Falcon MFD Software for android tablets
-
I’m running Norton 360 as my firewall; I added the following programs, set to “allow” in the firewall settings:
A:\Falcon BMS 4.32\Launcher.exe
A:\Falcon BMS 4.32\Bin\x86\Display Extraction.exe
A:\Falcon BMS 4.32\Bin\x86\Falcon BMS.exeI also set A:\FalconMFDServer\FalconMFDServer.exe itself to “allow.” (I think it might have been set to “auto” before, but I just switched it over to “allow” so that I wouldn’t have to worry about whether the Norton firewall was playing nice with it or not.)
After I downloaded the RAR of the MFD server program, I un-RAR’d it to a folder on my A: drive (it’s my data drive; my drive is a solid-state drive, on which Windows 8 is the only thing installed; everything else gets installed to the A: drive). So it didn’t install, per se–meaning that there’s no entry for it in the Apps list in the Windows 8 start screen (the equivalent of the start menu for previous versions of Windows). So I just created a shortcut to the .exe and pinned that shortcut onto the start screen.
After I changed the firewall settings by adding the “allow” permission for the four programs listed above, I restarted my router. But the firewall permissions and the router restart are the only things I did differently from when it wasn’t working for me. For what it’s worth, after I made those changes, if I click “Start Reading Falcon MFD,” the server program will crash. Leaving it alone, though, the images started coming up. I’ll play around with it some more to see if I can figure out anything else about what I may have done differently without realizing it, but for starters, see if adding those permissions in your firewall settings will do anything for you.
-
I’m running Norton 360 as my firewall; I added the following programs, set to “allow” in the firewall settings:
A:\Falcon BMS 4.32\Launcher.exe
A:\Falcon BMS 4.32\Bin\x86\Display Extraction.exe
A:\Falcon BMS 4.32\Bin\x86\Falcon BMS.exeI also set A:\FalconMFDServer\FalconMFDServer.exe itself to “allow.” (I think it might have been set to “auto” before, but I just switched it over to “allow” so that I wouldn’t have to worry about whether the Norton firewall was playing nice with it or not.)
After I downloaded the RAR of the MFD server program, I un-RAR’d it to a folder on my A: drive (it’s my data drive; my drive is a solid-state drive, on which Windows 8 is the only thing installed; everything else gets installed to the A: drive). So it didn’t install, per se–meaning that there’s no entry for it in the Apps list in the Windows 8 start screen (the equivalent of the start menu for previous versions of Windows). So I just created a shortcut to the .exe and pinned that shortcut onto the start screen.
After I changed the firewall settings by adding the “allow” permission for the four programs listed above, I restarted my router. But the firewall permissions and the router restart are the only things I did differently from when it wasn’t working for me. For what it’s worth, after I made those changes, if I click “Start Reading Falcon MFD,” the server program will crash. Leaving it alone, though, the images started coming up. I’ll play around with it some more to see if I can figure out anything else about what I may have done differently without realizing it, but for starters, see if adding those permissions in your firewall settings will do anything for you.
Thanks for your help. I just tried this and still no joy. I allowed all of the items listed above and reset my router afterwards.
-
Catch - Thanks for info. I know that I have tried it with firewall off.
-
I googled for
why some one cant take mfd display from server.The result is
according my code you have to have “root” priviligies.so i am trying to change my codes
to works with out “root” priviligies.But i need a time
Thanks
-
I googled for
why some one cant take mfd display from server.The result is
according my code you have to have “root” priviligies.so i am trying to change my codes
to works with out “root” priviligies.But i need a time
Thanks
Thanks for all your help komurcu!
-
Can someone explain me why some OSB buttons( from 20 to 28 ) is not appearing on the server program?
if they appearing on my key file? How can i add more?
the red highlighted keys dont work on my tablet.
SimCBEOSB_BRTDOWN_L 1101 0 0X21 6 0 0 1 “LMFD-Brightness Down”
SimCBEOSB_BRTUP_L 1100 0 0X22 6 0 0 1 “LMFD-Brightness Up”
SimCBEOSB_1L 1025 0 0X2 6 0 0 1 “LMFD OSB-1”
SimCBEOSB_2L 1026 0 0X3 6 0 0 1 “LMFD OSB-2”
SimCBEOSB_3L 1027 0 0X4 6 0 0 1 “LMFD OSB-3”
SimCBEOSB_4L 1028 0 0X5 6 0 0 1 “LMFD OSB-4”
SimCBEOSB_5L 1029 0 0X6 6 0 0 1 “LMFD OSB-5”
SimCBEOSB_6L 1030 0 0X7 6 0 0 1 “LMFD OSB-6”
SimCBEOSB_7L 1031 0 0X8 6 0 0 1 “LMFD OSB-7”
SimCBEOSB_8L 1032 0 0X9 6 0 0 1 “LMFD OSB-8”
SimCBEOSB_9L 1033 0 0XA 6 0 0 1 “LMFD OSB-9”
SimCBEOSB_10L 1034 0 0XB 6 0 0 1 “LMFD OSB-10”
SimCBEOSB_11L 1039 0 0X4F 6 0 0 1 “LMFD OSB-11”
SimCBEOSB_12L 1038 0 0X50 6 0 0 1 “LMFD OSB-12”
SimCBEOSB_13L 1037 0 0X51 6 0 0 1 “LMFD OSB-13”
SimCBEOSB_14L 1036 0 0X4B 6 0 0 1 “LMFD OSB-14”
SimCBEOSB_15L 1035 0 0X4C 6 0 0 1 “LMFD OSB-15”
SimCBEOSB_16L 1044 0 0X4D 6 0 0 1 “LMFD OSB-16”
SimCBEOSB_17L 1043 0 0X47 6 0 0 1 “LMFD OSB-17”
SimCBEOSB_18L 1042 0 0X48 6 0 0 1 “LMFD OSB-18”
SimCBEOSB_19L 1041 0 0XFFFFFFFF 0 0 0 1 “LMFD OSB-19”
SimCBEOSB_20L 1040 0 0XFFFFFFFF 0 0 0 1 “LMFD OSB-20"” -
Can someone explain me why some OSB buttons( from 20 to 28 ) is not appearing on the server program?
