , ECM Consent / Standby.
To much too explain it for each callback. Of course you will find some working. But as stated above, they are outdated.
I also dropped all dev callbacks, as the guys who are concerned know them already and the other ones most likely do not care.Regards
-
Thx Kolbe! As it is now part of the U4 update, I pledge to make some effort (in the little spare time I have left) to change my current setup from my own custom keyfile to yours, that way it’ll be easier to share my setup (thinking about sharing combo of X52Pro+ Cougar MFD + G13 + BTV control panel).
-
Rgr,
if you need any help let me know… -
Hey Kolbe!
Thanks for your keyfile. It -really- comes in handy. very glad to see it in stock install now! -
hi Kolbe,
if I use the German layout, I will get the keys: Ins, Del, Pos1 etc… forming errors runtime error 13 type mismatch.
PageDn, PageUp … keys work with the english layout.
MS Excel 2010!
Westy 47DF
-
Hi Westy,
thanks for heads up. I will try to address this in my next update. -
Kolbe- 49th you are God……
Vorsprung durch Technik
-
hi Kolbe,
if I use the German layout, I will get the keys: Ins, Del, Pos1 etc… forming errors runtime error 13 type mismatch.
PageDn, PageUp … keys work with the english layout.
MS Excel 2010!
Westy 47DF
i found the error! :woohoo:
in column K of respect was wrong!
I have now added to the line to an absolute address field G5 “layout”Westy 47DF
-
Is there a new actual DL Link to geht the latest Version?
-
Hi Ronald,
long time no see. Hope, you’re fine…Not yet. I am working on an update but due to my move to a new house i’m delayed. Don’t know
how much time I will need to finish it, 'cause the next Buchenau LAN has to be prepared as well.
So the latest version is still in your BMS install folder -> User / Joystick / Generic / KolbeRegards
-
Hi Marco, sure, I am fine… looking Forward to Buchenau
What are you making new? I actual work out my cockpit-Software and everyone told me not to write the hole file new at one, they told me to take your key file becuase every Thing is in there, not the toggle commands, but all the direct commands.
I read that it should be in the Doc-Folder but I was not able to find it. I have no Generic, and also in Cougar just 3 directories… nothing from you. And this at all 3 BMS installations
Would it be possible for you to send it at ze_534en at Hotmail.com?
Greetings