Weapon Delivery Planner released
-
Sure there is
After you have done the things you want to do in WDP, save the DTC.
Go back to the BMS UI and load the DTC (in UI)gr Falcas
-
Falcas is correct. I open WDP while BMS is open in the 2D map with no problemsā¦not necessary to have BMS closed.
-
Sure there is
After you have done the things you want to do in WDP, save the DTC.
Go back to the BMS UI and load the DTC (in UI)gr Falcas
That only works one time.:( If I do as you said and then end the flight but still in Falcon, but switch to WDP and make another change, save the DTC, return to Falcon, load the Falcon DTC, the change I made in WDP wonāt be in the Falcon DTC. In order for the last WDP change to be effective in Falcon, I had to exit Falcon, switch to WDP, save the WDP DTC even though it was green. Then I started Falcon, loaded the TEmission, loaded the Falcon DTC, and this time the last WDP change was effected in Falcon.
To sum up, it seems that I can only make one change to WDP while I have Falcon active. If I need to make another change after I end the TEmission, I got to exit Falcon and also save the WDP DTC again, even though it was green. Then start Falcon again.
-
And yes this is the rule with falcon. Every time you end a mission you restart falcon before going for the next one.
-
Hi,
A little test version for those who are using the Kneeboard Updater tool.
Anybody that want to test this, go ahead and be so kind to report if it still has issues or not.
http://www.weapondeliveryplanner.nl/files/wdp/Weapon_Delivery_Planner_3.7.0.63.7z- Added, New feature the user can select (found under Settings) if the saved Datacard is compatible with Kneeboard Updater.
If you are reading the Datacard with a remote PC or PDA, its recommended to have this feature switched OFF.
Gr Falcas
- Added, New feature the user can select (found under Settings) if the saved Datacard is compatible with Kneeboard Updater.
-
well that was fast Falcas downloading it now and testing it out actully here in just a second
-
Falcas i am getting this error when i run the program on windows 10. i have uninstalled .net 3.5 and 4.5 and reinstalled them and i still got what is below. can you make heads or tails of it?
it seems when i get this error it wont save anything but the data card main file. none of the pictures are saved. I am not sure about the DTC yet, i am going to go in game and see. I have closed WDP and reopened it and still the same error soon as i try to load a mission file
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
at WeaponDeliveryPlanner.cntDataCard.CreateWeatherList()
at WeaponDeliveryPlanner.cntDataCard.OpenFile(String fName)
at WeaponDeliveryPlanner.cntDataCard.OpenMission()
at WeaponDeliveryPlanner.fclsMain.mnuOpenMission_Click(Object sender, EventArgs e)
at System.Windows.Forms.MenuItem.OnClick(EventArgs e)
at System.Windows.Forms.MenuItem.MenuItemData.Execute()
at System.Windows.Forms.Command.Invoke()
at System.Windows.Forms.Command.DispatchID(Int32 id)
at System.Windows.Forms.Control.WmCommand(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.6.96.0 built by: NETFXREL2STAGE
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
ā--------------------------------------
WeaponDeliveryPlanner
Assembly Version: 3.7.0.63
Win32 Version: 3.7.0.63
CodeBase: file:///C:/Weapon%20Delivery%20Planner/WeaponDeliveryPlanner.exeMicrosoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 14.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dllSystem
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dllSystem.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dllSystem.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dllSystem.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dllSystem.Runtime.Remoting
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dllSystem.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dllSystem.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dllBMSUtils
Assembly Version: 1.5.5.0
Win32 Version: 1.5.5.0
CodeBase: file:///C:/Weapon%20Delivery%20Planner/BMSUtils.DLLSystem.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dllSystem.Transactions
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dllSystem.EnterpriseServices
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dllSystem.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dlldbwdp
Assembly Version: 1.4.0.0
Win32 Version: 1.4.0.0
CodeBase: file:///C:/Weapon%20Delivery%20Planner/dbwdp.DLLLzssManaged
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Weapon%20Delivery%20Planner/LzssManaged.DLLLzssNative
Assembly Version: 0.0.0.0
Win32 Version:
CodeBase: file:///C:/Weapon%20Delivery%20Planner/LzssNative.DLL************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.For example:
<configuration></configuration>
-
And yes this is the rule with falcon. Every time you end a mission you restart falcon before going for the next one.