if they appearing on my key file? How can i add more?
the red highlighted keys dont work on my tablet.
SimCBEOSB_BRTDOWN_L 1101 0 0X21 6 0 0 1 “LMFD-Brightness Down”
SimCBEOSB_BRTUP_L 1100 0 0X22 6 0 0 1 “LMFD-Brightness Up”
SimCBEOSB_1L 1025 0 0X2 6 0 0 1 “LMFD OSB-1”
SimCBEOSB_2L 1026 0 0X3 6 0 0 1 “LMFD OSB-2”
SimCBEOSB_3L 1027 0 0X4 6 0 0 1 “LMFD OSB-3”
SimCBEOSB_4L 1028 0 0X5 6 0 0 1 “LMFD OSB-4”
SimCBEOSB_5L 1029 0 0X6 6 0 0 1 “LMFD OSB-5”
SimCBEOSB_6L 1030 0 0X7 6 0 0 1 “LMFD OSB-6”
SimCBEOSB_7L 1031 0 0X8 6 0 0 1 “LMFD OSB-7”
SimCBEOSB_8L 1032 0 0X9 6 0 0 1 “LMFD OSB-8”
SimCBEOSB_9L 1033 0 0XA 6 0 0 1 “LMFD OSB-9”
SimCBEOSB_10L 1034 0 0XB 6 0 0 1 “LMFD OSB-10”
SimCBEOSB_11L 1039 0 0X4F 6 0 0 1 “LMFD OSB-11”
SimCBEOSB_12L 1038 0 0X50 6 0 0 1 “LMFD OSB-12”
SimCBEOSB_13L 1037 0 0X51 6 0 0 1 “LMFD OSB-13”
SimCBEOSB_14L 1036 0 0X4B 6 0 0 1 “LMFD OSB-14”
SimCBEOSB_15L 1035 0 0X4C 6 0 0 1 “LMFD OSB-15”
SimCBEOSB_16L 1044 0 0X4D 6 0 0 1 “LMFD OSB-16”
SimCBEOSB_17L 1043 0 0X47 6 0 0 1 “LMFD OSB-17”
SimCBEOSB_18L 1042 0 0X48 6 0 0 1 “LMFD OSB-18”
SimCBEOSB_19L 1041 0 0XFFFFFFFF 0 0 0 1 “LMFD OSB-19”
SimCBEOSB_20L 1040 0 0XFFFFFFFF 0 0 0 1 “LMFD OSB-20"”because did not activate those buttons.
If you want to use please give me names of buttons.
Next version i can activate them -
The program is working fine but I have one small problem with the MFD’s. When I start up the program the two MFD’s are situated next to each other. When I touch a button of the right MFD button the right MFD jumps for a small part on top of the left MFD. In that case I can’t touch the button on the right side of the left MFD. Do I have to make a change in the setup?
-
ok i will fix the problem.
-
Can you tell me how long it takes before you have fixed the problem? Where do you place the new version of the program? Thanks in advance. Best regards Erik
-
tomorrow i will.
i was verry ill -
Take care of your health first!
-
-
i am writing new version.
so it will take time
may be 2 weeks.please wait
-
Get well
Then remember hires version
-
I would like to know what my MFD setting is saved as. I had a hard drive crash and re-installed falcon bms with update 7 in a
bad drive so I want to move the old MFD setting into the newly installed bms. I would appreciate the help. -
Ernestwinslow I would like to know what my MFD setting is saved as. I had a hard drive crash and re-installed falcon bms with update 7 in a bad drive so I want to move the old MFD setting into the newly installed bms. I would appreciate the help.
all setting in FalconMFDServer files.
you just run server program. -
there are some screen shoots from new version.
and there is good new.
we can get image from server on Samsung Tablets
-
Great, nice
going to test soon
Thank you again
-
why is it released?