@airtex2019
Thank you very much
Posts made by Bkrull
-
RE: Controllers not Working Together
-
RE: Controllers not Working Together
@airtex2019
Hi Airtex
It depends on what order I set them up up. The last one I set up is the one that works. It’s frustrating because it’s a great simulator.
Thanks for your reply and help. It’s much appreciated.
Pancho -
Controllers not Working Together
Hello all. Pancho here.
I love BMS but I’m having some nagging issues with my controllers—Warthog throttle and tm16000m flight stick. Regardless of how I set everything up, either the joystick works or the throttle works but not both together.Would one of y’all please tell how to properly set both controllers so that they work together?
Thanks in advance for your help.
Blue skies and happy hunting
Pancho.
-
Setup.cfg is missing error message when trying to reinstall Falcon BMS
Hello, all.
I’ve got a bit of a perplexing problem here when trying to reinstall Falcon BMS. For some reason, BMS would not launch so I uninstalled it. I downloaded the U1-U7 update from the BMS website and tried to run it. When I did, I received a “set.cfg is missing” error message. I tried other downloads, including U1-U6 and got the same message. Any ideas as to what I’m doing wrong?
Any help would be greatly appreciated.
Thanks in advance and Happy Holidays to all.
Bill -
RE: Cougar mfds
Hello, Gancio,
Do you happen to know what a three letter abbreviation for a flight control stick? I’m trying to register for Viperpits and that question is preventing me from doing so.
Thanks.
Bill -
RE: Instructor needed
Whitepony, I would very much like to join your group. Would you please send then info? Thanks very much.
Neystratiou, I’ve got a ton of questions. I’ll start writing them down. Thanks so much for the offer.
You’re right, Badger, I think the VS is the best route for me.
Bill -
RE: Can't get Thrustmaster controllers, Saitek rudder pedals to work
Okay, the controllers are working again. Stubbies was probably right. I reloaded Morphine’s profile, restarted the sim and, voila’, everything was working. Thanks a lot to all those of you who helped. I appreciate you and this forum.
-
RE: Can't get Thrustmaster controllers, Saitek rudder pedals to work
Best I can remember, I loaded Morphine’s Profile–put the key file in the in the config folder and loaded the .tmc file in TARGET Script Editor. However, today I had to re-install Falcon BMS and now the controllers don’t work. What a puzzle.
-
RE: Falcon BMS not starting–Part II--He's back again.
Yes, I sure do. However, it’s RUNNING!!! I went to disable the SLI and lo and behold, it was already disabled. So, I enabled it and it launched! Now, all I have to is install the updates. For some reason, only the base installed.
-
RE: Falcon BMS not starting–Part II--He's back again.
Well, this is very frustrating. I’ve tried everything and nothing works.
-
RE: Falcon BMS not starting–Part II--He's back again.
Thanks, I’ll be sure to do that
-
RE: Falcon BMS not starting–Part II--He's back again.
Bill.
If you have ruled out Antivirus.
*Yes, I’ve disabled itDoes the launcher run OK an then Falcon doesn’t ?
*That’s correct
Set all as “Set by application” in your GPU control interface. Run the launcher.
*?
Disable SLI in your GPU control interface. Run the launcher.
*?
Then try The “Falcon BMS.exe” directly. You will find it in " whatever:Falcon/Bin/x86"
*Done, no luckDisconnect all your Control inputs, joysticks, pedals ect and shut down any software, Run the launcher.
*Will do and I’ll let you knowThen try The “Falcon BMS.exe” directly. You will find it in " whatever:Falcon/Bin/x86"
*DoneDo you have more the one Monitor have you moved or removed any, and are other “games” functional" ?
*NoTake a few steps back:
How did you show the Installer that you have a valid copy of the original Falcon.exe ?
*Clicked on the original discYou don’t have the original Falcon4 installed do you? And then try installing over the top? Sorry if you think that’s a dumb question.
*NoHave you tried running the “Launcher” before doing the updates. ?
*No, but I’ll tryIs your wife/girlfriend/partner computer savvy. And knows what will happen if you start flying the viper?
*She’s great on the hardware–not so good on softwareHow did you get it to run before, what did you do different.
