Free for all: BVT control panel
-
I have IPAD3 WIFI 16 Gb, Jailbreak.
Only thing you need to do is add words “to HTML5” to the shortcut and it opens in fullscreen.
No hightech, even simple Dutchie as me can do
But I still don’t get what you mean by saying “Not yet found out how to get the panel 100% fitting on my IPAD screen” and later “Didn’t work for me. But just did find other solution: http://www.ispringsolutions.com/arti…n-an-ipad.html”
while my description, who doesn’t work for you:
iPad
-
Make sure your iPad is in landscape (horizontal) mode and not in portrait (vertical) mode
-
Open Safari
-
Surf to the IP you have set during step 4 of the installation on your pc by entering the IP in the URL bar and hitting enter or go.
-
Click on the icon to save bookmarks and choose “Add to homescreen”
-
Open the app on your iPad homescreen, now it’s fullscreen.
describes exactly the same as the URL you mention: http://www.ispringsolutions.com/articles/how-to-make-a-webpage-full-screen-on-an-ipad.html
PS: the “to html5” addition does nothing at all, it’s just the title for the app icon on your homescreen…
-
-
But I still don’t get what you mean by saying “Not yet found out how to get the panel 100% fitting on my IPAD screen” and later “Didn’t work for me. But just did find other solution: http://www.ispringsolutions.com/arti…n-an-ipad.html”
while my description, who doesn’t work for you:
describes exactly the same as the URL you mention: http://www.ispringsolutions.com/articles/how-to-make-a-webpage-full-screen-on-an-ipad.html
PS: the “to html5” addition does nothing at all, it’s just the title for the app icon on your homescreen…
Pls check PM.
-
I can’t get fullscreen on my android tablet unfortunately. Can’t figure out how to do it. I even used your instructions. Hopefully, I can figure it out, but I’m loving it so far.
-
I can’t get fullscreen on my android tablet unfortunately. Can’t figure out how to do it. I even used your instructions. Hopefully, I can figure it out, but I’m loving it so far.
Thx, glad you like IT.
How i described IT was for iPad only unfortunately.
On android,
Do you have browser called dolphin? That supports full screen i think -
Ok, I can get that. Will give it a try, thanks
-
I am trying to reprogram the ecm enable button but the changes do not work it is like the location for that button are wrong. Any help would be aprreciated. I was able to reprogram one problem with it allready having to do with the numpad enter key and all went well but no matter what I put in for the ecm enable button it stays the same. Thanks
-
Here is the code im trying to change no matter what i put in it always does control 2 and i want shift 2 even put in shift 3 and still does control 2
<area shape=“rect” coords=“20,265,67,313” href=“javascript:macro(”+2");" alt=“ECM ENBL” title=“ECM ENBL”> -
I figured it out it was the ipad history that was not taking the change cleared the history and then the new command took hold.
-
A big thanx m8u just made my day. I just got a Balckberry Playbook and I was sad as I couldn’t make much use of it with BMS… Now I can with my 3 winCE pda’s and my android Tablet almost have a complete virtual Cockpit.
Sorry for neglecting your app for so long as I thought it was for iPad only…
You deserve the first place in my Arty’s Hot List at the Software for Mobile devices section…
Edit: wow this is very time consuming to setup…
At least the default keyfiles should be ready… Has anyone done them so to share them???
-
A big thanx m8u just made my day. I just got a Balckberry Playbook and I was sad as I couldn’t make much use of it with BMS… Now I can with my 3 winCE pda’s and my android Tablet almost have a complete virtual Cockpit.
Sorry for neglecting your app for so long as I thought it was for iPad only…
You deserve the first place in my Arty’s Hot List at the Software for Mobile devices section…
Edit: wow this is very time consuming to setup…
At least the default keyfiles should be ready… Has anyone done them so to share them???
Thx Arty,
Indeed, it takes a bit of work to get the keybinds personalized. I should have to find some time to match them with the default or Kolbe’s BMS keyfile
-
I have a bit of a big problem…
I’m trying to set it up according to my likes and my Key file and I have a vertical problem…
I’m trying to assign the Ctrl+NUMPADENTER key but it’s not working…
I gave other Numpad keystrokes and they work just fine… This one just doesn’t…
Could u please have a look at it? Is it me?the command I send is:
<area shape=“rect” coords=“588,193,657,261” href=“javascript:macro(”^{NUMPADENTER}“);” alt=“ICP ENTR” title=“ICP ENTR”>In the server app it shows that is receives the command and it shows ok as the other commands… but it’s not handed to Falcon…
I tested it with monsters app and it works just fine… strange.
