Throttle Fix for Control
-
Sorry mate I don’t follow. Sellotape isn’t suitable, or it is?
Or should I just order some of that slick tape from my link?
Cello tape is bad.
UHMW Film Tape is good,
PTFE Tape is better
http://www.amazon.com/CS-Hyde-Conformable-Silicone-Adhesive/dp/B000FMUPBM/ref=sr_1_2?s=industrial&ie=UTF8&qid=1380164322&sr=1-2&keywords=PTFE+TapeMake sure the tape is as wide as the tension pad. Clean off all grease before applying. Regrease.
Use lithium grease, it doesn’t dissolve plastic like regular grease can. -
THanks guys I’ll try and source some PTFE adhesive tape. I take it you all still apply tin foil to the rubber grip bit?
Something like this http://www.ebay.co.uk/itm/Draper-12M-PTFE-Plumbing-Tape-Roll-ADHESIVES-/310487965741?pt=UK_Hand_Tools_Equipment&hash=item484a86602d
-
THanks guys I’ll try and source some PTFE adhesive tape. I take it you all still apply tin foil to the rubber grip bit?
Something like this http://www.ebay.co.uk/itm/Draper-12M-PTFE-Plumbing-Tape-Roll-ADHESIVES-/310487965741?pt=UK_Hand_Tools_Equipment&hash=item484a86602d
???
-
???
The tin foil I’m referring to is in this guide:
-
-
Is this the right kind of tape?
I was wondering the same thing.
If it is, does anyone know which width is the best fit for the throttle, as that tape is available in different widths from 19mm to 100mm?
-
I was wondering the same thing.
If it is, does anyone know which width is the best fit for the throttle, as that tape is available in different widths from 19mm to 100mm?
I’m giving it a go mate. £7 for 2m, so if it’s good I can send you some? I see you’re in the UK so it’d only be the cost of a stamp.
-
LOL. The way things are going with the postal service stamps will be £7 soon
I fitted Cubby’s HS+ kit to my TQS a few years back now so it’s the only mod I’ve not done yet. I think it’s time to venture back inside…
Let us know how you get on. Pictures, or it didn’t happen
-
THanks guys I’ll try and source some PTFE adhesive tape. I take it you all still apply tin foil to the rubber grip bit?
Something like this http://www.ebay.co.uk/itm/Draper-12M-PTFE-Plumbing-Tape-Roll-ADHESIVES-/310487965741?pt=UK_Hand_Tools_Equipment&hash=item484a86602d
No! That is plumbers tape. No adhesive, it will slip off. You need adhesive tape, like this stuff. http://www.amazon.com/CS-Hyde-Confor…ords=PTFE+Tape
Its not white, it is translucent greyish brown in color. It is hard to source and i have not had time to find it. I just woke up. It is usually very expensve.
Edit: Here is some cheaper stuff on eBay:
Tin foil is optional and has to be a flawlessly smooth application (no wrinkles). Foil duct tape works well.
-
Is this the right kind of tape?
No No NO! That stuff has fibreglass in it and it is rough.
This is the stuff
-
I’m trying to find some in the UK. I can order it from the US but the $46 postage seems excessive.
-
I’m trying to find some in the UK. I can order it from the US but the $46 postage seems excessive.
That stuff looks ok, but it is usually gray in colour. That looks clear, but it might be ok.
From UK and free shipping:
http://www.ebay.com/itm/2-ROLLS-SKIVED-PTFE-ADHESIVE-FILM-TAPE-2-X-36-YDS-BT-2245-2-PTFE-DOM-8-10-/151065731092?pt=LH_DefaultDomain_0&hash=item232c382014 -
The link above shows up for us as shipping to US only. I might just take you up on your offer if I can’t find anything closer.
What about this?
http://www.ebay.co.uk/itm/PTFE-Teflon-tape-for-mouse-gaming-/181213045413?pt=UK_Computing_ComputerComponents_MouseMats&hash=item2a3123a2a5
Edit: 12mm wide is not going to be enough methinks -
No No NO! That stuff has fibreglass in it and it is rough.
This is the stuff
Doh £8 wasted lol. How come is so hard to find this stuff in the UK
-
yeap… guys… buying for such thing is a total waste… u can find such material everywhere… from toys or products packaging, to A4 plastic transparent sheets… even if u have an old spare smartphone screen protection sheet whatever…
-
yeap… guys… buying for such thing is a total waste… u can find such material everywhere… from toys or products packaging, to A4 plastic transparent sheets… even if u have an old spare smartphone screen protection sheet whatever…
Unfortunately, PFTE adhesive teflon tape is hard to get and is far superior in its slickness than the options you list. Most plastics are not much better than the plastic of the cylinder in the Cougar. Its not a waste if you can get it for a decent price, but it is difficult.
-
Is teflon grease the right stuff to use? Also do I apply it between the tape and the pad, or just in the ‘bearings’?
-
You need red rubber grease such as this.
May i suggest it would be more helpful to others to move this thread to the Joysticks and input devices forum where people may expect to find such a discussion?
-
You need red rubber grease such as this.
May i suggest it would be more helpful to others to move this thread to the Joysticks and input devices forum where people may expect to find such a discussion?
Thanks. I was hoping to get some local tonight though. Would this do the job?
-
Probably, but i remember reading somewhere that certain types of grease and lubricants don’t mix well with plastic and rubber parts. They can dissolve the plastic over time. Red rubber grease was the safest from what i read and it’s what TM used when they greased things up at the factory. Up to you but better safe than sorry. When i ordered my little pot of the stuff from ebay it arrived in a couple of days.