Falcon MFD Software for android tablets
-
PM’ed. Thanks for your help.
-
Okay Dracfalcon, your keyfile worked, the buttons on the tablet registered, loaded it into the sim and it worked there too (but screwed up my HOTAS assignments). When I loaded in my keyfile and tried the tablet buttons I got the Key does not match error. I selected key assignments for all the yellow lines (trial and error till I found one available) but still got the same error. Also your file seems to have a lot of command conflicts, how do you get it to export? (or not using BMS keyfile editor?)
Thanks for helping me with this issue, I guess the eventual resolution will be valuable for others too.
-
Okay Dracfalcon, your keyfile worked, the buttons on the tablet registered, loaded it into the sim and it worked there too (but screwed up my HOTAS assignments). When I loaded in my keyfile and tried the tablet buttons I got the Key does not match error. I selected key assignments for all the yellow lines (trial and error till I found one available) but still got the same error. Also your file seems to have a lot of command conflicts, how do you get it to export? (or not using BMS keyfile editor?)
Thanks for helping me with this issue, I guess the eventual resolution will be valuable for others too.
I sent two emails to you. You have two options: (1) Use my keyfile and reprogram your HOTAS to it, or (2) Using notepad, copy and paste the command lines you need from my keyfile to your keyfile. There may be other options, but these are the two I can think of.
-
komurcu,
I’ve been using your server/app for a couple of years now, and I never fly without it; the two-tablet setup works great for me. I’d like to submit a feature request: Would it be possible to add the TWP buttons to the ICP/RWR mode, perhaps just beneat the RWR? It seems there’d be room if the TWP buttons were arranged in two rows of three buttons each, rather than the three-row triangular layout in the actual cockpit. I think it would be great to be able to not just see the RWR but operate it as well through the app. Thanks for everything you’ve done with building this great resource!
-
Okay Dracfalcon, your keyfile worked, the buttons on the tablet registered, loaded it into the sim and it worked there too (but screwed up my HOTAS assignments). When I loaded in my keyfile and tried the tablet buttons I got the Key does not match error. I selected key assignments for all the yellow lines (trial and error till I found one available) but still got the same error. Also your file seems to have a lot of command conflicts, how do you get it to export? (or not using BMS keyfile editor?)
Thanks for helping me with this issue, I guess the eventual resolution will be valuable for others too.
oilmanzz, have you tested Conrad Traxx solution in post #761? Basically replace all “0x” in your keyfile with “0X”. Had the same problem as you and this solved it.
-
Thx for the key file works great many thx!!!
-
have you tested Conrad Traxx solution in post #761? Basically replace all “0x” in your keyfile with “0X”.
Hey PedroF, yes this has solved it for me also, I missed this first time through the thread. Did a find and replace and all working good now, but I have learned a lot about the keyfile structure, etc. going through this exercise. Kudos out to Dracfalcon too for his support.
Hmmm, now to try 2 tablets……
-
Hey PedroF, yes this has solved it for me also, I missed this first time through the thread. Did a find and replace and all working good now, but I have learned a lot about the keyfile structure, etc. going through this exercise. Kudos out to Dracfalcon too for his support.
Hmmm, now to try 2 tablets……
Go for the 2 tablets. I have it, and it works great! Always available for support.
-
:headb:
-
I use your s/w everytime. Thanks.
But it consume 27% of CPU.
As i guess this should be critical reason reduce FPS of BMS. -
I use your s/w everytime. Thanks.
But it consume 27% of CPU.
As i guess this should be critical reason reduce FPS of BMS.it should not be like that
which windows u are using -
I use your s/w everytime. Thanks.
But it consume 27% of CPU.
As i guess this should be critical reason reduce FPS of BMS.+1.
I found that if I only run the MFD’s and ICP (on twin tablets) then memory use is minimal, it’s the flight data option that consumes memory.
Windows 10 Pro.
-
How I can install with Falcon 4.33.1? I can´t do it yet.
-
How I can install with Falcon 4.33.1? I can´t do it yet.
What exactly is the problem? Be more specific.
-
Hi guys
You can download server from below
It supporting 4.33 U1FalconMFD Server-2 (For PC)
Download FalconMFDServer-2 (Ver 3.4.0.0) -
This post is deleted! -
it should not be like that
which windows u are usingFalconMFDServer-2 (Ver 3.4.0.0), No falcon BMS is running.
While client is connected, 30% of CPU is consumed.
When i cut the connection off, 0% of CPU is consumedI am using Windows 8.1 k (64bit) and
CPU: i5-3570 @3.40GHz 3.8Ghz
RAM: 8GB
GPU: GTX 660Q1> I have to run falcon BMS? But i cannot check out. I have only one monitor.
Q2> Your s/w is optimized for 32bit? -
FalconMFDServer-2 (Ver 3.4.0.0), No falcon BMS is running.
While client is connected, 30% of CPU is consumed.
When i cut the connection off, 0% of CPU is consumedI am using Windows 8.1 k (64bit) and
CPU: i5-3570 @3.40GHz 3.8Ghz
RAM: 8GB
GPU: GTX 660Q1> I have to run falcon BMS? But i cannot check out. I have only one monitor.
Q2> Your s/w is optimized for 32bit?i think problem is on your pc
because i checked , cpu value is 0 or 1also on flight there is no huge cpu value
please first run server and then run falcon bms
-
i think problem is on your pc
because i checked , cpu value is 0 or 1also on flight there is no huge cpu value
please first run server and then run falcon bms
When i changed to window mode(external display) and ran Falcon BMS, the consumption was decreased to 3~4%.
I guess your s/w looking for BMS very hard.
-
I have the problem before version,too.Every 5 ~ 10 min lag 1 ~ 2 secend.The problem have long time.