Shhhhhā¦I never do. ā¦
-
I also donāt do thisā¦
-
Hi,
@sirbum69:Falcas i am getting this error when i run the program on windows 10. i have uninstalled .net 3.5 and 4.5 and reinstalled them and i still got what is below. can you make heads or tails of it?
I does not make sense to start reinstalling .Net when a tool starts up fine. If you get a crash, the only thing you have to do is read what the error message is telling you.
And you donāt need to be a coder to have a clue what is going on************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
at WeaponDeliveryPlanner.cntDataCard.CreateWeatherList()
at WeaponDeliveryPlanner.cntDataCard.OpenFile(String fName)
at WeaponDeliveryPlanner.cntDataCard.OpenMission()Look at the beginning of the report, āIndex was outside the bounds of the arrayā and āat WeaponDeliveryPlanner.cntDataCard.CreateWeatherList()ā
This means that WDP has a problem when creating the weather list.Any information on the mission you are using? Theater? Weather?
Gr Falcas
-
I also donāt do thisā¦
Ditto. I restart after changing theaters but I canāt imagine restarting after each mission, especially if in MP mode with a bunch of guys connected.
-
Hi,
I does not make sense to start reinstalling .Net when a tool starts up fine. If you get a crash, the only thing you have to do is read what the error message is telling you.
And you donāt need to be a coder to have a clue what is going onLook at the beginning of the report, āIndex was outside the bounds of the arrayā and āat WeaponDeliveryPlanner.cntDataCard.CreateWeatherList()ā
This means that WDP has a problem when creating the weather list.Any information on the mission you are using? Theater? Weather?
Gr Falcas
sorry i only reinstalled .net because i had read somewhere earlier that it would take care of it.
The campain i am flying is the Korea strong campaign, weather i guess would be the weather it creates. far as i know its stock korea that comes with 4.32 BMS -
Ok, give me some time to give strong Korea a go.
So far I have not been able to reproduce any crash here.Gr Falcas
-
Hi Falcas:
Iām also having a problem installing the latest version of WDP on Windows XP SP3. I am getting the same message from the installer that others have reportedā¦
āInstallation Incomplete
The installer was interrupted before Weapon Delivery Planner 3.7.0.62 could be installed. You need to restart the installer to try again.āI have net 4.0 and the C++ 2010 redist installed.
I do not get this problem if I install WDP 3.4.
A search in google returns something about IIS6 not being configured, but I have no idea whether that applies to XP or if that is the source of the problem.
Any ideas on what the problem might be?
Thanks,
Ilmars -
Hi Guys,
In the program files, can i find anywhere the coordination card is a word/xls file so i can use it outside the of the WDP? -
Error Installing WDP.
Version 3.7.0.62 Installation Error
The feature you are trying to use is on a network resource that is unavailable. NOT TRUE itās my local hard drive
Enter an alternate path to a folder containing the installation package WDP. msi in the box below.pointing me here: C:\Users\Sandman\AppData\Local\Temp\Rar$EXa0.061\
Not sure why itās asking this iām using the setup and wdp.mis from the unzipped folder that I downloaded from your site.
Iāve tried pointing it to the unzipped folder that contains the WDP.msi but no luck.
Not sure whatās going on here. Back to the old version until I can get some help with this one.
-
Are you on a XP maschine?
Gr Falcas
-
No Iām using Windows 7
-
Hi,
I does not make sense to start reinstalling .Net when a tool starts up fine. If you get a crash, the only thing you have to do is read what the error message is telling you.
And you donāt need to be a coder to have a clue what is going onLook at the beginning of the report, āIndex was outside the bounds of the arrayā and āat WeaponDeliveryPlanner.cntDataCard.CreateWeatherList()ā
This means that WDP has a problem when creating the weather list.Any information on the mission you are using? Theater? Weather?
Gr Falcas
+1 for the problem the problem sirbum69 has.
I didnāt experience any problems when I made a TE and used WDP.
For the weather in the campaign and TE I used the cloudpack mod and modified the āFogā tab as suggested in the mod of āCloudpackā to have realistic weather.
My campaign is also the standard Korea theater and I also think āStrongā, although Iām not 100% sure on āStrongā and Iām not home to check it nowā¦ -
Falcas, the Kneeboard update is working correctly for me, thanks for taking the time to make the fix.
Respectfully
Joe