*I’ve tried to duplicate my efforts with no luckWhat is the meaning of life?
*My dog is smarter than me
ShadDoes the launcher run OK an then Falcon doesn’t ?
*That’s correct
Set all as “Set by application” in your GPU control interface. Run the launcher.
*?
Disable SLI in your GPU control interface. Run the launcher.
*?
Then try The “Falcon BMS.exe” directly. You will find it in " whatever:Falcon/Bin/x86"
*Done, no luckDisconnect all your Control inputs, joysticks, pedals ect and shut down any software, Run the launcher.
*Will do and I’ll let you knowThen try The “Falcon BMS.exe” directly. You will find it in " whatever:Falcon/Bin/x86"
*DoneDo you have more the one Monitor have you moved or removed any, and are other “games” functional" ?
*NoTake a few steps back:
How did you show the Installer that you have a valid copy of the original Falcon.exe ?
*Clicked on the original discYou don’t have the original Falcon4 installed do you? And then try installing over the top? Sorry if you think that’s a dumb question.
*NoHave you tried running the “Launcher” before doing the updates. ?
*No, but I’ll tryIs your wife/girlfriend/partner computer savvy. And knows what will happen if you start flying the viper?
*She’s great on the hardware–not so good on softwareHow did you get it to run before, what did you do different.
*I’ve tried to duplicate my efforts with no luckWhat is the meaning of life?
*My dog is smarter than me
Shad -
RE: Falcon BMS not starting–Part II--He's back again.
I’m trying that right now, Seabass.
Bill -
RE: Falcon BMS not starting–Part II--He's back again.
Okay, I’ve disabled the intro movie, removed .vhs files, uninstalled it, ran the registry cleaner and re-installed it. The same ol’ same ol’ results.
-
RE: Falcon BMS not starting–Part II--He's back again.
I am running the latest drivers.
-
RE: Falcon BMS not starting–Part II--He's back again.
Thanks so much you guys. I got it running and then a few hours later it crashed and I had to reboot my PC. I’m going to re-download the latest iteration–1-7 if I can it again–then reinstall it.
-
RE: Can't get Thrustmaster controllers, Saitek rudder pedals to work
Thanks to you, I’ve got it working. Thanks, guys.
-
Falcon BMS not starting–Part II--He's back again.
Hello,I thought the people in this forum had solved my issue with BMS not launching. We had it fixed for a few hours, then I rebooted the PC and then, dang it, it failed to launch. I noticed that it is running in Task Manager, just not showing up on the screen. When I first try to launch it, the screen turns black and then goes back to the desktop. To date, we’ve tried deleting the two .vhs files, re-installing it and deleting the DX 9 display file in the Config folder. By the way, this time around there is no DXdisplay.dsp file in the config file. Adding to the frustration is the fact I couldn’t get the controllers to work when the sim was running. This is making me crazy.
My system is:
My system is:
*Desktop, Windows 7 Ultimate
*Intel Core i7 Extreme Edition 6 core 3.5 GHz
*Dual Invidia video cards GTX 680
*2 SSD 125 gigs
*16 gigs RAM
*Saitek Combat Pro rudders
Thrustmaster HOTAS Warthog controllersThis is frustrating–I really want to fly this sim. Thank so so much for your help.
Bill Krulldx
-
RE: Can't get Thrustmaster controllers, Saitek rudder pedals to work
Hey, guys, thanks for your replies. I do have TARGET installed and it does recognize the joystick and throttle. Yes, I see Thrustmaster Combined. In fact, the controllers show indications that they’re working in the Controls screen but that doesn’t translate to the cockpit. No joy there. It’s a moot point at this moment, though. Early on, I had problems getting it to launch. I had it working for a few hours then rebooted and it quit working again.
-
Can't get Thrustmaster controllers, Saitek rudder pedals to work
Hello, all. I’ve finally successfully got Falcon 4.32 to work. However, to date, I’ve been unable to get my Thrustmaster HOTAS Warthog and Saitek Combat Pro rudder pedals to work. I’ve downloaded Mud’s profile and followed his instructions but no joy. I can upload some screenshots if you wish. I appreciate your help.
Thanks
Bill Krull