-
I have a bit of a big problem…
I’m trying to set it up according to my likes and my Key file and I have a vertical problem…
I’m trying to assign the Ctrl+NUMPADENTER key but it’s not working…
I gave other Numpad keystrokes and they work just fine… This one just doesn’t…
Could u please have a look at it? Is it me?the command I send is:
<area shape=“rect” coords=“588,193,657,261” href=“javascript:macro(”^{NUMPADENTER}“);” alt=“ICP ENTR” title=“ICP ENTR”>In the server app it shows that is receives the command and it shows ok as the other commands… but it’s not handed to Falcon…
I tested it with monsters app and it works just fine… strange.
I have the same issue. It’s like Falcon doesn’t recognize numpadenter. Even when I hit the actual numpad enter button on my keyboard it doesn’t recognize it in BMS UI.
-
That can’t be…
It works also with my winCE Pocket MFD app…How can we see if the command is wrong on the key file?
But it shows Ctrl Num Entr in Falcon UI… Really strange…
Unless it means Ctrl Numlock(key) and Enter…Can please someone enlighten us and tell us which key is this?
SimICPEnter 1022 0 0X9C 0 0 0 1 “ICP-Enter”
also how did he found out would be great…
-
That can’t be…
It works also with my winCE Pocket MFD app…How can we see if the command is wrong on the key file?
But it shows Ctrl Num Entr in Falcon UI… Really strange…
Unless it means Ctrl Numlock(key) and Enter…Can please someone enlighten us and tell us which key is this?
SimICPEnter 1022 0 0X9C 0 0 0 1 “ICP-Enter”
also how did he found out would be great…
According to Duncans Falcon BMS keyfile manual, the 0X9C is the keycode of relevance here. Those keycodes are leading 0X and then the corresponding XT scan code.
According to http://en.wikipedia.org/wiki/Scancode the code 9C stands for enter release, whereas it says the numpad enter is E0 9C. I’m also seeing that page mentions press and release, maybe it works with the presscode 1C (so 0X1C in the keyfile)?Don’t have time to test it myself right now…
-
For Ctrl + Numpad Enter:
SimICPEnter 1022 0 0X9C 2 0 0 1 “ICP-Enter”
Cheers,
Alohir -
BMS key files make use of the IBM XT “Make” Scan codes. This is true for most keys.
But there are some exeptions.
Some extended keys have a leading “E0” Byte.
In some cases the trailing scan code Byte is exactly the same than the scan code Byte of another key.
You named an example here:
ENTER = “Make Code”: 1C
NUM ENTER = “MAKE Code”: E0 1CTo distinguish between both the enhanced keys use the “Break” Code (without leading E0):
NUM ENTER = “Break Code”: 9CBut all you need to know is which keyboard key codes are save to use with your key files.
You find a complete list in YourBMSInstallFolder / Docs / Keyfile-generator.xls -> Sheet “Key Code Data”You might also take a look at my keyfile work in YourBMSInstallFolder / User / Joystick / Generic / Kolbe.
In the folder Keyboard Layout Files you’ll find two different Keyboard Codes PDFs (US Int & Ger).
They provide a better overview although not all possible keys are listed. I droped some to increase compatibility between
different keyboard locales. Also some Win keys can make some trouble while in windowed mode. -
In my case this works… after 3 days search…
SimICPEnter -1 0 0X9C 0 0 0 1 “ICP: ENTER Button - Push”
Koblbe-49th I got it from your key file
-
Hello,
Hope somebody can help to get EJECT function (CTRL E) working.
I want, in one keypress, to call for rescue choppers (keys Q9) and EJECT (keys CTRL e)
Best result sofar is:
href=‘javascript:macro(“q9”);pause(1000);macro(“^e”);’ alt=“EJECT” title=“EJECT”
So 1st the chopppers, then a short break and then eject.
In pit sofar I do get the subscreen for AWACS then a short pause en then I can hear the click for the canopy but no ejection.
Did try with commands like ^{e down} and {e up} but cannot figure out how to to do.
Anyone suggestions?
-
Hello,
Hope somebody can help to get EJECT function (CTRL E) working.
I want, in one keypress, to call for rescue choppers (keys Q9) and EJECT (keys CTRL e)
Best result sofar is:
href=‘javascript:macro(“q9”);pause(1000);macro(“^e”);’ alt=“EJECT” title=“EJECT”
So 1st the chopppers, then a short break and then eject.
In pit sofar I do get the subscreen for AWACS then a short pause en then I can hear the click for the canopy but no ejection.
Did try with commands like ^{e down} and {e up} but cannot figure out how to to do.
Anyone suggestions?
IIRC ejection will only work when ctrl-E is held for a certain amount of time (1 or 2 sec I think). The problem is that the key press the app sends, is just a press and not a hold. You should ask the developer of the touchdown app if there are 'hold’s possible and with what code I presume. (http://desrat.lightning-bolt.net/TouchDown/)
-
in the link where it says for keys it talks about delay also iirc…