PinkyandBrains Beginners guide
-
Why in Korea all Runways are of ptype 6 and not 9?
Runways are planar surfaces that do not need smoothing between edges. pType 6 is also appropriate for geometry on vehicle models that are angular (e.g. a box, geodesic dome, etc…).
-
just a small video thought to post it in case it is unknown to some. First teacher on this iirc was Eghi:
Greek writing is not important.
Red cross is left click yellow cross is right click -
Hey Arty,
Link to the switches only moving parts, then you don’t need to copy the whole model.Cheers,
EGHI -
well yes. kinda the same thing.
-
stragling to get the ptype23 but no joy for two days now…
Can please someone provide some info or screenshots on how to?
-
stragling to get the ptype23 but no joy for two days now…
Can please someone provide some info or screenshots on how to?
1.Note the ptype you want to change when exporting the model exporter writes how many verts and the ptype of them.
2. Open the model with LE and hit edit model.
3. Choose only the root and hit block select normally LE will choose all the verts of the model
4. Then on the dropdown menu choose batch converter.
5. on the change ptype of the batchconverter screen put the noted ptype u want to change on the upper box and underneath the ptype u want.
I always do it that way if it helps u -
There are 2 key settings.
The geomerty should have smooth groups.
Regards
Dave -
thanx let’s see how it goes… just 2 days lost… :lol:
-
well I did got the ptype 23
the geometry is a sphere red color. <- This is what I want to see in Falcon.
same dds for both difuse and opacity just a red color all over the place.the result is a sphere black and white where in every poly of the sphere the center is white and the border is black.
-
How is you texture mapping set up?
Regards
Dave -
Current Question - issue:
All polygon areas are overlaping in the uvw mapping.
Both textures (Difuse and opacity) are dx3 512x512 all red and the alpha is all white. No transparent areas.Maybe I forgot to replace the texture as I tried to make the light with 3 planes and had a texture with circle transparency where opacity was 100% at the center and full transparent at the borders.
Maybe this was why I had the white circle and black all around… But still why black and white instead of full red?Just to clear out and not confuse u I want it a ball full red. I tried to mimic the taxiway - runway lights which are visible from far and it’s a circle. But couldn’t create just a simple vertex in 3ds export it and view it in LE to set it as it should for taxilights.
If I select in LE one vertex point from the sphere and set it as point PT and the rest settings ptype zero color red 704 when I see it in Falcon it’s small and doesn’t show up from far away.Second side question for verification:
a. In Ptype 20 the lower you set the opacity the more bright in falcon. Right?
b. In Ptype 20 surfaces look a bit funny like transparent. this happens where the parts of the same model overlap each other, or one poly is inside or under another poly. Also if u turn the camera objects of ptype 9 appear infront of the object that is ptype20 although they are actually placed behind it. This is a code thing? or I have fubared the model? If I use ptype 23 instead of ptype 20 this “transparency” thing will be gone? If yes please could we have some details and options about factors affecting the ptype 23? like transparency alpha channel settings or tricks? Please?example - u can see the objects from behind are shown in front of the bridge, the cables are all ending inside the road but u can see near the road at some places they disappear, or you can see their ending which is inside the road polygon - box and they shouldn’t be visible, also at the center of the pylon instead of the road u see the cement underneath:
And finally a kind request if we could in Falcon Editor observe such things as if it was inside falcon. Meaning right now u can change the time in Falcon Editor but only terrain is affected. 3d Objects - features don’t display the correct properties like switches - dof’s - scripts. Having this options would save great amount of time on the struggle with the beast.
-
-
Current Question - issue:
All polygon areas are overlaping in the uvw mapping.
Both textures (Difuse and opacity) are dx3 512x512 all red and the alpha is all white. No transparent areas.Maybe I forgot to replace the texture as I tried to make the light with 3 planes and had a texture with circle transparency where opacity was 100% at the center and full transparent at the borders.
Maybe this was why I had the white circle and black all around… But still why black and white instead of full red?Just to clear out and not confuse u I want it a ball full red. I tried to mimic the taxiway - runway lights which are visible from far and it’s a circle. But couldn’t create just a simple vertex in 3ds export it and view it in LE to set it as it should for taxilights.
If I select in LE one vertex point from the sphere and set it as point PT and the rest settings ptype zero color red 704 when I see it in Falcon it’s small and doesn’t show up from far away.Second side question for verification:
a. In Ptype 20 the lower you set the opacity the more bright in falcon. Right?
b. In Ptype 20 surfaces look a bit funny like transparent. this happens where the parts of the same model overlap each other, or one poly is inside or under another poly. Also if u turn the camera objects of ptype 9 appear infront of the object that is ptype20 although they are actually placed behind it. This is a code thing? or I have fubared the model? If I use ptype 23 instead of ptype 20 this “transparency” thing will be gone? If yes please could we have some details and options about factors affecting the ptype 23? like transparency alpha channel settings or tricks? Please?example - u can see the objects from behind are shown in front of the bridge, the cables are all ending inside the road but u can see near the road at some places they disappear, or you can see their ending which is inside the road polygon - box and they shouldn’t be visible, also at the center of the pylon instead of the road u see the cement underneath:
https://s25.postimg.org/d19sejqdr/2017_02_05_221814.png
And finally a kind request if we could in Falcon Editor observe such things as if it was inside falcon. Meaning right now u can change the time in Falcon Editor but only terrain is affected. 3d Objects - features don’t display the correct properties like switches - dof’s - scripts. Having this options would save great amount of time on the struggle with the beast.
If you are trying to make the light at the top of the towers us the F4Plane in the geometry rollout.
I don’t think any of the pTypes produce solid non-transparent glowing textured polys.
Here is a LOD with all pTypes starting with pType 2 (the first glowing red cube)
Request noted but not likely to be any time soon.
Regards
Dave -
Thank you very much Dave.
I’m not demanding anything, the fact alone that the request is noted is more than enough.
I’ll look at the LOD and maybe it will enlight some things up.
THANK YOU.
-
just 2 vids that might help some ppl struggling with the beast:
volume select might be handy for terraforming in falcon… meaning create large areas or terrain in 3d and u want to cut it out exactly or close to the texture or sea - coastline area.
-
How to get rid the Ptype 26 when exporting? I want it 9
-
How to get rid the Ptype 26 when exporting? I want it 9
Ok found it. I had forgoten to put each texture " opaque"
Στάλθηκε από το SM-J500F μου χρησιμοποιώντας Tapatalk
-
This post is deleted! -
Wavey Dave first raw in your LOD file are all ptype 5.
I created everything from Scratch I hope I did them ok and maybe help some ppl as reference.
Please guys correct me if I’m wrong.
LOD File Download Link Click HERE
In Game Screen Shots:
DAY
NIGHT
NIGHT with NVG
Various from TGP and WPN in various modes:
The 3DS MAX file that I created the LOD is here for you to download if you want it.
And my ptypes excel file is here: https://1drv.ms/x/s!AtJa23BCDEy5gbsPNCJJF5h59JjreQ
All the 3d objects I created them with reference from my excel ptypes file, so I didn’t made any error from Wavey Daves document.
I hope this will be helpful to anyone.
BIG THANX to Wavey Dave for inspiring me with his LOD file… It was a very nice Kickstart m8.
-